Skip to content
Fancy free products and better deals? Join The Inner Circle today.
Join thousands of woodworkers getting exclusive deals, free trials & latest updates.
Scheppach 4134 Planer Blades 260mm T1 HSS Pack of 2 Knives Made in the UK by Xcalibur Tooling

Scheppach 4134 Planer Blades 260mm T1 HSS Pack of 2 Knives Made in the UK by Xcalibur Tooling

by Xcalibur Tooling
£25.99 - £25.99
£25.99
£25.99 - £25.99
£25.99

Price Promise

Prices shown include VAT - clear, transparent pricing with no hidden charges.

Scheppach 4134 Planer Blades – Precision-Engineered for Exact Fit and Edge Retention

Manufactured in the UK by Xcalibur Tooling, these premium planer blades are engineered specifically for the Scheppach 4134 planer/thicknesser. Produced for demanding joinery workshops and serious woodworkers, each blade is made from T1 High Speed Steel (HSS) and precision-ground to deliver an accurate, smooth finish on both hardwoods and softwoods. Trusted by professionals across the UK, these knives are the direct replacement for the original 4134 blades, guaranteeing correct fit and reliable performance.

The blades are manufactured from T1 HSS, a high-tungsten steel grade selected for its superior edge retention and resistance to heat build-up. This material outperforms standard HSS and high carbon steel in both durability and cutting life, particularly when planing dense British hardwoods such as beech, ash, and oak. Each blade is heat-treated to achieve a hardness of 63 HRC, then stress-relieved to prevent warping during use. The cutting edge is ground to an industry-standard 40° bevel, which is widely recognised as the optimal geometry for balancing sharpness and edge strength across a range of timber species. The single-edged design allows for multiple resharpenings using a standard jig and diamond stone, offering long-term value for workshops with sharpening capability.

Dimensional consistency is critical for vibration-free planing and even thicknessing. Every blade is precision-ground to 260mm length, 18mm width, and 3mm thickness, with manufacturing tolerances held within ±0.05mm. This ensures accurate seating in the Scheppach 4134 cutter block and uniform cutting height across the pair, reducing the risk of chatter or uneven planing. The surface finish on each blade is controlled to Ra 3.2 or better, supporting a clean, tear-free cut even on interlocked or knotty grain. The result is a planed surface ready for finishing with minimal sanding required.

Technical Specifications

  • Machine Compatibility: Scheppach 4134(direct fit for original cutter block)
  • Blade Length: 260 mm
  • Blade Width: 18 mm
  • Blade Thickness: 3 mm
  • Material: T1 High Speed Steel (HSS, high-tungsten grade)
  • Cutting Edge Angle: 40° bevel
  • Edge Type: Single-edged, resharpenable
  • Pack Size: 2 blades (1 pair)
  • Manufacturing Origin: Made in the UK by Xcalibur Tooling

Applications

  • Joinery and cabinet making
  • Planing hardwoods (oak, beech, ash, maple)
  • Planing softwoods (pine, spruce, cedar)
  • Furniture panel preparation
  • Workshop thicknessing and finishing
  • General woodworking and timber surfacing

Why Choose Xcalibur Tooling

  • T1 HSS for superior edge retention and heat resistance
  • Resharpenable design for extended life and professional workshop value
  • Precision-ground to tight tolerances for vibration-free operation
  • Over 45 years of UK manufacturing expertise
  • Quality Guaranteed and trusted by professionals across the UK

Shipping & Returns

All orders dispatched from Bramhall, Cheshire within 1-2 working days. Free standard delivery on all UK orders. Returns accepted within 30 days. Item must be unused and in original packaging.

Payment

Payment accepted via PayPal, credit card, debit card through secure checkout. All prices include VAT where applicable.

FAQs

Q: Are these planer blades a direct replacement for the Scheppach 4134? A: Yes, these blades are manufactured to the exact nominal dimensions required for the Scheppach 4134 planer/thicknesser. Each blade measures 260mm in length, 18mm in width, and 3mm in thickness, matching the original specification. Precision-ground and tested on the 4134 cutter block, they guarantee correct seating and uniform cutting height for reliable, vibration-free operation.
Q: What is the cutting angle of these blades and why is it important? A: The blades are ground to a 40° bevel, which is the industry standard for planer knives. This angle provides an optimal balance between sharpness and edge durability, delivering a clean, tear-free surface on both hardwoods and softwoods. Maintaining this geometry is essential for efficient chip removal and minimising edge wear during extended use.
Q: What are the advantages of T1 High Speed Steel compared to standard HSS or TCT? A: T1 HSS contains a higher tungsten content than standard HSS, resulting in superior edge retention and heat resistance. This means the blades stay sharper for longer, especially when planing dense timbers like beech and oak. Compared to TCT (Tungsten Carbide Tipped), HSS blades can be resharpened multiple times, offering better long-term value for workshops with sharpening facilities, though TCT will last longer between changes on highly abrasive woods.
Q: Can these blades be resharpened, and how many times is typical? A: Yes, these blades are designed for resharpening. With correct use and sharpening technique, each blade can typically be resharpened 8 to 10 times before reaching minimum safe width. Use a sharpening jig and maintain the 25° to 40° bevel for best results. This resharpenable design significantly reduces ongoing tooling costs for busy workshops.
Q: Are these blades suitable for planing hardwoods such as beech and oak? A: These T1 HSS blades are specifically engineered for planing both hardwoods and softwoods. The high-tungsten HSS composition and heat-treated structure allow them to maintain a keen edge on dense British hardwoods like beech, oak, and ash. Users can expect a smooth, consistent finish and extended edge life, especially when compared to standard HCS or budget HSS blades.
Q: How do I install these blades in my Scheppach 4134? A: To install these blades, first ensure the machine is disconnected from power. Remove the cutter block guard and loosen the blade clamping screws. Carefully remove the old blades and insert the new Xcalibur Tooling blades, ensuring the cutting edge is aligned with the cutter block reference line. Tighten the screws evenly and check for uniform blade height using a setting jig or dial indicator. Refit the guard and test the machine with a trial cut.
Q: What maintenance is required to maximise blade life? A: Regularly clean resin and pitch from the blades using a suitable solvent. Inspect the cutting edge for nicks or dullness after each use. Sharpen the blades before they become excessively dull to maintain surface quality and reduce strain on the machine. Store spare blades in a dry, protected case to prevent corrosion and accidental damage.
Q: Are these blades compatible with any other machines? A: These blades are specifically manufactured for the Scheppach 4134 and are not recommended for use in other machines. Using blades in an incompatible cutter block can result in poor fit, vibration, or unsafe operation. Always check your machine's manual and blade specifications before purchasing replacements.
SKU 260183-2