Jet JWBS-15 Bandsaw Blade 1/4 X 14 TPI
Bandsaw blade for Jet JWBS-15 bandsaw machines 1/4" x 14 TPI BS33451414High Quality Bandsaw Blade ; Blade Length : 3345mm Blade Width : 1/4" Teeth per Inch : 14 Suitable for : Jet JWBS-15 bandsaw machines Suitable for use with; All types of wood including nail embedded wood. Non-ferrous metals. Plastic and Acrylic.
Bandsaw's being such a versatile tool has become an integral part of any woodworking. Any respectable wood shop has one. Whatever your saw, it is only as good as the blade you put in it, so always use the best - and at the correct cutting speed too of course! A bandsaw is a great addition to any workshop, so much so that it should be your first choice when it comes to cutting timber as it's safe, easy to set up and use, and is extremely versatile.
Getting a balance between a good finish and a decent feed rate are the two objectives in determining how many TPI or teeth per inch you want. 6-8 range is a good 'general purpose' blade. 2 or 3 TPI for re-sawing and thicker materials. 4 to 6 TPI for coarse, fast wood cutting duties in typical 3/4" material a range of between 14 TPI for slower, smoother cutting. 18 - 32 TPI for thinner metals and plastics under 1/4"
This formulae gives you the closest possible blade length, Set the pulleys or wheels in working position; Measure the center to center distance of the drive wheels.(C) ;Measure the radius of the upper and lower drive wheels. (R1 & R2). Using this blade length can be calculated by below formulae.
Blade Length = (R1 X 3.146) + (R2 X 3.146) + (2 X C)"
|Application||Wood cutting/Metal Cutting|