{"title":"Planer Blades For Bernardo Machines","description":"\u003cp\u003e\u003cspan\u003eDiscover premium Planer Blades for \u003c\/span\u003e\u003cstrong\u003eBernardo Machine\u003c\/strong\u003e\u003cspan\u003e models at Woodford Tooling. Our Xcalibur Tooling blades are crafted in the UK for superior performance, durability, and precision. Compatible with all \u003c\/span\u003e\u003cstrong\u003eBernardo Machine \u003c\/strong\u003e\u003cspan\u003emodels, these high-quality replacement blades ensure smooth, accurate cuts. Shop now for reliable planer blades designed to enhance your woodworking efficiency.\u003c\/span\u003e\u003c\/p\u003e","products":[{"product_id":"bernardo-pt150-planer-blades-158mm-t1-hss-pack-of-2-knives-made-in-the-uk-by-xcalibur-tooling","title":"Bernardo PT150 Planer Blades 158mm T1 HSS Pack of 2 Knives Made in the UK by Xcalibur Tooling","description":"\u003cp dir=\"ltr\"\u003e\u003cspan\u003eManufactured in the UK by \u003c\/span\u003e\u003cstrong\u003eXcalibur Tooling\u003c\/strong\u003e\u003cspan\u003e, these premium planer blades are engineered specifically for the \u003cstrong\u003eBernardo PT150\u003c\/strong\u003e\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003eplaner\/thicknesser. Designed for accuracy, durability, and surface finish, they are trusted by professional workshops and serious woodworkers who demand consistent performance.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe \u003c\/span\u003e\u003cstrong\u003eresharpenable version\u003c\/strong\u003e\u003cspan\u003e is produced from \u003c\/span\u003e\u003cstrong\u003eT1 High Speed Steel (HSS)\u003c\/strong\u003e\u003cspan\u003e — a high-tungsten steel grade renowned for exceptional edge retention, toughness, and resistance to heat build-up during cutting. Each blade is fully heat-treated, stress-relieved, and \u003c\/span\u003e\u003cstrong\u003eprecision ground to a standard cutting angle of approximately 40°\u003c\/strong\u003e\u003cspan\u003e, which is widely accepted as the optimal bevel for planer knives, delivering a clean cut while maintaining edge strength across hardwoods and softwoods.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eWhere specified, \u003c\/span\u003e\u003cstrong\u003edisposable blades\u003c\/strong\u003e\u003cspan\u003e are manufactured from hardened industrial steel and ground to the same geometry, offering quick blade changes and reduced downtime where sharpening facilities are not required.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eAll blades are ground to tight dimensional tolerances to ensure correct seating in the cutter block, reduced vibration, and even material removal. The controlled manufacturing process ensures thickness consistency across each pack, helping achieve an accurate knife set and a superior planed finish straight off the machine.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003ePack sizes are clearly stated to suit different cutter block configurations, and every blade reflects Xcalibur Tooling’s commitment to precision, longevity, and UK manufacturing quality.\u003c\/span\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eTECHNICAL SPECIFICATION\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cstrong\u003eMachine Compatibility:\u003c\/strong\u003e\u003cspan\u003e Bernardo PT150\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cstrong\u003eBlade Length:\u003c\/strong\u003e\u003cspan\u003e 158 mm\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cstrong\u003eCutting Edge Angle:\u003c\/strong\u003e\u003cspan\u003e Approx. \u003c\/span\u003e\u003cspan\u003e40° bevel\u003c\/span\u003e\u003cspan\u003e (industry-standard planer knife geometry)\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cstrong\u003eMaterial (Resharpenable):\u003c\/strong\u003e\u003cspan\u003e T1 High Speed Steel (high-tungsten HSS)\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cstrong\u003eMaterial (Disposable):\u003c\/strong\u003e\u003cspan\u003e Disposable\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cstrong\u003ePack Size:\u003c\/strong\u003e\u003cspan\u003e Pack of 2\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cstrong\u003eManufacturing Origin:\u003c\/strong\u003e\u003cspan\u003e Made in the UK\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cstrong\u003eBrand:\u003c\/strong\u003e\u003cspan\u003e Xcalibur Tooling\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eFAQs\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eQ-1: Are these blades direct replacements for the Bernardo PT150?\u003c\/strong\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003eYes. These blades are manufactured to the correct nominal dimensions and geometry required for the \u003cstrong\u003eBernardo PT150\u003c\/strong\u003e planer\/thicknesser.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eQ-2: What cutting angle are the blades ground to?\u003c\/strong\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003eAll blades are precision ground to an industry-standard planer knife bevel of approximately \u003c\/span\u003e\u003cstrong\u003e40°\u003c\/strong\u003e\u003cspan\u003e, balancing sharpness, durability, and surface finish.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eQ-3: What is the advantage of T1 HSS blades?\u003c\/strong\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003eT1 HSS offers superior edge retention and can be resharpened multiple times, making it ideal for professional use and long-term value.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ-4: How do I choose between resharpenable and disposable blades?\u003c\/strong\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003eResharpenable blades suit workshops with sharpening capability and frequent use. Disposable blades are ideal where speed and minimal downtime are priorities.\u003c\/span\u003e\u003c\/p\u003e","brand":"Xcalibur Tooling","offers":[{"title":"Default Title","offer_id":52407994253578,"sku":"WM1014-2","price":39.49,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/4195\/4570\/files\/WM1014_9dfb20bc-57ea-4654-ba9a-197c577611f8.jpg?v=1768562033"},{"product_id":"bernardo-pt200ed-planer-blades-210mm-t1-hss-pack-of-2-knives-made-in-the-uk-by-xcalibur-tooling","title":"Bernardo PT200ED Planer Blades 210mm T1 HSS Pack of 2 Knives Made in the UK by Xcalibur Tooling","description":"\u003cp dir=\"ltr\"\u003e\u003cspan\u003eManufactured in the UK by \u003c\/span\u003e\u003cstrong\u003eXcalibur Tooling\u003c\/strong\u003e\u003cspan\u003e, these premium planer blades are engineered specifically for the \u003cstrong\u003eBernardo PT200ED\u003c\/strong\u003e\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003eplaner\/thicknesser. Designed for accuracy, durability, and surface finish, they are trusted by professional workshops and serious woodworkers who demand consistent performance.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe \u003c\/span\u003e\u003cstrong\u003eresharpenable version\u003c\/strong\u003e\u003cspan\u003e is produced from \u003c\/span\u003e\u003cstrong\u003eT1 High Speed Steel (HSS)\u003c\/strong\u003e\u003cspan\u003e — a high-tungsten steel grade renowned for exceptional edge retention, toughness, and resistance to heat build-up during cutting. Each blade is fully heat-treated, stress-relieved, and \u003c\/span\u003e\u003cstrong\u003eprecision ground to a standard cutting angle of approximately 40°\u003c\/strong\u003e\u003cspan\u003e, which is widely accepted as the optimal bevel for planer knives, delivering a clean cut while maintaining edge strength across hardwoods and softwoods.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eWhere specified, \u003c\/span\u003e\u003cstrong\u003edisposable blades\u003c\/strong\u003e\u003cspan\u003e are manufactured from hardened industrial steel and ground to the same geometry, offering quick blade changes and reduced downtime where sharpening facilities are not required.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eAll blades are ground to tight dimensional tolerances to ensure correct seating in the cutter block, reduced vibration, and even material removal. The controlled manufacturing process ensures thickness consistency across each pack, helping achieve an accurate knife set and a superior planed finish straight off the machine.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003ePack sizes are clearly stated to suit different cutter block configurations, and every blade reflects Xcalibur Tooling’s commitment to precision, longevity, and UK manufacturing quality.\u003c\/span\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eTECHNICAL SPECIFICATION\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cstrong\u003eMachine Compatibility:\u003c\/strong\u003e\u003cspan\u003e Bernardo PT200ED\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cstrong\u003eBlade Length:\u003c\/strong\u003e\u003cspan\u003e 210 mm\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cstrong\u003eCutting Edge Angle:\u003c\/strong\u003e\u003cspan\u003e Approx. \u003c\/span\u003e\u003cspan\u003e40° bevel\u003c\/span\u003e\u003cspan\u003e (industry-standard planer knife geometry)\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cstrong\u003eMaterial (Resharpenable):\u003c\/strong\u003e\u003cspan\u003e T1 High Speed Steel (high-tungsten HSS)\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cstrong\u003eMaterial (Disposable):\u003c\/strong\u003e\u003cspan\u003e Disposable\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cstrong\u003ePack Size:\u003c\/strong\u003e\u003cspan\u003e Pack of 2\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cstrong\u003eManufacturing Origin:\u003c\/strong\u003e\u003cspan\u003e Made in the UK\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cstrong\u003eBrand:\u003c\/strong\u003e\u003cspan\u003e Xcalibur Tooling\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eFAQs\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eQ-1: Are these blades direct replacements for the Bernardo \u003cspan\u003ePT200ED\u003c\/span\u003e?\u003c\/strong\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003eYes. These blades are manufactured to the correct nominal dimensions and geometry required for the \u003cstrong\u003eBernardo PT200ED\u003c\/strong\u003e planer\/thicknesser.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eQ-2: What cutting angle are the blades ground to?\u003c\/strong\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003eAll blades are precision ground to an industry-standard planer knife bevel of approximately \u003c\/span\u003e\u003cstrong\u003e40°\u003c\/strong\u003e\u003cspan\u003e, balancing sharpness, durability, and surface finish.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eQ-3: What is the advantage of T1 HSS blades?\u003c\/strong\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003eT1 HSS offers superior edge retention and can be resharpened multiple times, making it ideal for professional use and long-term value.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ-4: How do I choose between resharpenable and disposable blades?\u003c\/strong\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003eResharpenable blades suit workshops with sharpening capability and frequent use. Disposable blades are ideal where speed and minimal downtime are priorities.\u003c\/span\u003e\u003c\/p\u003e","brand":"Xcalibur Tooling","offers":[{"title":"Default Title","offer_id":52408017486090,"sku":"WM1012-2","price":39.49,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/4195\/4570\/files\/WM1012.png?v=1768545162"},{"product_id":"bernardo-pt250-planer-blades-258mm-t1-hss-pack-of-2-knives-made-in-the-uk-by-xcalibur-tooling","title":"Bernardo PT250 Planer Blades 258mm T1 HSS Pack of 2 Knives Made in the UK by Xcalibur Tooling","description":"\u003cp dir=\"ltr\"\u003e\u003cspan\u003eManufactured in the UK by \u003c\/span\u003e\u003cstrong\u003eXcalibur Tooling\u003c\/strong\u003e\u003cspan\u003e, these premium planer blades are engineered specifically for the \u003cstrong\u003eBernardo PT250\u003c\/strong\u003e\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003eplaner\/thicknesser. Designed for accuracy, durability, and surface finish, they are trusted by professional workshops and serious woodworkers who demand consistent performance.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe \u003c\/span\u003e\u003cstrong\u003eresharpenable version\u003c\/strong\u003e\u003cspan\u003e is produced from \u003c\/span\u003e\u003cstrong\u003eT1 High Speed Steel (HSS)\u003c\/strong\u003e\u003cspan\u003e — a high-tungsten steel grade renowned for exceptional edge retention, toughness, and resistance to heat build-up during cutting. Each blade is fully heat-treated, stress-relieved, and \u003c\/span\u003e\u003cstrong\u003eprecision ground to a standard cutting angle of approximately 40°\u003c\/strong\u003e\u003cspan\u003e, which is widely accepted as the optimal bevel for planer knives, delivering a clean cut while maintaining edge strength across hardwoods and softwoods.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eWhere specified, \u003c\/span\u003e\u003cstrong\u003edisposable blades\u003c\/strong\u003e\u003cspan\u003e are manufactured from hardened industrial steel and ground to the same geometry, offering quick blade changes and reduced downtime where sharpening facilities are not required.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eAll blades are ground to tight dimensional tolerances to ensure correct seating in the cutter block, reduced vibration, and even material removal. The controlled manufacturing process ensures thickness consistency across each pack, helping achieve an accurate knife set and a superior planed finish straight off the machine.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003ePack sizes are clearly stated to suit different cutter block configurations, and every blade reflects Xcalibur Tooling’s commitment to precision, longevity, and UK manufacturing quality.\u003c\/span\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eTECHNICAL SPECIFICATION\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cstrong\u003eMachine Compatibility:\u003c\/strong\u003e\u003cspan\u003e Bernardo PT250\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cstrong\u003eBlade Length:\u003c\/strong\u003e\u003cspan\u003e 258 mm\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cstrong\u003eCutting Edge Angle:\u003c\/strong\u003e\u003cspan\u003e Approx. \u003c\/span\u003e\u003cspan\u003e40° bevel\u003c\/span\u003e\u003cspan\u003e (industry-standard planer knife geometry)\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cstrong\u003eMaterial (Resharpenable):\u003c\/strong\u003e\u003cspan\u003e T1 High Speed Steel (high-tungsten HSS)\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cstrong\u003eMaterial (Disposable):\u003c\/strong\u003e\u003cspan\u003e Disposable\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cstrong\u003ePack Size:\u003c\/strong\u003e\u003cspan\u003e Pack of 2\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cstrong\u003eManufacturing Origin:\u003c\/strong\u003e\u003cspan\u003e Made in the UK\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cstrong\u003eBrand:\u003c\/strong\u003e\u003cspan\u003e Xcalibur Tooling\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eFAQs\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eQ-1: Are these blades direct replacements for the Bernardo \u003cspan\u003ePT250\u003c\/span\u003e?\u003c\/strong\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003eYes. These blades are manufactured to the correct nominal dimensions and geometry required for the \u003cstrong\u003eBernardo PT250\u003c\/strong\u003e planer\/thicknesser.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eQ-2: What cutting angle are the blades ground to?\u003c\/strong\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003eAll blades are precision ground to an industry-standard planer knife bevel of approximately \u003c\/span\u003e\u003cstrong\u003e40°\u003c\/strong\u003e\u003cspan\u003e, balancing sharpness, durability, and surface finish.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eQ-3: What is the advantage of T1 HSS blades?\u003c\/strong\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003eT1 HSS offers superior edge retention and can be resharpened multiple times, making it ideal for professional use and long-term value.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ-4: How do I choose between resharpenable and disposable blades?\u003c\/strong\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003eResharpenable blades suit workshops with sharpening capability and frequent use. Disposable blades are ideal where speed and minimal downtime are priorities.\u003c\/span\u003e\u003c\/p\u003e","brand":"Xcalibur Tooling","offers":[{"title":"Default Title","offer_id":52408039932170,"sku":"WM1011-2","price":39.49,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/4195\/4570\/files\/WM1011_e8bc4695-2cc8-4727-9540-33c1946ebb8c.jpg?v=1768545607"},{"product_id":"bernardo-ad-300-planer-blades-310mm-t1-hss-pack-of-2-knives-made-in-the-uk-by-xcalibur-tooling","title":"Bernardo AD 300 Planer Blades 310mm T1 HSS Pack of 2 Knives Made in the UK by Xcalibur Tooling","description":"\u003cp dir=\"ltr\"\u003e\u003cspan\u003eManufactured in the UK by \u003c\/span\u003e\u003cstrong\u003eXcalibur Tooling\u003c\/strong\u003e\u003cspan\u003e, these premium planer blades are engineered specifically for the \u003cstrong\u003eBernardo AD 300\u003c\/strong\u003e\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003eplaner\/thicknesser. Designed for accuracy, durability, and surface finish, they are trusted by professional workshops and serious woodworkers who demand consistent performance.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe \u003c\/span\u003e\u003cstrong\u003eresharpenable version\u003c\/strong\u003e\u003cspan\u003e is produced from \u003c\/span\u003e\u003cstrong\u003eT1 High Speed Steel (HSS)\u003c\/strong\u003e\u003cspan\u003e — a high-tungsten steel grade renowned for exceptional edge retention, toughness, and resistance to heat build-up during cutting. Each blade is fully heat-treated, stress-relieved, and \u003c\/span\u003e\u003cstrong\u003eprecision ground to a standard cutting angle of approximately 40°\u003c\/strong\u003e\u003cspan\u003e, which is widely accepted as the optimal bevel for planer knives, delivering a clean cut while maintaining edge strength across hardwoods and softwoods.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eWhere specified, \u003c\/span\u003e\u003cstrong\u003edisposable blades\u003c\/strong\u003e\u003cspan\u003e are manufactured from hardened industrial steel and ground to the same geometry, offering quick blade changes and reduced downtime where sharpening facilities are not required.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eAll blades are ground to tight dimensional tolerances to ensure correct seating in the cutter block, reduced vibration, and even material removal. The controlled manufacturing process ensures thickness consistency across each pack, helping achieve an accurate knife set and a superior planed finish straight off the machine.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003ePack sizes are clearly stated to suit different cutter block configurations, and every blade reflects Xcalibur Tooling’s commitment to precision, longevity, and UK manufacturing quality.\u003c\/span\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eTECHNICAL SPECIFICATION\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cstrong\u003eMachine Compatibility:\u003c\/strong\u003e\u003cspan\u003e Bernardo AD 300\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cstrong\u003eBlade Length:\u003c\/strong\u003e\u003cspan\u003e 310 mm\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cstrong\u003eCutting Edge Angle:\u003c\/strong\u003e\u003cspan\u003e Approx. \u003c\/span\u003e\u003cspan\u003e40° bevel\u003c\/span\u003e\u003cspan\u003e (industry-standard planer knife geometry)\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cstrong\u003eMaterial (Resharpenable):\u003c\/strong\u003e\u003cspan\u003e T1 High Speed Steel (high-tungsten HSS)\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cstrong\u003eMaterial (Disposable):\u003c\/strong\u003e\u003cspan\u003e Resharpenable\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cstrong\u003ePack Size:\u003c\/strong\u003e\u003cspan\u003e Pack of 2\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cstrong\u003eManufacturing Origin:\u003c\/strong\u003e\u003cspan\u003e Made in the UK\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cstrong\u003eBrand:\u003c\/strong\u003e\u003cspan\u003e Xcalibur Tooling\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eFAQs\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eQ-1: Are these blades direct replacements for the Bernardo AD 300?\u003c\/strong\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003eYes. These blades are manufactured to the correct nominal dimensions and geometry required for the \u003cstrong\u003eBernardo AD 300\u003c\/strong\u003e planer\/thicknesser.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eQ-2: What cutting angle are the blades ground to?\u003c\/strong\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003eAll blades are precision ground to an industry-standard planer knife bevel of approximately \u003c\/span\u003e\u003cstrong\u003e40°\u003c\/strong\u003e\u003cspan\u003e, balancing sharpness, durability, and surface finish.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eQ-3: What is the advantage of T1 HSS blades?\u003c\/strong\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003eT1 HSS offers superior edge retention and can be resharpened multiple times, making it ideal for professional use and long-term value.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ-4: How do I choose between resharpenable and disposable blades?\u003c\/strong\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003eResharpenable blades suit workshops with sharpening capability and frequent use. Disposable blades are ideal where speed and minimal downtime are priorities.\u003c\/span\u003e\u003c\/p\u003e","brand":"Xcalibur Tooling","offers":[{"title":"Default Title","offer_id":52408068735242,"sku":"310303-2","price":28.49,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/4195\/4570\/files\/01-Main_db6d1633-7647-40fd-9b30-64c1c276406c.jpg?v=1772792392"},{"product_id":"bernardo-15-1005-planer-blades-310mm-t1-hss-pack-of-2-knives-made-in-the-uk-by-xcalibur-tooling","title":"Bernardo 15-1005 Planer Blades 310mm T1 HSS Pack of 2 Knives Made in the UK by Xcalibur Tooling","description":"\u003cp dir=\"ltr\"\u003e\u003cspan\u003eManufactured in the UK by \u003c\/span\u003e\u003cstrong\u003eXcalibur Tooling\u003c\/strong\u003e\u003cspan\u003e, these premium planer blades are engineered specifically for the \u003cstrong\u003eBernardo 15-1005\u003c\/strong\u003e\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003eplaner\/thicknesser. Designed for accuracy, durability, and surface finish, they are trusted by professional workshops and serious woodworkers who demand consistent performance.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe \u003c\/span\u003e\u003cstrong\u003eresharpenable version\u003c\/strong\u003e\u003cspan\u003e is produced from \u003c\/span\u003e\u003cstrong\u003eT1 High Speed Steel (HSS)\u003c\/strong\u003e\u003cspan\u003e — a high-tungsten steel grade renowned for exceptional edge retention, toughness, and resistance to heat build-up during cutting. Each blade is fully heat-treated, stress-relieved, and \u003c\/span\u003e\u003cstrong\u003eprecision ground to a standard cutting angle of approximately 40°\u003c\/strong\u003e\u003cspan\u003e, which is widely accepted as the optimal bevel for planer knives, delivering a clean cut while maintaining edge strength across hardwoods and softwoods.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eWhere specified, \u003c\/span\u003e\u003cstrong\u003edisposable blades\u003c\/strong\u003e\u003cspan\u003e are manufactured from hardened industrial steel and ground to the same geometry, offering quick blade changes and reduced downtime where sharpening facilities are not required.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eAll blades are ground to tight dimensional tolerances to ensure correct seating in the cutter block, reduced vibration, and even material removal. The controlled manufacturing process ensures thickness consistency across each pack, helping achieve an accurate knife set and a superior planed finish straight off the machine.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003ePack sizes are clearly stated to suit different cutter block configurations, and every blade reflects Xcalibur Tooling’s commitment to precision, longevity, and UK manufacturing quality.\u003c\/span\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eTECHNICAL SPECIFICATION\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cstrong\u003eMachine Compatibility:\u003c\/strong\u003e\u003cspan\u003e Bernardo 15-1005\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cstrong\u003eBlade Length:\u003c\/strong\u003e\u003cspan\u003e 310 mm\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cstrong\u003eCutting Edge Angle:\u003c\/strong\u003e\u003cspan\u003e Approx. \u003c\/span\u003e\u003cspan\u003e40° bevel\u003c\/span\u003e\u003cspan\u003e (industry-standard planer knife geometry)\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cstrong\u003eMaterial (Resharpenable):\u003c\/strong\u003e\u003cspan\u003e T1 High Speed Steel (high-tungsten HSS)\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cstrong\u003eMaterial (Disposable):\u003c\/strong\u003e\u003cspan\u003e Resharpenable\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cstrong\u003ePack Size:\u003c\/strong\u003e\u003cspan\u003e Pack of 2\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cstrong\u003eManufacturing Origin:\u003c\/strong\u003e\u003cspan\u003e Made in the UK\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cstrong\u003eBrand:\u003c\/strong\u003e\u003cspan\u003e Xcalibur Tooling\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eFAQs\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eQ-1: Are these blades direct replacements for the Bernardo 15-1005?\u003c\/strong\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003eYes. These blades are manufactured to the correct nominal dimensions and geometry required for the \u003cstrong\u003eBernardo 15-1005\u003c\/strong\u003e planer\/thicknesser.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eQ-2: What cutting angle are the blades ground to?\u003c\/strong\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003eAll blades are precision ground to an industry-standard planer knife bevel of approximately \u003c\/span\u003e\u003cstrong\u003e40°\u003c\/strong\u003e\u003cspan\u003e, balancing sharpness, durability, and surface finish.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eQ-3: What is the advantage of T1 HSS blades?\u003c\/strong\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003eT1 HSS offers superior edge retention and can be resharpened multiple times, making it ideal for professional use and long-term value.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ-4: How do I choose between resharpenable and disposable blades?\u003c\/strong\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003eResharpenable blades suit workshops with sharpening capability and frequent use. Disposable blades are ideal where speed and minimal downtime are priorities.\u003c\/span\u003e\u003c\/p\u003e","brand":"Xcalibur Tooling","offers":[{"title":"Default Title","offer_id":52408137744650,"sku":"310303-2","price":28.49,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/4195\/4570\/files\/01-Main_db6d1633-7647-40fd-9b30-64c1c276406c.jpg?v=1772792392"},{"product_id":"bernardo-adm-300-planer-blades-305mm-t1-hss-pack-of-2-knives-made-in-the-uk-by-xcalibur-tooling","title":"Bernardo ADM 300 Planer Blades 305mm T1 HSS Pack of 2 Knives Made in the UK by Xcalibur Tooling","description":"\u003cp dir=\"ltr\"\u003e\u003cspan\u003eManufactured in the UK by \u003c\/span\u003e\u003cstrong\u003eXcalibur Tooling\u003c\/strong\u003e\u003cspan\u003e, these premium planer blades are engineered specifically for the \u003cstrong\u003eBernardo ADM 300\u003c\/strong\u003e\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003eplaner\/thicknesser. Designed for accuracy, durability, and surface finish, they are trusted by professional workshops and serious woodworkers who demand consistent performance.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe \u003c\/span\u003e\u003cstrong\u003eresharpenable version\u003c\/strong\u003e\u003cspan\u003e is produced from \u003c\/span\u003e\u003cstrong\u003eT1 High Speed Steel (HSS)\u003c\/strong\u003e\u003cspan\u003e — a high-tungsten steel grade renowned for exceptional edge retention, toughness, and resistance to heat build-up during cutting. Each blade is fully heat-treated, stress-relieved, and \u003c\/span\u003e\u003cstrong\u003eprecision ground to a standard cutting angle of approximately 40°\u003c\/strong\u003e\u003cspan\u003e, which is widely accepted as the optimal bevel for planer knives, delivering a clean cut while maintaining edge strength across hardwoods and softwoods.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eWhere specified, \u003c\/span\u003e\u003cstrong\u003edisposable blades\u003c\/strong\u003e\u003cspan\u003e are manufactured from hardened industrial steel and ground to the same geometry, offering quick blade changes and reduced downtime where sharpening facilities are not required.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eAll blades are ground to tight dimensional tolerances to ensure correct seating in the cutter block, reduced vibration, and even material removal. The controlled manufacturing process ensures thickness consistency across each pack, helping achieve an accurate knife set and a superior planed finish straight off the machine.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003ePack sizes are clearly stated to suit different cutter block configurations, and every blade reflects Xcalibur Tooling’s commitment to precision, longevity, and UK manufacturing quality.\u003c\/span\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eTECHNICAL SPECIFICATION\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cstrong\u003eMachine Compatibility:\u003c\/strong\u003e\u003cspan\u003e Bernardo ADM 300\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cstrong\u003eBlade Length:\u003c\/strong\u003e\u003cspan\u003e 305 mm\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cstrong\u003eCutting Edge Angle:\u003c\/strong\u003e\u003cspan\u003e Approx. \u003c\/span\u003e\u003cspan\u003e40° bevel\u003c\/span\u003e\u003cspan\u003e (industry-standard planer knife geometry)\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cstrong\u003eMaterial (Resharpenable):\u003c\/strong\u003e\u003cspan\u003e T1 High Speed Steel (high-tungsten HSS)\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cstrong\u003eMaterial (Disposable):\u003c\/strong\u003e\u003cspan\u003e Resharpenable\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cstrong\u003ePack Size:\u003c\/strong\u003e\u003cspan\u003e Pack of 2\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cstrong\u003eManufacturing Origin:\u003c\/strong\u003e\u003cspan\u003e Made in the UK\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cstrong\u003eBrand:\u003c\/strong\u003e\u003cspan\u003e Xcalibur Tooling\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eFAQs\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eQ-1: Are these blades direct replacements for the Bernardo ADM 300?\u003c\/strong\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003eYes. These blades are manufactured to the correct nominal dimensions and geometry required for the \u003cstrong\u003eBernardo ADM 300\u003c\/strong\u003e planer\/thicknesser.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eQ-2: What cutting angle are the blades ground to?\u003c\/strong\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003eAll blades are precision ground to an industry-standard planer knife bevel of approximately \u003c\/span\u003e\u003cstrong\u003e40°\u003c\/strong\u003e\u003cspan\u003e, balancing sharpness, durability, and surface finish.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eQ-3: What is the advantage of T1 HSS blades?\u003c\/strong\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003eT1 HSS offers superior edge retention and can be resharpened multiple times, making it ideal for professional use and long-term value.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ-4: How do I choose between resharpenable and disposable blades?\u003c\/strong\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003eResharpenable blades suit workshops with sharpening capability and frequent use. Disposable blades are ideal where speed and minimal downtime are priorities.\u003c\/span\u003e\u003c\/p\u003e","brand":"Xcalibur Tooling","offers":[{"title":"Default Title","offer_id":52408181653770,"sku":"305253-2","price":28.49,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/4195\/4570\/files\/01-Main_db6d1633-7647-40fd-9b30-64c1c276406c.jpg?v=1772792392"},{"product_id":"bernardo-universal-kombi-cwm-260-f-planer-blades-250mm-t1-hss-pack-of-3-knives-made-in-the-uk-by-xcalibur-tooling","title":"Bernardo Universal Kombi CWM 260 F Planer Blades 250mm T1 HSS Pack of 3 Knives Made in the UK by Xcalibur Tooling","description":"\u003cp dir=\"ltr\"\u003e\u003cspan\u003eManufactured in the UK by \u003c\/span\u003e\u003cstrong\u003eXcalibur Tooling\u003c\/strong\u003e\u003cspan\u003e, these premium planer blades are engineered specifically for the \u003cstrong\u003eBernardo Universal Kombi CWM 260 F\u003c\/strong\u003e\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003eplaner\/thicknesser. Designed for accuracy, durability, and surface finish, they are trusted by professional workshops and serious woodworkers who demand consistent performance.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe \u003c\/span\u003e\u003cstrong\u003eresharpenable version\u003c\/strong\u003e\u003cspan\u003e is produced from \u003c\/span\u003e\u003cstrong\u003eT1 High Speed Steel (HSS)\u003c\/strong\u003e\u003cspan\u003e — a high-tungsten steel grade renowned for exceptional edge retention, toughness, and resistance to heat build-up during cutting. Each blade is fully heat-treated, stress-relieved, and \u003c\/span\u003e\u003cstrong\u003eprecision ground to a standard cutting angle of approximately 40°\u003c\/strong\u003e\u003cspan\u003e, which is widely accepted as the optimal bevel for planer knives, delivering a clean cut while maintaining edge strength across hardwoods and softwoods.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eWhere specified, \u003c\/span\u003e\u003cstrong\u003edisposable blades\u003c\/strong\u003e\u003cspan\u003e are manufactured from hardened industrial steel and ground to the same geometry, offering quick blade changes and reduced downtime where sharpening facilities are not required.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eAll blades are ground to tight dimensional tolerances to ensure correct seating in the cutter block, reduced vibration, and even material removal. The controlled manufacturing process ensures thickness consistency across each pack, helping achieve an accurate knife set and a superior planed finish straight off the machine.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003ePack sizes are clearly stated to suit different cutter block configurations, and every blade reflects Xcalibur Tooling’s commitment to precision, longevity, and UK manufacturing quality.\u003c\/span\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eTECHNICAL SPECIFICATION\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cstrong\u003eMachine Compatibility:\u003c\/strong\u003e\u003cspan\u003e Bernardo Universal Kombi CWM 260 F\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cstrong\u003eBlade Length:\u003c\/strong\u003e\u003cspan\u003e 250 mm\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cstrong\u003eCutting Edge Angle:\u003c\/strong\u003e\u003cspan\u003e Approx. \u003c\/span\u003e\u003cspan\u003e40° bevel\u003c\/span\u003e\u003cspan\u003e (industry-standard planer knife geometry)\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cstrong\u003eMaterial (Resharpenable):\u003c\/strong\u003e\u003cspan\u003e T1 High Speed Steel (high-tungsten HSS)\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cstrong\u003eMaterial (Disposable):\u003c\/strong\u003e\u003cspan\u003e Resharpenable\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cstrong\u003ePack Size:\u003c\/strong\u003e\u003cspan\u003e Pack of 3\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cstrong\u003eManufacturing Origin:\u003c\/strong\u003e\u003cspan\u003e Made in the UK\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cstrong\u003eBrand:\u003c\/strong\u003e\u003cspan\u003e Xcalibur Tooling\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eFAQs\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eQ-1: Are these blades direct replacements for the Bernardo Universal Kombi CWM 260 F?\u003c\/strong\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003eYes. These blades are manufactured to the correct nominal dimensions and geometry required for the \u003cstrong\u003eBernardo Universal Kombi CWM 260 F\u003c\/strong\u003e planer\/thicknesser.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eQ-2: What cutting angle are the blades ground to?\u003c\/strong\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003eAll blades are precision ground to an industry-standard planer knife bevel of approximately \u003c\/span\u003e\u003cstrong\u003e40°\u003c\/strong\u003e\u003cspan\u003e, balancing sharpness, durability, and surface finish.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eQ-3: What is the advantage of T1 HSS blades?\u003c\/strong\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003eT1 HSS offers superior edge retention and can be resharpened multiple times, making it ideal for professional use and long-term value.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ-4: How do I choose between resharpenable and disposable blades?\u003c\/strong\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003eResharpenable blades suit workshops with sharpening capability and frequent use. Disposable blades are ideal where speed and minimal downtime are priorities.\u003c\/span\u003e\u003c\/p\u003e","brand":"Xcalibur Tooling","offers":[{"title":"Default Title","offer_id":52408307319050,"sku":"250253-3","price":34.49,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/4195\/4570\/files\/01-Main_41e7d64d-833a-4446-bef0-0ab602bb2681.jpg?v=1776422995"},{"product_id":"bernardo-pt-310-planer-blades-310mm-t1-hss-pack-of-2-knives-made-in-the-uk-by-xcalibur-tooling","title":"Bernardo PT 310 Planer Blades 310mm T1 HSS Pack of 2 Knives Made in the UK by Xcalibur Tooling","description":"\u003cp dir=\"ltr\"\u003e\u003cspan\u003eManufactured in the UK by \u003c\/span\u003e\u003cstrong\u003eXcalibur Tooling\u003c\/strong\u003e\u003cspan\u003e, these premium planer blades are engineered specifically for the \u003cstrong\u003eBernardo PT 310\u003c\/strong\u003e\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003eplaner\/thicknesser. Designed for accuracy, durability, and surface finish, they are trusted by professional workshops and serious woodworkers who demand consistent performance.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe \u003c\/span\u003e\u003cstrong\u003eresharpenable version\u003c\/strong\u003e\u003cspan\u003e is produced from \u003c\/span\u003e\u003cstrong\u003eT1 High Speed Steel (HSS)\u003c\/strong\u003e\u003cspan\u003e — a high-tungsten steel grade renowned for exceptional edge retention, toughness, and resistance to heat build-up during cutting. Each blade is fully heat-treated, stress-relieved, and \u003c\/span\u003e\u003cstrong\u003eprecision ground to a standard cutting angle of approximately 40°\u003c\/strong\u003e\u003cspan\u003e, which is widely accepted as the optimal bevel for planer knives, delivering a clean cut while maintaining edge strength across hardwoods and softwoods.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eWhere specified, \u003c\/span\u003e\u003cstrong\u003edisposable blades\u003c\/strong\u003e\u003cspan\u003e are manufactured from hardened industrial steel and ground to the same geometry, offering quick blade changes and reduced downtime where sharpening facilities are not required.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eAll blades are ground to tight dimensional tolerances to ensure correct seating in the cutter block, reduced vibration, and even material removal. The controlled manufacturing process ensures thickness consistency across each pack, helping achieve an accurate knife set and a superior planed finish straight off the machine.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003ePack sizes are clearly stated to suit different cutter block configurations, and every blade reflects Xcalibur Tooling’s commitment to precision, longevity, and UK manufacturing quality.\u003c\/span\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eTECHNICAL SPECIFICATION\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cstrong\u003eMachine Compatibility:\u003c\/strong\u003e\u003cspan\u003e Bernardo PT 310\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cstrong\u003eBlade Length:\u003c\/strong\u003e\u003cspan\u003e 310 mm\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cstrong\u003eCutting Edge Angle:\u003c\/strong\u003e\u003cspan\u003e Approx. \u003c\/span\u003e\u003cspan\u003e40° bevel\u003c\/span\u003e\u003cspan\u003e (industry-standard planer knife geometry)\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cstrong\u003eMaterial (Resharpenable):\u003c\/strong\u003e\u003cspan\u003e T1 High Speed Steel (high-tungsten HSS)\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cstrong\u003eMaterial (Disposable):\u003c\/strong\u003e\u003cspan\u003e Resharpenable\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cstrong\u003ePack Size:\u003c\/strong\u003e\u003cspan\u003e Pack of 2\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cstrong\u003eManufacturing Origin:\u003c\/strong\u003e\u003cspan\u003e Made in the UK\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cstrong\u003eBrand:\u003c\/strong\u003e\u003cspan\u003e Xcalibur Tooling\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eFAQs\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eQ-1: Are these blades direct replacements for the Bernardo \u003cspan\u003ePT 310\u003c\/span\u003e?\u003c\/strong\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003eYes. These blades are manufactured to the correct nominal dimensions and geometry required for the \u003cstrong\u003eBernardo PT 310\u003c\/strong\u003e planer\/thicknesser.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eQ-2: What cutting angle are the blades ground to?\u003c\/strong\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003eAll blades are precision ground to an industry-standard planer knife bevel of approximately \u003c\/span\u003e\u003cstrong\u003e40°\u003c\/strong\u003e\u003cspan\u003e, balancing sharpness, durability, and surface finish.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eQ-3: What is the advantage of T1 HSS blades?\u003c\/strong\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003eT1 HSS offers superior edge retention and can be resharpened multiple times, making it ideal for professional use and long-term value.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ-4: How do I choose between resharpenable and disposable blades?\u003c\/strong\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003eResharpenable blades suit workshops with sharpening capability and frequent use. Disposable blades are ideal where speed and minimal downtime are priorities.\u003c\/span\u003e\u003c\/p\u003e","brand":"Xcalibur Tooling","offers":[{"title":"Default Title","offer_id":52408345592074,"sku":"310303-2","price":28.49,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/4195\/4570\/files\/01-Main_db6d1633-7647-40fd-9b30-64c1c276406c.jpg?v=1772792392"},{"product_id":"bernardo-adm-260-planer-blades-250mm-t1-hss-pack-of-3-knives-made-in-the-uk-by-xcalibur-tooling","title":"Bernardo ADM 260 Planer Blades 250mm T1 HSS Pack of 3 Knives Made in the UK by Xcalibur Tooling","description":"\u003cp dir=\"ltr\"\u003e\u003cspan\u003eManufactured in the UK by \u003c\/span\u003e\u003cstrong\u003eXcalibur Tooling\u003c\/strong\u003e\u003cspan\u003e, these premium planer blades are engineered specifically for the \u003cstrong\u003eBernardo ADM 260\u003c\/strong\u003e\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003eplaner\/thicknesser. Designed for accuracy, durability, and surface finish, they are trusted by professional workshops and serious woodworkers who demand consistent performance.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe \u003c\/span\u003e\u003cstrong\u003eresharpenable version\u003c\/strong\u003e\u003cspan\u003e is produced from \u003c\/span\u003e\u003cstrong\u003eT1 High Speed Steel (HSS)\u003c\/strong\u003e\u003cspan\u003e — a high-tungsten steel grade renowned for exceptional edge retention, toughness, and resistance to heat build-up during cutting. Each blade is fully heat-treated, stress-relieved, and \u003c\/span\u003e\u003cstrong\u003eprecision ground to a standard cutting angle of approximately 40°\u003c\/strong\u003e\u003cspan\u003e, which is widely accepted as the optimal bevel for planer knives, delivering a clean cut while maintaining edge strength across hardwoods and softwoods.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eWhere specified, \u003c\/span\u003e\u003cstrong\u003edisposable blades\u003c\/strong\u003e\u003cspan\u003e are manufactured from hardened industrial steel and ground to the same geometry, offering quick blade changes and reduced downtime where sharpening facilities are not required.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eAll blades are ground to tight dimensional tolerances to ensure correct seating in the cutter block, reduced vibration, and even material removal. The controlled manufacturing process ensures thickness consistency across each pack, helping achieve an accurate knife set and a superior planed finish straight off the machine.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003ePack sizes are clearly stated to suit different cutter block configurations, and every blade reflects Xcalibur Tooling’s commitment to precision, longevity, and UK manufacturing quality.\u003c\/span\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eTECHNICAL SPECIFICATION\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cstrong\u003eMachine Compatibility:\u003c\/strong\u003e\u003cspan\u003e Bernardo ADM 260\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cstrong\u003eBlade Length:\u003c\/strong\u003e\u003cspan\u003e 250 mm\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cstrong\u003eCutting Edge Angle:\u003c\/strong\u003e\u003cspan\u003e Approx. \u003c\/span\u003e\u003cspan\u003e40° bevel\u003c\/span\u003e\u003cspan\u003e (industry-standard planer knife geometry)\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cstrong\u003eMaterial (Resharpenable):\u003c\/strong\u003e\u003cspan\u003e T1 High Speed Steel (high-tungsten HSS)\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cstrong\u003eMaterial (Disposable):\u003c\/strong\u003e\u003cspan\u003e Resharpenable\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cstrong\u003ePack Size:\u003c\/strong\u003e\u003cspan\u003e Pack of 3\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cstrong\u003eManufacturing Origin:\u003c\/strong\u003e\u003cspan\u003e Made in the UK\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cstrong\u003eBrand:\u003c\/strong\u003e\u003cspan\u003e Xcalibur Tooling\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eFAQs\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eQ-1: Are these blades direct replacements for the Bernardo ADM 260?\u003c\/strong\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003eYes. These blades are manufactured to the correct nominal dimensions and geometry required for the \u003cstrong\u003eBernardo ADM 260\u003c\/strong\u003e planer\/thicknesser.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eQ-2: What cutting angle are the blades ground to?\u003c\/strong\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003eAll blades are precision ground to an industry-standard planer knife bevel of approximately \u003c\/span\u003e\u003cstrong\u003e40°\u003c\/strong\u003e\u003cspan\u003e, balancing sharpness, durability, and surface finish.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eQ-3: What is the advantage of T1 HSS blades?\u003c\/strong\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003eT1 HSS offers superior edge retention and can be resharpened multiple times, making it ideal for professional use and long-term value.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ-4: How do I choose between resharpenable and disposable blades?\u003c\/strong\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003eResharpenable blades suit workshops with sharpening capability and frequent use. Disposable blades are ideal where speed and minimal downtime are priorities.\u003c\/span\u003e\u003c\/p\u003e","brand":"Xcalibur Tooling","offers":[{"title":"Default Title","offer_id":52408355225866,"sku":"250253-3","price":34.49,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/4195\/4570\/files\/01-Main_41e7d64d-833a-4446-bef0-0ab602bb2681.jpg?v=1776422995"},{"product_id":"bernardo-adm410-planer-blades-410mm-t1-hss-pack-of-2-knives-made-in-the-uk-by-xcalibur-tooling","title":"Bernardo ADM410 Planer Blades 410mm T1 HSS Pack of 2 Knives Made in the UK by Xcalibur Tooling","description":"\u003cp dir=\"ltr\"\u003e\u003cspan\u003eManufactured in the UK by \u003c\/span\u003e\u003cstrong\u003eXcalibur Tooling\u003c\/strong\u003e\u003cspan\u003e, these premium planer blades are engineered specifically for the \u003cstrong\u003eBernardo ADM410\u003c\/strong\u003e\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003eplaner\/thicknesser. Designed for accuracy, durability, and surface finish, they are trusted by professional workshops and serious woodworkers who demand consistent performance.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe \u003c\/span\u003e\u003cstrong\u003eresharpenable version\u003c\/strong\u003e\u003cspan\u003e is produced from \u003c\/span\u003e\u003cstrong\u003eT1 High Speed Steel (HSS)\u003c\/strong\u003e\u003cspan\u003e — a high-tungsten steel grade renowned for exceptional edge retention, toughness, and resistance to heat build-up during cutting. Each blade is fully heat-treated, stress-relieved, and \u003c\/span\u003e\u003cstrong\u003eprecision ground to a standard cutting angle of approximately 40°\u003c\/strong\u003e\u003cspan\u003e, which is widely accepted as the optimal bevel for planer knives, delivering a clean cut while maintaining edge strength across hardwoods and softwoods.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eWhere specified, \u003c\/span\u003e\u003cstrong\u003edisposable blades\u003c\/strong\u003e\u003cspan\u003e are manufactured from hardened industrial steel and ground to the same geometry, offering quick blade changes and reduced downtime where sharpening facilities are not required.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eAll blades are ground to tight dimensional tolerances to ensure correct seating in the cutter block, reduced vibration, and even material removal. The controlled manufacturing process ensures thickness consistency across each pack, helping achieve an accurate knife set and a superior planed finish straight off the machine.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003ePack sizes are clearly stated to suit different cutter block configurations, and every blade reflects Xcalibur Tooling’s commitment to precision, longevity, and UK manufacturing quality.\u003c\/span\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eTECHNICAL SPECIFICATION\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cstrong\u003eMachine Compatibility:\u003c\/strong\u003e\u003cspan\u003e Bernardo ADM410\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cstrong\u003eBlade Length:\u003c\/strong\u003e\u003cspan\u003e 410 mm\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cstrong\u003eCutting Edge Angle:\u003c\/strong\u003e\u003cspan\u003e Approx. \u003c\/span\u003e\u003cspan\u003e40° bevel\u003c\/span\u003e\u003cspan\u003e (industry-standard planer knife geometry)\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cstrong\u003eMaterial (Resharpenable):\u003c\/strong\u003e\u003cspan\u003e T1 High Speed Steel (high-tungsten HSS)\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cstrong\u003eMaterial (Disposable):\u003c\/strong\u003e\u003cspan\u003e Resharpenable\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cstrong\u003ePack Size:\u003c\/strong\u003e\u003cspan\u003e Pack of 2\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cstrong\u003eManufacturing Origin:\u003c\/strong\u003e\u003cspan\u003e Made in the UK\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cstrong\u003eBrand:\u003c\/strong\u003e\u003cspan\u003e Xcalibur Tooling\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eFAQs\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eQ-1: Are these blades direct replacements for the Bernardo ADM410?\u003c\/strong\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003eYes. These blades are manufactured to the correct nominal dimensions and geometry required for the \u003cstrong\u003eBernardo ADM410\u003c\/strong\u003e planer\/thicknesser.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eQ-2: What cutting angle are the blades ground to?\u003c\/strong\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003eAll blades are precision ground to an industry-standard planer knife bevel of approximately \u003c\/span\u003e\u003cstrong\u003e40°\u003c\/strong\u003e\u003cspan\u003e, balancing sharpness, durability, and surface finish.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eQ-3: What is the advantage of T1 HSS blades?\u003c\/strong\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003eT1 HSS offers superior edge retention and can be resharpened multiple times, making it ideal for professional use and long-term value.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ-4: How do I choose between resharpenable and disposable blades?\u003c\/strong\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003eResharpenable blades suit workshops with sharpening capability and frequent use. Disposable blades are ideal where speed and minimal downtime are priorities.\u003c\/span\u003e\u003c\/p\u003e","brand":"Xcalibur Tooling","offers":[{"title":"Default Title","offer_id":52408369381642,"sku":"410353-2","price":34.49,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/4195\/4570\/files\/01-Main_db6d1633-7647-40fd-9b30-64c1c276406c.jpg?v=1772792392"},{"product_id":"bernardo-adh-250-planer-blades-250mm-t1-hss-pack-of-3-knives-made-in-the-uk-by-xcalibur-tooling","title":"Bernardo ADH 250 Planer Blades 250mm T1 HSS Pack of 3 Knives Made in the UK by Xcalibur Tooling","description":"\u003cp dir=\"ltr\"\u003e\u003cspan\u003eManufactured in the UK by \u003c\/span\u003e\u003cstrong\u003eXcalibur Tooling\u003c\/strong\u003e\u003cspan\u003e, these premium planer blades are engineered specifically for the \u003cstrong\u003eBernardo ADH 250\u003c\/strong\u003e\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003eplaner\/thicknesser. Designed for accuracy, durability, and surface finish, they are trusted by professional workshops and serious woodworkers who demand consistent performance.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe \u003c\/span\u003e\u003cstrong\u003eresharpenable version\u003c\/strong\u003e\u003cspan\u003e is produced from \u003c\/span\u003e\u003cstrong\u003eT1 High Speed Steel (HSS)\u003c\/strong\u003e\u003cspan\u003e — a high-tungsten steel grade renowned for exceptional edge retention, toughness, and resistance to heat build-up during cutting. Each blade is fully heat-treated, stress-relieved, and \u003c\/span\u003e\u003cstrong\u003eprecision ground to a standard cutting angle of approximately 40°\u003c\/strong\u003e\u003cspan\u003e, which is widely accepted as the optimal bevel for planer knives, delivering a clean cut while maintaining edge strength across hardwoods and softwoods.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eWhere specified, \u003c\/span\u003e\u003cstrong\u003edisposable blades\u003c\/strong\u003e\u003cspan\u003e are manufactured from hardened industrial steel and ground to the same geometry, offering quick blade changes and reduced downtime where sharpening facilities are not required.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eAll blades are ground to tight dimensional tolerances to ensure correct seating in the cutter block, reduced vibration, and even material removal. The controlled manufacturing process ensures thickness consistency across each pack, helping achieve an accurate knife set and a superior planed finish straight off the machine.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003ePack sizes are clearly stated to suit different cutter block configurations, and every blade reflects Xcalibur Tooling’s commitment to precision, longevity, and UK manufacturing quality.\u003c\/span\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eTECHNICAL SPECIFICATION\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cstrong\u003eMachine Compatibility:\u003c\/strong\u003e\u003cspan\u003e Bernardo ADH 250\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cstrong\u003eBlade Length:\u003c\/strong\u003e\u003cspan\u003e 250 mm\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cstrong\u003eCutting Edge Angle:\u003c\/strong\u003e\u003cspan\u003e Approx. \u003c\/span\u003e\u003cspan\u003e40° bevel\u003c\/span\u003e\u003cspan\u003e (industry-standard planer knife geometry)\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cstrong\u003eMaterial (Resharpenable):\u003c\/strong\u003e\u003cspan\u003e T1 High Speed Steel (high-tungsten HSS)\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cstrong\u003eMaterial (Disposable):\u003c\/strong\u003e\u003cspan\u003e Resharpenable\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cstrong\u003ePack Size:\u003c\/strong\u003e\u003cspan\u003e Pack of 3\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cstrong\u003eManufacturing Origin:\u003c\/strong\u003e\u003cspan\u003e Made in the UK\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cstrong\u003eBrand:\u003c\/strong\u003e\u003cspan\u003e Xcalibur Tooling\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eFAQs\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eQ-1: Are these blades direct replacements for the Bernardo \u003cspan\u003eADH 250\u003c\/span\u003e?\u003c\/strong\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003eYes. These blades are manufactured to the correct nominal dimensions and geometry required for the \u003cstrong\u003eBernardo ADH 250\u003c\/strong\u003e planer\/thicknesser.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eQ-2: What cutting angle are the blades ground to?\u003c\/strong\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003eAll blades are precision ground to an industry-standard planer knife bevel of approximately \u003c\/span\u003e\u003cstrong\u003e40°\u003c\/strong\u003e\u003cspan\u003e, balancing sharpness, durability, and surface finish.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eQ-3: What is the advantage of T1 HSS blades?\u003c\/strong\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003eT1 HSS offers superior edge retention and can be resharpened multiple times, making it ideal for professional use and long-term value.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ-4: How do I choose between resharpenable and disposable blades?\u003c\/strong\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003eResharpenable blades suit workshops with sharpening capability and frequent use. Disposable blades are ideal where speed and minimal downtime are priorities.\u003c\/span\u003e\u003c\/p\u003e","brand":"Xcalibur Tooling","offers":[{"title":"Default Title","offer_id":52408386781450,"sku":"250253-3","price":34.49,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/4195\/4570\/files\/01-Main_41e7d64d-833a-4446-bef0-0ab602bb2681.jpg?v=1776422995"},{"product_id":"bernardo-fs-260-planer-blades-260mm-t1-hss-pack-of-2-knives-made-in-the-uk-by-xcalibur-tooling","title":"Bernardo FS 260 Planer Blades 260mm T1 HSS Pack of 2 Knives Made in the UK by Xcalibur Tooling","description":"\u003ch2\u003eBernardo FS 260 Planer Blades – Precision-Engineered for Exact Fit and Edge Retention\u003c\/h2\u003e\n\u003cp\u003eManufactured in the UK by\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eXcalibur Tooling\u003c\/strong\u003e, these premium planer blades are engineered specifically for the Bernardo FS 260 planer\/thicknesser. Produced for demanding joinery workshops and serious woodworkers, each blade is made from T1 High Speed Steel (HSS) and precision-ground to deliver an accurate, smooth finish on both hardwoods and softwoods. Trusted by professionals across the UK, these knives are the direct replacement for the original HMS260 blades, guaranteeing correct fit and reliable performance.\u003c\/p\u003e\n\u003cp\u003eThe blades are manufactured from T1 HSS, a high-tungsten steel grade selected for its superior edge retention and resistance to heat build-up. This material outperforms standard HSS and high carbon steel in both durability and cutting life, particularly when planing dense British hardwoods such as beech, ash, and oak. Each blade is heat-treated to achieve a hardness of 63 HRC, then stress-relieved to prevent warping during use. The cutting edge is ground to an industry-standard 40° bevel, which is widely recognised as the optimal geometry for balancing sharpness and edge strength across a range of timber species. The single-edged design allows for multiple resharpenings using a standard jig and diamond stone, offering long-term value for workshops with sharpening capability.\u003c\/p\u003e\n\u003cp\u003eDimensional consistency is critical for vibration-free planing and even thicknessing. Every blade is precision-ground to 260mm length, 18mm width, and 3mm thickness, with manufacturing tolerances held within ±0.05mm. This ensures accurate seating in the Bernardo FS 260 cutter block and uniform cutting height across the pair, reducing the risk of chatter or uneven planing. The surface finish on each blade is controlled to Ra 3.2 or better, supporting a clean, tear-free cut even on interlocked or knotty grain. The result is a planed surface ready for finishing with minimal sanding required.\u003c\/p\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMachine Compatibility:\u003c\/strong\u003e\u003cspan\u003e Bernardo FS 260\u003c\/span\u003e (direct fit for original cutter block)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlade Length:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e260 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlade Width:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e18 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlade Thickness:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e3 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eT1 High Speed Steel (HSS, high-tungsten grade)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Edge Angle:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e40° bevel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEdge Type:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eSingle-edged, resharpenable\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePack Size:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e2 blades (1 pair)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturing Origin:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eMade in the UK by Xcalibur Tooling\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eJoinery and cabinet making\u003c\/li\u003e\n\u003cli\u003ePlaning hardwoods (oak, beech, ash, maple)\u003c\/li\u003e\n\u003cli\u003ePlaning softwoods (pine, spruce, cedar)\u003c\/li\u003e\n\u003cli\u003eFurniture panel preparation\u003c\/li\u003e\n\u003cli\u003eWorkshop thicknessing and finishing\u003c\/li\u003e\n\u003cli\u003eGeneral woodworking and timber surfacing\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy Choose Xcalibur Tooling\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eT1 HSS for superior edge retention and heat resistance\u003c\/li\u003e\n\u003cli\u003eResharpenable design for extended life and professional workshop value\u003c\/li\u003e\n\u003cli\u003ePrecision-ground to tight tolerances for vibration-free operation\u003c\/li\u003e\n\u003cli\u003eOver 45 years of UK manufacturing expertise\u003c\/li\u003e\n\u003cli\u003eQuality Guaranteed and trusted by professionals across the UK\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eShipping \u0026amp; Returns\u003c\/h3\u003e\n\u003cp\u003eAll orders dispatched from Bramhall, Cheshire within 1-2 working days. Free standard delivery on all UK orders. Returns accepted within 30 days. Item must be unused and in original packaging.\u003c\/p\u003e\n\u003ch3\u003ePayment\u003c\/h3\u003e\n\u003cp\u003ePayment accepted via PayPal, credit card, debit card through secure checkout. All prices include VAT where applicable.\u003c\/p\u003e\n\u003ch3\u003eFAQs\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Are these planer blades a direct replacement for the Bernardo FS 260?\u003c\/strong\u003e\u003cbr\u003eA: Yes, these blades are manufactured to the exact nominal dimensions required for the Bernardo FS 260 planer\/thicknesser. Each blade measures 260mm in length, 18mm in width, and 3mm in thickness, matching the original specification. Precision-ground and tested on the FS 260 cutter block, they guarantee correct seating and uniform cutting height for reliable, vibration-free operation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: What is the cutting angle of these blades and why is it important?\u003c\/strong\u003e\u003cbr\u003eA: The blades are ground to a 40° bevel, which is the industry standard for planer knives. This angle provides an optimal balance between sharpness and edge durability, delivering a clean, tear-free surface on both hardwoods and softwoods. Maintaining this geometry is essential for efficient chip removal and minimising edge wear during extended use.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: What are the advantages of T1 High Speed Steel compared to standard HSS or TCT?\u003c\/strong\u003e\u003cbr\u003eA: T1 HSS contains a higher tungsten content than standard HSS, resulting in superior edge retention and heat resistance. This means the blades stay sharper for longer, especially when planing dense timbers like beech and oak. Compared to TCT (Tungsten Carbide Tipped), HSS blades can be resharpened multiple times, offering better long-term value for workshops with sharpening facilities, though TCT will last longer between changes on highly abrasive woods.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Can these blades be resharpened, and how many times is typical?\u003c\/strong\u003e\u003cbr\u003eA: Yes, these blades are designed for resharpening. With correct use and sharpening technique, each blade can typically be resharpened 8 to 10 times before reaching minimum safe width. Use a sharpening jig and maintain the 25° to 40° bevel for best results. This resharpenable design significantly reduces ongoing tooling costs for busy workshops.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Are these blades suitable for planing hardwoods such as beech and oak?\u003c\/strong\u003e\u003cbr\u003eA: These T1 HSS blades are specifically engineered for planing both hardwoods and softwoods. The high-tungsten HSS composition and heat-treated structure allow them to maintain a keen edge on dense British hardwoods like beech, oak, and ash. Users can expect a smooth, consistent finish and extended edge life, especially when compared to standard HCS or budget HSS blades.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: How do I install these blades in my Bernardo FS 260?\u003c\/strong\u003e\u003cbr\u003eA: To install these blades, first ensure the machine is disconnected from power. Remove the cutter block guard and loosen the blade clamping screws. Carefully remove the old blades and insert the new Xcalibur Tooling blades, ensuring the cutting edge is aligned with the cutter block reference line. Tighten the screws evenly and check for uniform blade height using a setting jig or dial indicator. Refit the guard and test the machine with a trial cut.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: What maintenance is required to maximise blade life?\u003c\/strong\u003e\u003cbr\u003eA: Regularly clean resin and pitch from the blades using a suitable solvent. Inspect the cutting edge for nicks or dullness after each use. Sharpen the blades before they become excessively dull to maintain surface quality and reduce strain on the machine. Store spare blades in a dry, protected case to prevent corrosion and accidental damage.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Are these blades compatible with any other machines?\u003c\/strong\u003e\u003cbr\u003eA: These blades are specifically manufactured for the Bernardo FS 260 and are not recommended for use in other machines. Using blades in an incompatible cutter block can result in poor fit, vibration, or unsafe operation. Always check your machine's manual and blade specifications before purchasing replacements.\u003c\/p\u003e","brand":"Xcalibur Tooling","offers":[{"title":"Default Title","offer_id":52408407916810,"sku":"260183-2","price":28.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/4195\/4570\/files\/01-Main_db6d1633-7647-40fd-9b30-64c1c276406c.jpg?v=1772792392"},{"product_id":"bernardo-pt-260-planer-blades-260mm-t1-hss-pack-of-2-knives-made-in-the-uk-by-xcalibur-tooling","title":"Bernardo PT 260 Planer Blades 260mm T1 HSS Pack of 2 Knives Made in the UK by Xcalibur Tooling","description":"\u003cp dir=\"ltr\"\u003e\u003cspan\u003eManufactured in the UK by \u003c\/span\u003e\u003cstrong\u003eXcalibur Tooling\u003c\/strong\u003e\u003cspan\u003e, these premium planer blades are engineered specifically for the \u003cstrong\u003eBernardo PT 260\u003c\/strong\u003e\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003eplaner\/thicknesser. Designed for accuracy, durability, and surface finish, they are trusted by professional workshops and serious woodworkers who demand consistent performance.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe \u003c\/span\u003e\u003cstrong\u003eresharpenable version\u003c\/strong\u003e\u003cspan\u003e is produced from \u003c\/span\u003e\u003cstrong\u003eT1 High Speed Steel (HSS)\u003c\/strong\u003e\u003cspan\u003e — a high-tungsten steel grade renowned for exceptional edge retention, toughness, and resistance to heat build-up during cutting. Each blade is fully heat-treated, stress-relieved, and \u003c\/span\u003e\u003cstrong\u003eprecision ground to a standard cutting angle of approximately 40°\u003c\/strong\u003e\u003cspan\u003e, which is widely accepted as the optimal bevel for planer knives, delivering a clean cut while maintaining edge strength across hardwoods and softwoods.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eWhere specified, \u003c\/span\u003e\u003cstrong\u003edisposable blades\u003c\/strong\u003e\u003cspan\u003e are manufactured from hardened industrial steel and ground to the same geometry, offering quick blade changes and reduced downtime where sharpening facilities are not required.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eAll blades are ground to tight dimensional tolerances to ensure correct seating in the cutter block, reduced vibration, and even material removal. The controlled manufacturing process ensures thickness consistency across each pack, helping achieve an accurate knife set and a superior planed finish straight off the machine.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003ePack sizes are clearly stated to suit different cutter block configurations, and every blade reflects Xcalibur Tooling’s commitment to precision, longevity, and UK manufacturing quality.\u003c\/span\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eTECHNICAL SPECIFICATION\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cstrong\u003eMachine Compatibility:\u003c\/strong\u003e\u003cspan\u003e Bernardo PT 260\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cstrong\u003eBlade Length:\u003c\/strong\u003e\u003cspan\u003e 260 mm\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cstrong\u003eCutting Edge Angle:\u003c\/strong\u003e\u003cspan\u003e Approx. \u003c\/span\u003e\u003cspan\u003e40° bevel\u003c\/span\u003e\u003cspan\u003e (industry-standard planer knife geometry)\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cstrong\u003eMaterial (Resharpenable):\u003c\/strong\u003e\u003cspan\u003e T1 High Speed Steel (high-tungsten HSS)\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cstrong\u003eMaterial (Disposable):\u003c\/strong\u003e\u003cspan\u003e Resharpenable\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cstrong\u003ePack Size:\u003c\/strong\u003e\u003cspan\u003e Pack of 2\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cstrong\u003eManufacturing Origin:\u003c\/strong\u003e\u003cspan\u003e Made in the UK\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cstrong\u003eBrand:\u003c\/strong\u003e\u003cspan\u003e Xcalibur Tooling\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eFAQs\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eQ-1: Are these blades direct replacements for the Bernardo PT 260?\u003c\/strong\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003eYes. These blades are manufactured to the correct nominal dimensions and geometry required for the \u003cstrong\u003eBernardo PT 260\u003c\/strong\u003e planer\/thicknesser.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eQ-2: What cutting angle are the blades ground to?\u003c\/strong\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003eAll blades are precision ground to an industry-standard planer knife bevel of approximately \u003c\/span\u003e\u003cstrong\u003e40°\u003c\/strong\u003e\u003cspan\u003e, balancing sharpness, durability, and surface finish.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eQ-3: What is the advantage of T1 HSS blades?\u003c\/strong\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003eT1 HSS offers superior edge retention and can be resharpened multiple times, making it ideal for professional use and long-term value.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ-4: How do I choose between resharpenable and disposable blades?\u003c\/strong\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003eResharpenable blades suit workshops with sharpening capability and frequent use. Disposable blades are ideal where speed and minimal downtime are priorities.\u003c\/span\u003e\u003c\/p\u003e","brand":"Xcalibur Tooling","offers":[{"title":"Default Title","offer_id":52408427053322,"sku":"2602025-2","price":28.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/4195\/4570\/files\/01-Main_db6d1633-7647-40fd-9b30-64c1c276406c.jpg?v=1772792392"},{"product_id":"bernardo-universal-kombi-cwm-310-f-2000-planer-blades-310mm-t1-hss-pack-of-2-knives-made-in-the-uk-by-xcalibur-tooling","title":"Bernardo Universal Kombi CWM 310 F - 2000 Planer Blades 310mm T1 HSS Pack of 2 Knives Made in the UK by Xcalibur Tooling","description":"\u003cp dir=\"ltr\"\u003e\u003cspan\u003eManufactured in the UK by \u003c\/span\u003e\u003cstrong\u003eXcalibur Tooling\u003c\/strong\u003e\u003cspan\u003e, these premium planer blades are engineered specifically for the \u003cstrong\u003eBernardo Universal Kombi CWM 310 F - 2000\u003c\/strong\u003e\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003eplaner\/thicknesser. Designed for accuracy, durability, and surface finish, they are trusted by professional workshops and serious woodworkers who demand consistent performance.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe \u003c\/span\u003e\u003cstrong\u003eresharpenable version\u003c\/strong\u003e\u003cspan\u003e is produced from \u003c\/span\u003e\u003cstrong\u003eT1 High Speed Steel (HSS)\u003c\/strong\u003e\u003cspan\u003e — a high-tungsten steel grade renowned for exceptional edge retention, toughness, and resistance to heat build-up during cutting. Each blade is fully heat-treated, stress-relieved, and \u003c\/span\u003e\u003cstrong\u003eprecision ground to a standard cutting angle of approximately 40°\u003c\/strong\u003e\u003cspan\u003e, which is widely accepted as the optimal bevel for planer knives, delivering a clean cut while maintaining edge strength across hardwoods and softwoods.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eWhere specified, \u003c\/span\u003e\u003cstrong\u003edisposable blades\u003c\/strong\u003e\u003cspan\u003e are manufactured from hardened industrial steel and ground to the same geometry, offering quick blade changes and reduced downtime where sharpening facilities are not required.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eAll blades are ground to tight dimensional tolerances to ensure correct seating in the cutter block, reduced vibration, and even material removal. The controlled manufacturing process ensures thickness consistency across each pack, helping achieve an accurate knife set and a superior planed finish straight off the machine.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003ePack sizes are clearly stated to suit different cutter block configurations, and every blade reflects Xcalibur Tooling’s commitment to precision, longevity, and UK manufacturing quality.\u003c\/span\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eTECHNICAL SPECIFICATION\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cstrong\u003eMachine Compatibility:\u003c\/strong\u003e\u003cspan\u003e Bernardo Universal Kombi CWM 310 F - 2000\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cstrong\u003eBlade Length:\u003c\/strong\u003e\u003cspan\u003e 310 mm\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cstrong\u003eCutting Edge Angle:\u003c\/strong\u003e\u003cspan\u003e Approx. \u003c\/span\u003e\u003cspan\u003e40° bevel\u003c\/span\u003e\u003cspan\u003e (industry-standard planer knife geometry)\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cstrong\u003eMaterial (Resharpenable):\u003c\/strong\u003e\u003cspan\u003e T1 High Speed Steel (high-tungsten HSS)\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cstrong\u003eMaterial (Disposable):\u003c\/strong\u003e\u003cspan\u003e Resharpenable\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cstrong\u003ePack Size:\u003c\/strong\u003e\u003cspan\u003e Pack of 2\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cstrong\u003eManufacturing Origin:\u003c\/strong\u003e\u003cspan\u003e Made in the UK\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cstrong\u003eBrand:\u003c\/strong\u003e\u003cspan\u003e Xcalibur Tooling\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eFAQs\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eQ-1: Are these blades direct replacements for the Bernardo \u003cspan\u003eUniversal Kombi CWM 310 F - 2000\u003c\/span\u003e?\u003c\/strong\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003eYes. These blades are manufactured to the correct nominal dimensions and geometry required for the \u003cstrong\u003eBernardo Universal Kombi CWM 310 F - 2000\u003c\/strong\u003e planer\/thicknesser.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eQ-2: What cutting angle are the blades ground to?\u003c\/strong\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003eAll blades are precision ground to an industry-standard planer knife bevel of approximately \u003c\/span\u003e\u003cstrong\u003e40°\u003c\/strong\u003e\u003cspan\u003e, balancing sharpness, durability, and surface finish.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eQ-3: What is the advantage of T1 HSS blades?\u003c\/strong\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003eT1 HSS offers superior edge retention and can be resharpened multiple times, making it ideal for professional use and long-term value.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ-4: How do I choose between resharpenable and disposable blades?\u003c\/strong\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003eResharpenable blades suit workshops with sharpening capability and frequent use. Disposable blades are ideal where speed and minimal downtime are priorities.\u003c\/span\u003e\u003c\/p\u003e","brand":"Xcalibur Tooling","offers":[{"title":"Default Title","offer_id":52408442519818,"sku":"310303-2","price":28.49,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/4195\/4570\/files\/01-Main_db6d1633-7647-40fd-9b30-64c1c276406c.jpg?v=1772792392"},{"product_id":"bernardo-15-1004-planer-blades-305mm-t1-hss-pack-of-2-knives-made-in-the-uk-by-xcalibur-tooling","title":"Bernardo 15-1004 Planer Blades 305mm T1 HSS Pack of 2 Knives Made in the UK by Xcalibur Tooling","description":"\u003cp dir=\"ltr\"\u003e\u003cspan\u003eManufactured in the UK by \u003c\/span\u003e\u003cstrong\u003eXcalibur Tooling\u003c\/strong\u003e\u003cspan\u003e, these premium planer blades are engineered specifically for the \u003cstrong\u003eBernardo 15-1004\u003c\/strong\u003e\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003eplaner\/thicknesser. Designed for accuracy, durability, and surface finish, they are trusted by professional workshops and serious woodworkers who demand consistent performance.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe \u003c\/span\u003e\u003cstrong\u003eresharpenable version\u003c\/strong\u003e\u003cspan\u003e is produced from \u003c\/span\u003e\u003cstrong\u003eT1 High Speed Steel (HSS)\u003c\/strong\u003e\u003cspan\u003e — a high-tungsten steel grade renowned for exceptional edge retention, toughness, and resistance to heat build-up during cutting. Each blade is fully heat-treated, stress-relieved, and \u003c\/span\u003e\u003cstrong\u003eprecision ground to a standard cutting angle of approximately 40°\u003c\/strong\u003e\u003cspan\u003e, which is widely accepted as the optimal bevel for planer knives, delivering a clean cut while maintaining edge strength across hardwoods and softwoods.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eWhere specified, \u003c\/span\u003e\u003cstrong\u003edisposable blades\u003c\/strong\u003e\u003cspan\u003e are manufactured from hardened industrial steel and ground to the same geometry, offering quick blade changes and reduced downtime where sharpening facilities are not required.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eAll blades are ground to tight dimensional tolerances to ensure correct seating in the cutter block, reduced vibration, and even material removal. The controlled manufacturing process ensures thickness consistency across each pack, helping achieve an accurate knife set and a superior planed finish straight off the machine.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003ePack sizes are clearly stated to suit different cutter block configurations, and every blade reflects Xcalibur Tooling’s commitment to precision, longevity, and UK manufacturing quality.\u003c\/span\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eTECHNICAL SPECIFICATION\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cstrong\u003eMachine Compatibility:\u003c\/strong\u003e\u003cspan\u003e Bernardo 15-1004\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cstrong\u003eBlade Length:\u003c\/strong\u003e\u003cspan\u003e 305 mm\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cstrong\u003eCutting Edge Angle:\u003c\/strong\u003e\u003cspan\u003e Approx. \u003c\/span\u003e\u003cspan\u003e40° bevel\u003c\/span\u003e\u003cspan\u003e (industry-standard planer knife geometry)\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cstrong\u003eMaterial (Resharpenable):\u003c\/strong\u003e\u003cspan\u003e T1 High Speed Steel (high-tungsten HSS)\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cstrong\u003eMaterial (Disposable):\u003c\/strong\u003e\u003cspan\u003e Resharpenable\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cstrong\u003ePack Size:\u003c\/strong\u003e\u003cspan\u003e Pack of 2\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cstrong\u003eManufacturing Origin:\u003c\/strong\u003e\u003cspan\u003e Made in the UK\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cstrong\u003eBrand:\u003c\/strong\u003e\u003cspan\u003e Xcalibur Tooling\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eFAQs\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eQ-1: Are these blades direct replacements for the Bernardo \u003cspan\u003e15-1004\u003c\/span\u003e?\u003c\/strong\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003eYes. These blades are manufactured to the correct nominal dimensions and geometry required for the \u003cstrong\u003eBernardo 15-1004\u003c\/strong\u003e planer\/thicknesser.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eQ-2: What cutting angle are the blades ground to?\u003c\/strong\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003eAll blades are precision ground to an industry-standard planer knife bevel of approximately \u003c\/span\u003e\u003cstrong\u003e40°\u003c\/strong\u003e\u003cspan\u003e, balancing sharpness, durability, and surface finish.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eQ-3: What is the advantage of T1 HSS blades?\u003c\/strong\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003eT1 HSS offers superior edge retention and can be resharpened multiple times, making it ideal for professional use and long-term value.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ-4: How do I choose between resharpenable and disposable blades?\u003c\/strong\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003eResharpenable blades suit workshops with sharpening capability and frequent use. Disposable blades are ideal where speed and minimal downtime are priorities.\u003c\/span\u003e\u003c\/p\u003e","brand":"Xcalibur Tooling","offers":[{"title":"Default Title","offer_id":52408453595402,"sku":"305253-2","price":28.49,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/4195\/4570\/files\/01-Main_db6d1633-7647-40fd-9b30-64c1c276406c.jpg?v=1772792392"},{"product_id":"bernardo-universal-kombi-cwm-250-r-planer-blades-250mm-t1-hss-pack-of-3-knives-made-in-the-uk-by-xcalibur-tooling","title":"Bernardo Universal Kombi CWM 250 R Planer Blades 250mm T1 HSS Pack of 3 Knives Made in the UK by Xcalibur Tooling","description":"\u003cp dir=\"ltr\"\u003e\u003cspan\u003eManufactured in the UK by \u003c\/span\u003e\u003cstrong\u003eXcalibur Tooling\u003c\/strong\u003e\u003cspan\u003e, these premium planer blades are engineered specifically for the \u003cstrong\u003eBernardo Universal Kombi CWM 250 R\u003c\/strong\u003e\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003eplaner\/thicknesser. Designed for accuracy, durability, and surface finish, they are trusted by professional workshops and serious woodworkers who demand consistent performance.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe \u003c\/span\u003e\u003cstrong\u003eresharpenable version\u003c\/strong\u003e\u003cspan\u003e is produced from \u003c\/span\u003e\u003cstrong\u003eT1 High Speed Steel (HSS)\u003c\/strong\u003e\u003cspan\u003e — a high-tungsten steel grade renowned for exceptional edge retention, toughness, and resistance to heat build-up during cutting. Each blade is fully heat-treated, stress-relieved, and \u003c\/span\u003e\u003cstrong\u003eprecision ground to a standard cutting angle of approximately 40°\u003c\/strong\u003e\u003cspan\u003e, which is widely accepted as the optimal bevel for planer knives, delivering a clean cut while maintaining edge strength across hardwoods and softwoods.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eWhere specified, \u003c\/span\u003e\u003cstrong\u003edisposable blades\u003c\/strong\u003e\u003cspan\u003e are manufactured from hardened industrial steel and ground to the same geometry, offering quick blade changes and reduced downtime where sharpening facilities are not required.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eAll blades are ground to tight dimensional tolerances to ensure correct seating in the cutter block, reduced vibration, and even material removal. The controlled manufacturing process ensures thickness consistency across each pack, helping achieve an accurate knife set and a superior planed finish straight off the machine.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003ePack sizes are clearly stated to suit different cutter block configurations, and every blade reflects Xcalibur Tooling’s commitment to precision, longevity, and UK manufacturing quality.\u003c\/span\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eTECHNICAL SPECIFICATION\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cstrong\u003eMachine Compatibility:\u003c\/strong\u003e\u003cspan\u003e Bernardo Universal Kombi CWM 250 R\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cstrong\u003eBlade Length:\u003c\/strong\u003e\u003cspan\u003e 250 mm\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cstrong\u003eCutting Edge Angle:\u003c\/strong\u003e\u003cspan\u003e Approx. \u003c\/span\u003e\u003cspan\u003e40° bevel\u003c\/span\u003e\u003cspan\u003e (industry-standard planer knife geometry)\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cstrong\u003eMaterial (Resharpenable):\u003c\/strong\u003e\u003cspan\u003e T1 High Speed Steel (high-tungsten HSS)\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cstrong\u003eMaterial (Disposable):\u003c\/strong\u003e\u003cspan\u003e Resharpenable\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cstrong\u003ePack Size:\u003c\/strong\u003e\u003cspan\u003e Pack of 3\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cstrong\u003eManufacturing Origin:\u003c\/strong\u003e\u003cspan\u003e Made in the UK\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cstrong\u003eBrand:\u003c\/strong\u003e\u003cspan\u003e Xcalibur Tooling\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eFAQs\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eQ-1: Are these blades direct replacements for the Bernardo \u003cspan\u003eUniversal Kombi CWM 250 R\u003c\/span\u003e?\u003c\/strong\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003eYes. These blades are manufactured to the correct nominal dimensions and geometry required for the \u003cstrong\u003eBernardo Universal Kombi CWM 250 R\u003c\/strong\u003e planer\/thicknesser.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eQ-2: What cutting angle are the blades ground to?\u003c\/strong\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003eAll blades are precision ground to an industry-standard planer knife bevel of approximately \u003c\/span\u003e\u003cstrong\u003e40°\u003c\/strong\u003e\u003cspan\u003e, balancing sharpness, durability, and surface finish.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eQ-3: What is the advantage of T1 HSS blades?\u003c\/strong\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003eT1 HSS offers superior edge retention and can be resharpened multiple times, making it ideal for professional use and long-term value.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ-4: How do I choose between resharpenable and disposable blades?\u003c\/strong\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003eResharpenable blades suit workshops with sharpening capability and frequent use. Disposable blades are ideal where speed and minimal downtime are priorities.\u003c\/span\u003e\u003c\/p\u003e","brand":"Xcalibur Tooling","offers":[{"title":"Default Title","offer_id":52408464310538,"sku":"250253-3","price":34.49,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/4195\/4570\/files\/01-Main_41e7d64d-833a-4446-bef0-0ab602bb2681.jpg?v=1776422995"},{"product_id":"bernardo-tp-410-planer-blades-410mm-t1-hss-pack-of-2-knives-made-in-the-uk-by-xcalibur-tooling","title":"Bernardo TP 410 Planer Blades 410mm T1 HSS Pack of 2 Knives Made in the UK by Xcalibur Tooling","description":"\u003cp dir=\"ltr\"\u003e\u003cspan\u003eManufactured in the UK by \u003c\/span\u003e\u003cstrong\u003eXcalibur Tooling\u003c\/strong\u003e\u003cspan\u003e, these premium planer blades are engineered specifically for the \u003cstrong\u003eBernardo TP 410\u003c\/strong\u003e\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003eplaner\/thicknesser. Designed for accuracy, durability, and surface finish, they are trusted by professional workshops and serious woodworkers who demand consistent performance.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe \u003c\/span\u003e\u003cstrong\u003eresharpenable version\u003c\/strong\u003e\u003cspan\u003e is produced from \u003c\/span\u003e\u003cstrong\u003eT1 High Speed Steel (HSS)\u003c\/strong\u003e\u003cspan\u003e — a high-tungsten steel grade renowned for exceptional edge retention, toughness, and resistance to heat build-up during cutting. Each blade is fully heat-treated, stress-relieved, and \u003c\/span\u003e\u003cstrong\u003eprecision ground to a standard cutting angle of approximately 40°\u003c\/strong\u003e\u003cspan\u003e, which is widely accepted as the optimal bevel for planer knives, delivering a clean cut while maintaining edge strength across hardwoods and softwoods.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eWhere specified, \u003c\/span\u003e\u003cstrong\u003edisposable blades\u003c\/strong\u003e\u003cspan\u003e are manufactured from hardened industrial steel and ground to the same geometry, offering quick blade changes and reduced downtime where sharpening facilities are not required.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eAll blades are ground to tight dimensional tolerances to ensure correct seating in the cutter block, reduced vibration, and even material removal. The controlled manufacturing process ensures thickness consistency across each pack, helping achieve an accurate knife set and a superior planed finish straight off the machine.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003ePack sizes are clearly stated to suit different cutter block configurations, and every blade reflects Xcalibur Tooling’s commitment to precision, longevity, and UK manufacturing quality.\u003c\/span\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eTECHNICAL SPECIFICATION\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cstrong\u003eMachine Compatibility:\u003c\/strong\u003e\u003cspan\u003e Bernardo TP 410\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cstrong\u003eBlade Length:\u003c\/strong\u003e\u003cspan\u003e 410 mm\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cstrong\u003eCutting Edge Angle:\u003c\/strong\u003e\u003cspan\u003e Approx. \u003c\/span\u003e\u003cspan\u003e40° bevel\u003c\/span\u003e\u003cspan\u003e (industry-standard planer knife geometry)\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cstrong\u003eMaterial (Resharpenable):\u003c\/strong\u003e\u003cspan\u003e T1 High Speed Steel (high-tungsten HSS)\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cstrong\u003eMaterial (Disposable):\u003c\/strong\u003e\u003cspan\u003e Resharpenable\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cstrong\u003ePack Size:\u003c\/strong\u003e\u003cspan\u003e Pack of 2\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cstrong\u003eManufacturing Origin:\u003c\/strong\u003e\u003cspan\u003e Made in the UK\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cstrong\u003eBrand:\u003c\/strong\u003e\u003cspan\u003e Xcalibur Tooling\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eFAQs\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eQ-1: Are these blades direct replacements for the Bernardo TP 410?\u003c\/strong\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003eYes. These blades are manufactured to the correct nominal dimensions and geometry required for the \u003cstrong\u003eBernardo TP 410\u003c\/strong\u003e planer\/thicknesser.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eQ-2: What cutting angle are the blades ground to?\u003c\/strong\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003eAll blades are precision ground to an industry-standard planer knife bevel of approximately \u003c\/span\u003e\u003cstrong\u003e40°\u003c\/strong\u003e\u003cspan\u003e, balancing sharpness, durability, and surface finish.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eQ-3: What is the advantage of T1 HSS blades?\u003c\/strong\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003eT1 HSS offers superior edge retention and can be resharpened multiple times, making it ideal for professional use and long-term value.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ-4: How do I choose between resharpenable and disposable blades?\u003c\/strong\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003eResharpenable blades suit workshops with sharpening capability and frequent use. Disposable blades are ideal where speed and minimal downtime are priorities.\u003c\/span\u003e\u003c\/p\u003e","brand":"Xcalibur Tooling","offers":[{"title":"Default Title","offer_id":52408482005258,"sku":"410253-2","price":33.49,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/4195\/4570\/files\/01-Main_db6d1633-7647-40fd-9b30-64c1c276406c.jpg?v=1772792392"},{"product_id":"bernardo-adm-311-planer-blades-310mm-t1-hss-pack-of-2-knives-made-in-the-uk-by-xcalibur-tooling","title":"Bernardo ADM 311 Planer Blades 310mm T1 HSS Pack of 2 Knives Made in the UK by Xcalibur Tooling","description":"\u003cp dir=\"ltr\"\u003e\u003cspan\u003eManufactured in the UK by \u003c\/span\u003e\u003cstrong\u003eXcalibur Tooling\u003c\/strong\u003e\u003cspan\u003e, these premium planer blades are engineered specifically for the \u003cstrong\u003eBernardo ADM 311\u003c\/strong\u003e\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003eplaner\/thicknesser. Designed for accuracy, durability, and surface finish, they are trusted by professional workshops and serious woodworkers who demand consistent performance.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe \u003c\/span\u003e\u003cstrong\u003eresharpenable version\u003c\/strong\u003e\u003cspan\u003e is produced from \u003c\/span\u003e\u003cstrong\u003eT1 High Speed Steel (HSS)\u003c\/strong\u003e\u003cspan\u003e — a high-tungsten steel grade renowned for exceptional edge retention, toughness, and resistance to heat build-up during cutting. Each blade is fully heat-treated, stress-relieved, and \u003c\/span\u003e\u003cstrong\u003eprecision ground to a standard cutting angle of approximately 40°\u003c\/strong\u003e\u003cspan\u003e, which is widely accepted as the optimal bevel for planer knives, delivering a clean cut while maintaining edge strength across hardwoods and softwoods.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eWhere specified, \u003c\/span\u003e\u003cstrong\u003edisposable blades\u003c\/strong\u003e\u003cspan\u003e are manufactured from hardened industrial steel and ground to the same geometry, offering quick blade changes and reduced downtime where sharpening facilities are not required.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eAll blades are ground to tight dimensional tolerances to ensure correct seating in the cutter block, reduced vibration, and even material removal. The controlled manufacturing process ensures thickness consistency across each pack, helping achieve an accurate knife set and a superior planed finish straight off the machine.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003ePack sizes are clearly stated to suit different cutter block configurations, and every blade reflects Xcalibur Tooling’s commitment to precision, longevity, and UK manufacturing quality.\u003c\/span\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eTECHNICAL SPECIFICATION\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cstrong\u003eMachine Compatibility:\u003c\/strong\u003e\u003cspan\u003e Bernardo ADM 311\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cstrong\u003eBlade Length:\u003c\/strong\u003e\u003cspan\u003e 310 mm\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cstrong\u003eCutting Edge Angle:\u003c\/strong\u003e\u003cspan\u003e Approx. \u003c\/span\u003e\u003cspan\u003e40° bevel\u003c\/span\u003e\u003cspan\u003e (industry-standard planer knife geometry)\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cstrong\u003eMaterial (Resharpenable):\u003c\/strong\u003e\u003cspan\u003e T1 High Speed Steel (high-tungsten HSS)\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cstrong\u003eMaterial (Disposable):\u003c\/strong\u003e\u003cspan\u003e Resharpenable\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cstrong\u003ePack Size:\u003c\/strong\u003e\u003cspan\u003e Pack of 2\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cstrong\u003eManufacturing Origin:\u003c\/strong\u003e\u003cspan\u003e Made in the UK\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cstrong\u003eBrand:\u003c\/strong\u003e\u003cspan\u003e Xcalibur Tooling\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eFAQs\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eQ-1: Are these blades direct replacements for the Bernardo \u003cspan\u003eADM 311\u003c\/span\u003e?\u003c\/strong\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003eYes. These blades are manufactured to the correct nominal dimensions and geometry required for the \u003cstrong\u003eBernardo ADM 311\u003c\/strong\u003e planer\/thicknesser.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eQ-2: What cutting angle are the blades ground to?\u003c\/strong\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003eAll blades are precision ground to an industry-standard planer knife bevel of approximately \u003c\/span\u003e\u003cstrong\u003e40°\u003c\/strong\u003e\u003cspan\u003e, balancing sharpness, durability, and surface finish.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eQ-3: What is the advantage of T1 HSS blades?\u003c\/strong\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003eT1 HSS offers superior edge retention and can be resharpened multiple times, making it ideal for professional use and long-term value.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ-4: How do I choose between resharpenable and disposable blades?\u003c\/strong\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003eResharpenable blades suit workshops with sharpening capability and frequent use. Disposable blades are ideal where speed and minimal downtime are priorities.\u003c\/span\u003e\u003c\/p\u003e","brand":"Xcalibur Tooling","offers":[{"title":"Default Title","offer_id":52408494293258,"sku":"310303-2","price":28.49,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/4195\/4570\/files\/01-Main_db6d1633-7647-40fd-9b30-64c1c276406c.jpg?v=1772792392"},{"product_id":"bernardo-fs-310-n-planer-blades-310mm-t1-hss-pack-of-2-knives-made-in-the-uk-by-xcalibur-tooling","title":"Bernardo FS 310 N Planer Blades 310mm T1 HSS Pack of 2 Knives Made in the UK by Xcalibur Tooling","description":"\u003cp dir=\"ltr\"\u003e\u003cspan\u003eManufactured in the UK by \u003c\/span\u003e\u003cstrong\u003eXcalibur Tooling\u003c\/strong\u003e\u003cspan\u003e, these premium planer blades are engineered specifically for the \u003cstrong\u003eBernardo FS 310 N\u003c\/strong\u003e\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003eplaner\/thicknesser. Designed for accuracy, durability, and surface finish, they are trusted by professional workshops and serious woodworkers who demand consistent performance.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe \u003c\/span\u003e\u003cstrong\u003eresharpenable version\u003c\/strong\u003e\u003cspan\u003e is produced from \u003c\/span\u003e\u003cstrong\u003eT1 High Speed Steel (HSS)\u003c\/strong\u003e\u003cspan\u003e — a high-tungsten steel grade renowned for exceptional edge retention, toughness, and resistance to heat build-up during cutting. Each blade is fully heat-treated, stress-relieved, and \u003c\/span\u003e\u003cstrong\u003eprecision ground to a standard cutting angle of approximately 40°\u003c\/strong\u003e\u003cspan\u003e, which is widely accepted as the optimal bevel for planer knives, delivering a clean cut while maintaining edge strength across hardwoods and softwoods.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eWhere specified, \u003c\/span\u003e\u003cstrong\u003edisposable blades\u003c\/strong\u003e\u003cspan\u003e are manufactured from hardened industrial steel and ground to the same geometry, offering quick blade changes and reduced downtime where sharpening facilities are not required.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eAll blades are ground to tight dimensional tolerances to ensure correct seating in the cutter block, reduced vibration, and even material removal. The controlled manufacturing process ensures thickness consistency across each pack, helping achieve an accurate knife set and a superior planed finish straight off the machine.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003ePack sizes are clearly stated to suit different cutter block configurations, and every blade reflects Xcalibur Tooling’s commitment to precision, longevity, and UK manufacturing quality.\u003c\/span\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eTECHNICAL SPECIFICATION\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cstrong\u003eMachine Compatibility:\u003c\/strong\u003e\u003cspan\u003e Bernardo FS 310 N\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cstrong\u003eBlade Length:\u003c\/strong\u003e\u003cspan\u003e 310 mm\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cstrong\u003eCutting Edge Angle:\u003c\/strong\u003e\u003cspan\u003e Approx. \u003c\/span\u003e\u003cspan\u003e40° bevel\u003c\/span\u003e\u003cspan\u003e (industry-standard planer knife geometry)\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cstrong\u003eMaterial (Resharpenable):\u003c\/strong\u003e\u003cspan\u003e T1 High Speed Steel (high-tungsten HSS)\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cstrong\u003eMaterial (Disposable):\u003c\/strong\u003e\u003cspan\u003e Resharpenable\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cstrong\u003ePack Size:\u003c\/strong\u003e\u003cspan\u003e Pack of 2\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cstrong\u003eManufacturing Origin:\u003c\/strong\u003e\u003cspan\u003e Made in the UK\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cstrong\u003eBrand:\u003c\/strong\u003e\u003cspan\u003e Xcalibur Tooling\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eFAQs\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eQ-1: Are these blades direct replacements for the Bernardo FS 310 N?\u003c\/strong\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003eYes. These blades are manufactured to the correct nominal dimensions and geometry required for the \u003cstrong\u003eBernardo FS 310 N\u003c\/strong\u003e planer\/thicknesser.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eQ-2: What cutting angle are the blades ground to?\u003c\/strong\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003eAll blades are precision ground to an industry-standard planer knife bevel of approximately \u003c\/span\u003e\u003cstrong\u003e40°\u003c\/strong\u003e\u003cspan\u003e, balancing sharpness, durability, and surface finish.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eQ-3: What is the advantage of T1 HSS blades?\u003c\/strong\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003eT1 HSS offers superior edge retention and can be resharpened multiple times, making it ideal for professional use and long-term value.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ-4: How do I choose between resharpenable and disposable blades?\u003c\/strong\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003eResharpenable blades suit workshops with sharpening capability and frequent use. Disposable blades are ideal where speed and minimal downtime are priorities.\u003c\/span\u003e\u003c\/p\u003e","brand":"Xcalibur Tooling","offers":[{"title":"Default Title","offer_id":52408662130954,"sku":"310253-2","price":29.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/4195\/4570\/files\/01-Main_db6d1633-7647-40fd-9b30-64c1c276406c.jpg?v=1772792392"},{"product_id":"bernardo-sp-400-planer-blades-405mm-t1-hss-pack-of-2-knives-made-in-the-uk-by-xcalibur-tooling","title":"Bernardo SP 400 Planer Blades 405 x 35 x 3 mm HSS Resharpenable Knives 1 Pair","description":"\u003ch2\u003eBernardo SP 400 Planer Blades, Engineered for Precision and Longevity\u003c\/h2\u003e\n\u003cp\u003eManufactured in the UK by\u003cspan\u003e \u003c\/span\u003e\u003cb\u003eXcalibur Tooling\u003c\/b\u003e, these premium planer blades are engineered specifically for the Bernardo SP 400 planer thicknesser. Trusted by professionals across the UK, these knives are the direct replacement for the original Bernardo SP 400 blades, offering precise fit and reliable performance for both trade workshops and demanding hobbyists. Supplied as a pair, each blade measures 405mm in length, 35mm in width, and 3mm in thickness, matching the exact requirements of the SP 400 cutter block.\u003c\/p\u003e\n\u003cp\u003eEach blade is produced from\u003cspan\u003e \u003c\/span\u003e\u003cb\u003eT1 High Speed Steel (HSS)\u003c\/b\u003e, a high-tungsten alloy renowned for its edge retention and toughness. T1 HSS contains approximately 18% tungsten, which significantly increases wear resistance and heat tolerance when compared to standard M2 HSS grades. The blades are heat-treated and stress-relieved to a hardness of 62 to 63 HRC, providing the durability needed for planing abrasive hardwoods such as oak, beech, and ash, as well as softwoods. The cutting edge is precision-ground to a 40° bevel, which is the industry standard for planer knives. This geometry delivers a smooth finish, minimises tear-out, and maintains edge strength through repeated sharpening cycles. Xcalibur Tooling’s manufacturing process guarantees that each blade is ground flat and parallel, with strict dimensional tolerances maintained along the entire length. This attention to detail ensures correct seating in the cutterblock, uniform chip removal, and reduced vibration during operation.\u003c\/p\u003e\n\u003cp\u003eThe resharpenable single-edged design provides long-term value for workshops equipped with sharpening facilities. Each blade can be resharpened multiple times without loss of performance, making them ideal for continuous use in professional environments. The precision-ground edge and consistent thickness across the pair allow for accurate knife setting, which is essential for achieving a straight, chatter-free planed surface. All Xcalibur blades are supplied with protective edge covers and robust packaging to prevent damage in transit, maintaining the integrity of the cutting edge until installation.\u003c\/p\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMachine Compatibility:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eBernardo SP 400\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlade Length:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e405 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlade Width:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e35 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlade Thickness:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e3 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eT1 High Speed Steel (HSS, high-tungsten)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Edge Angle:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e40° bevel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEdge Type:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eSingle-edged, resharpenable\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePack Size:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e2 blades (1 pair)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturing Origin:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eMade in the UK\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eXcalibur Tooling\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eJoinery and cabinet making\u003c\/li\u003e\n\u003cli\u003ePlaning hardwoods: oak, beech, ash, iroko\u003c\/li\u003e\n\u003cli\u003ePlaning softwoods: pine, spruce, cedar\u003c\/li\u003e\n\u003cli\u003eFurniture production and restoration\u003c\/li\u003e\n\u003cli\u003eGeneral workshop timber preparation\u003c\/li\u003e\n\u003cli\u003eSurface finishing prior to assembly or coating\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy Choose Xcalibur Tooling\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eT1 HSS for superior edge retention and heat resistance\u003c\/li\u003e\n\u003cli\u003eResharpenable single-edged design for long-term use\u003c\/li\u003e\n\u003cli\u003ePrecision-ground for correct cutterblock fit and reduced vibration\u003c\/li\u003e\n\u003cli\u003eOver 45 years of UK manufacturing expertise\u003c\/li\u003e\n\u003cli\u003eQuality Guaranteed, trusted by workshops across the UK\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eShipping \u0026amp; Returns\u003c\/h3\u003e\n\u003cp\u003eAll orders are dispatched from Bramhall, Cheshire within 1-2 working days. Free standard delivery on all UK orders. Returns are accepted within 30 days. Items must be unused and in original packaging.\u003c\/p\u003e\n\u003ch3\u003ePayment\u003c\/h3\u003e\n\u003cp\u003ePayment is accepted via PayPal, credit card, and debit card through our secure checkout. All prices include VAT where applicable.\u003c\/p\u003e\n\u003cp\u003eManufactured in the United Kingdom by Xcalibur Tooling. Over 45 years of manufacturing expertise. Quality Guaranteed. Trusted by Professionals.\u003c\/p\u003e\n\u003ch3\u003eFAQs\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Will these blades fit my Bernardo SP 400 planer thicknesser?\u003c\/strong\u003e\u003cbr\u003eA: Yes, these blades are manufactured to the exact dimensions required for the Bernardo SP 400. Each knife measures 405 mm in length, 35 mm in width, and 3 mm in thickness, matching the original specification. The blades seat correctly in the SP 400 cutterblock, providing a secure fit and reliable performance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: What steel grade are these blades made from, and how does T1 HSS compare to standard HSS?\u003c\/strong\u003e\u003cbr\u003eA: These blades are produced from T1 High Speed Steel, which contains a higher tungsten content (approximately 18%) than standard M2 HSS. T1 HSS offers superior edge retention and heat resistance, making it particularly suitable for planing abrasive hardwoods. The increased hardness (62–63 HRC) means the blades maintain a sharp edge for longer periods between sharpenings, reducing downtime and improving surface quality.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Are these blades resharpenable, and how many times can they be sharpened?\u003c\/strong\u003e\u003cbr\u003eA: Yes, these are single-edged resharpenable blades. The knives can typically be resharpened several times, depending on the amount of material removed during each sharpening and the condition of the edge. Xcalibur Tooling recommends using professional grinding equipment and maintaining the original 40° bevel angle for best results. Regular inspection and careful sharpening will maximise the lifespan of each blade.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Can these blades be used for planing hardwoods such as oak and beech?\u003c\/strong\u003e\u003cbr\u003eA: These T1 HSS blades are engineered for both hardwoods and softwoods, including demanding species like oak, beech, and ash. The high tungsten content and heat-treated structure provide the durability needed for continuous planing of dense timbers. For optimal edge life, use moderate feed rates and avoid excessive depth of cut, especially when working with abrasive or knotty wood.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: How do HSS planer blades compare to TCT blades for the Bernardo SP 400?\u003c\/strong\u003e\u003cbr\u003eA: HSS blades, such as these T1 HSS knives, are resharpenable and provide a fine surface finish across a wide range of timber species. TCT (Tungsten Carbide Tipped) blades offer roughly three times the edge life on abrasive materials but are not resharpenable and are more costly. HSS is preferred in workshops with sharpening facilities and for users who require flexibility across hardwoods and softwoods. TCT is favoured for high-volume production on abrasive timbers where downtime for sharpening must be minimised.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: What is the recommended cutting angle for these blades?\u003c\/strong\u003e\u003cbr\u003eA: The blades are precision-ground to a 40° bevel angle, which is the industry standard for planer knives. This angle provides an optimal balance between edge durability and surface finish, minimising tear-out and maintaining edge strength through repeated sharpening cycles. Maintaining this angle during resharpening is essential for best performance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Are these blades supplied as a pair and do they come with protective packaging?\u003c\/strong\u003e\u003cbr\u003eA: Yes, each pack contains two blades, supplied as a matched pair for the Bernardo SP 400. The blades are shipped with protective edge covers and robust packaging to prevent damage during transit, ensuring the cutting edge remains in perfect condition until installation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Are these blades manufactured in the UK and what quality controls are in place?\u003c\/strong\u003e\u003cbr\u003eA: These blades are manufactured in the United Kingdom by Xcalibur Tooling, a company with over 45 years of experience in producing precision woodworking tools. Each blade undergoes strict quality control checks, including dimensional accuracy, hardness testing, and surface finish inspection, to ensure consistent performance and reliability in professional workshop environments.\u003c\/p\u003e","brand":"Xcalibur Tooling","offers":[{"title":"Default Title","offer_id":53176981258506,"sku":"405353-2","price":36.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/4195\/4570\/files\/01-Main_db6d1633-7647-40fd-9b30-64c1c276406c.jpg?v=1772792392"},{"product_id":"bernardo-adm-410-surface-planer-blades-410-x-35-x-3mm-hss-reshapenable-knives-1-pair","title":"Bernardo ADM 410 Surface Planer Blades 410 x 35 x 3mm HSS Reshapenable Knives - 1 Pair","description":"\u003ch2\u003eBernardo ADM 410 Surface Planer Blades, Engineered for Precision and Longevity\u003c\/h2\u003e\n\u003cp\u003eManufactured in the UK by\u003cspan\u003e \u003c\/span\u003e\u003cb\u003eXcalibur Tooling\u003c\/b\u003e, these premium planer blades are engineered specifically for the Bernardo ADM 410 Surface planer thicknesser. Trusted by professionals across the UK, these knives are the direct replacement for the original Bernardo ADM 410 Surface blades, offering precise fit and reliable performance for both trade workshops and demanding hobbyists. Supplied as a pair, each blade measures 410mm in length, 35mm in width, and 3mm in thickness, matching the exact requirements of the ADM 410 Surface cutter block.\u003c\/p\u003e\n\u003cp\u003eEach blade is produced from\u003cspan\u003e \u003c\/span\u003e\u003cb\u003eT1 High Speed Steel (HSS)\u003c\/b\u003e, a high-tungsten alloy renowned for its edge retention and toughness. T1 HSS contains approximately 18% tungsten, which significantly increases wear resistance and heat tolerance when compared to standard M2 HSS grades. The blades are heat-treated and stress-relieved to a hardness of 62 to 63 HRC, providing the durability needed for planing abrasive hardwoods such as oak, beech, and ash, as well as softwoods. The cutting edge is precision-ground to a 40° bevel, which is the industry standard for planer knives. This geometry delivers a smooth finish, minimises tear-out, and maintains edge strength through repeated sharpening cycles. Xcalibur Tooling’s manufacturing process guarantees that each blade is ground flat and parallel, with strict dimensional tolerances maintained along the entire length. This attention to detail ensures correct seating in the cutterblock, uniform chip removal, and reduced vibration during operation.\u003c\/p\u003e\n\u003cp\u003eThe resharpenable single-edged design provides long-term value for workshops equipped with sharpening facilities. Each blade can be resharpened multiple times without loss of performance, making them ideal for continuous use in professional environments. The precision-ground edge and consistent thickness across the pair allow for accurate knife setting, which is essential for achieving a straight, chatter-free planed surface. All Xcalibur blades are supplied with protective edge covers and robust packaging to prevent damage in transit, maintaining the integrity of the cutting edge until installation.\u003c\/p\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMachine Compatibility:\u003c\/strong\u003e\u003cspan\u003e Bernardo ADM 410 Surface\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlade Length:\u003c\/strong\u003e\u003cspan\u003e 41\u003c\/span\u003e0 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlade Width:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e35 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlade Thickness:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e3 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eT1 High Speed Steel (HSS, high-tungsten)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Edge Angle:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e40° bevel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEdge Type:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eSingle-edged, resharpenable\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePack Size:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e2 blades (1 pair)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturing Origin:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eMade in the UK\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eXcalibur Tooling\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eJoinery and cabinet making\u003c\/li\u003e\n\u003cli\u003ePlaning hardwoods: oak, beech, ash, iroko\u003c\/li\u003e\n\u003cli\u003ePlaning softwoods: pine, spruce, cedar\u003c\/li\u003e\n\u003cli\u003eFurniture production and restoration\u003c\/li\u003e\n\u003cli\u003eGeneral workshop timber preparation\u003c\/li\u003e\n\u003cli\u003eSurface finishing prior to assembly or coating\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy Choose Xcalibur Tooling\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eT1 HSS for superior edge retention and heat resistance\u003c\/li\u003e\n\u003cli\u003eResharpenable single-edged design for long-term use\u003c\/li\u003e\n\u003cli\u003ePrecision-ground for correct cutterblock fit and reduced vibration\u003c\/li\u003e\n\u003cli\u003eOver 45 years of UK manufacturing expertise\u003c\/li\u003e\n\u003cli\u003eQuality Guaranteed, trusted by workshops across the UK\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eShipping \u0026amp; Returns\u003c\/h3\u003e\n\u003cp\u003eAll orders are dispatched from Bramhall, Cheshire within 1-2 working days. Free standard delivery on all UK orders. Returns are accepted within 30 days. Items must be unused and in original packaging.\u003c\/p\u003e\n\u003ch3\u003ePayment\u003c\/h3\u003e\n\u003cp\u003ePayment is accepted via PayPal, credit card, and debit card through our secure checkout. All prices include VAT where applicable.\u003c\/p\u003e\n\u003cp\u003eManufactured in the United Kingdom by Xcalibur Tooling. Over 45 years of manufacturing expertise. Quality Guaranteed. Trusted by Professionals.\u003c\/p\u003e\n\u003ch3\u003eFAQs\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Will these blades fit my Bernardo ADM 410 Surface planer thicknesser?\u003c\/strong\u003e\u003cbr\u003eA: Yes, these blades are manufactured to the exact dimensions required for the Bernardo ADM 410 Surface. Each knife measures 310 mm in length, 35 mm in width, and 3 mm in thickness, matching the original specification. The blades seat correctly in the Bernardo ADM 410 Surface cutter block, providing a secure fit and reliable performance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: What steel grade are these blades made from, and how does T1 HSS compare to standard HSS?\u003c\/strong\u003e\u003cbr\u003eA: These blades are produced from T1 High Speed Steel, which contains a higher tungsten content (approximately 18%) than standard M2 HSS. T1 HSS offers superior edge retention and heat resistance, making it particularly suitable for planing abrasive hardwoods. The increased hardness (62–63 HRC) means the blades maintain a sharp edge for longer periods between sharpenings, reducing downtime and improving surface quality.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Are these blades resharpenable, and how many times can they be sharpened?\u003c\/strong\u003e\u003cbr\u003eA: Yes, these are single-edged resharpenable blades. The knives can typically be resharpened several times, depending on the amount of material removed during each sharpening and the condition of the edge. Xcalibur Tooling recommends using professional grinding equipment and maintaining the original 40° bevel angle for best results. Regular inspection and careful sharpening will maximise the lifespan of each blade.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Can these blades be used for planing hardwoods such as oak and beech?\u003c\/strong\u003e\u003cbr\u003eA: These T1 HSS blades are engineered for both hardwoods and softwoods, including demanding species like oak, beech, and ash. The high tungsten content and heat-treated structure provide the durability needed for continuous planing of dense timbers. For optimal edge life, use moderate feed rates and avoid excessive depth of cut, especially when working with abrasive or knotty wood.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: How do HSS planer blades compare to TCT blades for the Bernardo ADM 410 Surface?\u003c\/strong\u003e\u003cbr\u003eA: HSS blades, such as these T1 HSS knives, are resharpenable and provide a fine surface finish across a wide range of timber species. TCT (Tungsten Carbide Tipped) blades offer roughly three times the edge life on abrasive materials but are not resharpenable and are more costly. HSS is preferred in workshops with sharpening facilities and for users who require flexibility across hardwoods and softwoods. TCT is favoured for high-volume production on abrasive timbers where downtime for sharpening must be minimised.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: What is the recommended cutting angle for these blades?\u003c\/strong\u003e\u003cbr\u003eA: The blades are precision-ground to a 40° bevel angle, which is the industry standard for planer knives. This angle provides an optimal balance between edge durability and surface finish, minimising tear-out and maintaining edge strength through repeated sharpening cycles. Maintaining this angle during resharpening is essential for best performance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Are these blades supplied as a pair and do they come with protective packaging?\u003c\/strong\u003e\u003cbr\u003eA: Yes, each pack contains two blades, supplied as a matched pair for the Bernardo ADM 410 Surface. The blades are shipped with protective edge covers and robust packaging to prevent damage during transit, ensuring the cutting edge remains in perfect condition until installation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Are these blades manufactured in the UK and what quality controls are in place?\u003c\/strong\u003e\u003cbr\u003eA: These blades are manufactured in the United Kingdom by Xcalibur Tooling, a company with over 45 years of experience in producing precision woodworking tools. Each blade undergoes strict quality control checks, including dimensional accuracy, hardness testing, and surface finish inspection, to ensure consistent performance and reliability in professional workshop environments.\u003c\/p\u003e","brand":"Xcalibur Tooling","offers":[{"title":"Default Title","offer_id":53178825933066,"sku":"410353-2","price":34.49,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/4195\/4570\/files\/01-Main_db6d1633-7647-40fd-9b30-64c1c276406c.jpg?v=1772792392"}],"url":"https:\/\/www.woodfordtooling.com\/en-de\/collections\/planer-blades-for-bernardo-machines.oembed","provider":"Woodford Woodworking Tooling Ltd.","version":"1.0","type":"link"}