Axminster AW168PT Planer Blades 410mm T1 HSS Pack of 2 Knives Made in the UK by Xcalibur Tooling
Wide-board preparation places extra demands on cutter knives, especially when an even finish is required across the full working width. These 410mm Xcalibur Tooling planer blades are manufactured for the Axminster AW168PT and supplied as a matched pair for coordinated cutter-block replacement.
Produced in the UK from high-tungsten T1 High Speed Steel, each blade is fully heat-treated, stress-relieved, and precision ground to approximately a 40° cutting bevel. Their resharpenable construction makes them suitable for workshops handling repeated hardwood and softwood preparation where consistent stock dimensioning and surface quality are important.
Key Features
-
410mm Machine-Specific Length: Each blade measures 410mm and is manufactured to suit the Axminster AW168PT planer/thicknesser for accurate cutter-block installation.
-
T1 High Speed Steel Construction: High-tungsten T1 HSS provides strong edge retention, toughness, and resistance to heat generated during repeated timber machining.
-
Matched Pack of Two: Both cutter knives can be replaced together, helping maintain equal cutting height and balanced material removal across wider boards.
-
Approximately 40° Cutting Bevel: Precision grinding to around 40° provides a practical balance between cutting sharpness, edge strength, and surface finish.
-
Resharpenable Design: The blades can be professionally sharpened again when dull, extending their useful working life when the correct blade geometry is maintained.
Applications
-
Prepare wide hardwood and softwood boards before furniture production, cabinet making, joinery, assembly, sanding, or finishing.
-
Dimension larger timber sections where consistent thickness and an even planed surface are required before subsequent machining.
-
Restore cutting quality when worn knives begin leaving ridges, rough areas, increased tear-out, or inconsistent material removal.
-
For workshops maintaining premium woodworking tools, keeping a correctly sized AW168PT replacement pair available helps reduce disruption when installed blades need sharpening or replacement.
-
Use the resharpenable knives through repeated timber-preparation cycles where dependable cutting geometry and surface consistency are important.
Why Choose Our Planer Blades?
-
The 410mm machine-specific sizing provides a dedicated replacement for the Axminster AW168PT rather than relying on a generic planer knife.
-
T1 HSS combines dependable edge retention with resharpenability, making the blades suitable for workshops carrying out frequent stock preparation.
-
Replacing both knives together helps maintain consistent cutter geometry and reduces the likelihood of uneven machining caused by blades with different wear levels.
-
Tight manufacturing tolerances support accurate cutter-block seating, helping minimise vibration and promote even material removal across wider workpieces.
-
Workshops already sourcing products such as axminster bandsaw blades can also use these Xcalibur Tooling planer knives as a machine-specific replacement for accurate timber preparation.
FAQs
1. Why are the AW168PT blades supplied as a pair?
The cutter block uses two knives, so replacing them together helps maintain equal cutting height and balanced material removal. A matched pair also supports a more consistent surface across wider boards.
2. Can these 410mm planer knives be resharpened?
Yes. The T1 HSS blades are designed to be resharpened multiple times when sufficient blade material remains. The original approximately 40° cutting geometry should be maintained.
3. Are these blades suitable for hardwood and softwood?
Yes. T1 HSS provides the toughness and edge retention needed for regular processing of hardwood and softwood. Feed rate and cutting depth should still suit the timber being machined.
4. What signs indicate that the planer knives are becoming dull?
Visible ridges, increased tear-out, rougher surfaces, or greater feed resistance can indicate declining edge sharpness. Blade condition and cutter-block setup should both be inspected.
5. What should I check after fitting the new blades?
Ensure both knives are securely seated and adjusted to the same cutting position. Follow the machine manufacturer’s instructions for fastening, cutter-block adjustment, guarding, and safe testing before normal use.





























