Axminster AWEPT106 Planer Blades 260mm T1 HSS Pack of 2 Knives Made in the UK by Xcalibur Tooling
Consistent timber preparation relies on planer knives that stay accurately positioned while maintaining a clean cutting edge through repeated machining. These 260mm Xcalibur Tooling blades are produced specifically for the Axminster AWEPT106 and supplied as a matched pair for coordinated cutter-block replacement.
Manufactured in the UK from high-tungsten T1 High Speed Steel, the blades are fully heat-treated, stress-relieved, and precision ground to approximately a 40° cutting bevel. Their resharpenable construction makes them suitable for regular hardwood and softwood preparation where reliable stock dimensioning and surface quality are important.
Key Features
-
260mm Machine-Specific Length: Each knife measures 260mm and is manufactured to suit the Axminster AWEPT106 planer/thicknesser for accurate positioning within the cutter block.
-
T1 High Speed Steel Construction: High-tungsten T1 HSS provides strong edge retention, toughness, and resistance to heat generated during repeated planing operations.
-
Matched Pack of Two: Both knives can be replaced together, helping maintain consistent cutting height and balanced material removal across the working width.
-
Approximately 40° Cutting Bevel: Precision grinding to around 40° provides a practical balance between cutting sharpness, edge strength, and the quality of the planed finish.
-
UK-Manufactured Replacement: Workshops already sourcing products such as axminster bandsaw blades can also choose these Xcalibur Tooling planer knives as a machine-specific option for timber preparation.
Applications
-
Prepare rough-sawn hardwood and softwood before furniture making, cabinetry, joinery, sanding, assembly, or finishing.
-
Dimension boards to a more consistent thickness before routing, shaping, jointing, or other workshop operations where accurate stock preparation is required.
-
Restore cutting quality when existing knives begin producing surface ridges, increased tear-out, rough patches, or uneven material removal.
-
Resharpen the T1 HSS cutting edges when necessary, provided the correct approximately 40° bevel and safe blade dimensions are maintained.
-
Use the replacement pair in professional or serious woodworking environments where repeated timber preparation requires predictable cutting performance.
Why Choose Our Planer Blades?
-
The machine-specific 260mm length provides a dedicated replacement for the Axminster AWEPT106 rather than relying on generic planer knives.
-
T1 HSS combines dependable edge retention with resharpenability, making the blades suitable for workshops carrying out frequent hardwood and softwood processing.
-
Replacing both knives together helps maintain consistent cutter geometry and reduces the likelihood of uneven machining caused by different blade heights or wear levels.
-
Tight dimensional tolerances support accurate cutter-block seating, helping reduce vibration and promote more even material removal across the workpiece.
-
For workshops investing in premium woodworking tools, these UK-manufactured Xcalibur Tooling blades provide a practical option for maintaining accurate timber dimensioning and surface preparation.
FAQs
1. Why are the AWEPT106 knives supplied as a pair?
The cutter block uses two knives, so replacing them together helps maintain equal cutting height and balanced material removal. A matched pair can also support a more consistent finish across the timber.
2. Can these 260mm planer blades be resharpened?
Yes. The T1 HSS knives are designed to be resharpened multiple times when sufficient blade material remains. The original cutting geometry should be maintained during sharpening.
3. Are these blades suitable for hardwood and softwood?
Yes. T1 HSS provides the toughness and edge retention needed for regular processing of both hardwood and common softwood. Feed rate and cutting depth should still suit the timber.
4. What signs indicate that the planer knives need sharpening?
Rougher surfaces, increased tear-out, visible ridges, or greater feed resistance can indicate declining edge sharpness. Blade condition and cutter-block adjustment should both be checked.
5. What should I check after fitting the replacement blades?
Ensure both knives are securely seated and adjusted to the same cutting position. Follow the machine manufacturer’s instructions for fastening, cutter-block adjustment, guarding, and safe testing before normal use.





























