Zu Inhalt springen
Sparen Sie 10 %, erhalten Sie kostenlose Lieferung in Großbritannien und ein kostenloses Geschenk im Wert von bis zu 13,49 £ – den ganzen September!
Sichern Sie sich noch heute 10 % Rabatt, kostenlosen Versand in Großbritannien und Ihr Gratisgeschenk – endet am 30. September
Record Power SABRE-250 Bandsaw Blade 1790mm (70 1/2") - Various Widths & TPI - Xcalibur Tooling

Record Power SABRE-250 Bandsaw Blade 1790mm (70 1/2") - Various Widths & TPI - Xcalibur Tooling

von Xcalibur Tooling
£14.65 - £15.49
£15.49
£14.65 - £15.49
£15.49

Sized specifically for the Record Power SABRE-250, this Xcalibur Tooling bandsaw blade measures 1790mm (70 1/2 inches) and is designed for woodworking, sheet materials, plastics, and general workshop cutting.

High-carbon steel construction is paired with precision-ground teeth and UK manufacture. Width choices from 6mm to 25mm and seven TPI options allow users to configure the blade for curved work, general sawing, ripping, resawing, or finer finishes.

Key Features

  • SABRE-250 Specific Length: The 1790mm (70 1/2-inch) blade is manufactured to match the specified length required by the Record Power SABRE-250 bandsaw.

  • Five Blade Widths: Choose from 6mm, 10mm, 13mm, 19mm, and 25mm widths to accommodate different cutting styles and workpiece requirements.

  • Seven TPI Choices: Available 3, 4, 6, 10, 14, 18, and 24 TPI options cover coarse, general-purpose, fine, and thin-material cutting.

  • Precision-Ground Tooth Form: Consistently ground teeth are optimised for wood and plastics, supporting efficient chip removal and controlled cutting across suitable materials.

  • Made in the UK: Xcalibur Tooling manufactures and precision-welds these blades in Cheshire, with the joint finished flush for smoother passage through the guides.

Applications

  • Cut curved furniture parts, patterns, and shaped hardwood or softwood components using the narrower 6mm blade where tighter turning is needed.

  • Prepare cabinet and joinery components from timber, MDF, or plywood using an appropriate width and tooth pitch for the material.

  • Choose lower 3–4 TPI configurations when working through thicker timber or carrying out faster rip-cutting operations.

  • Use 10–14 TPI blades for thinner stock, MDF, and plywood where a smoother edge and reduced tear-out are desirable.

  • Include the correct blade among wood shop tools and equipment used for furniture making, sheet processing, light resawing, and regular workshop preparation.

Why Choose Our Bandsaw Blade?

  • Five width options give SABRE-250 users greater freedom to select the blade around curve radius, straight-line stability, and the individual project.

  • A broad TPI range means tooth spacing can be matched more precisely to material thickness rather than using one configuration for every cut.

  • High-carbon steel combines a hardened cutting edge with blade flexibility, making the Record Power bandsaw blade suitable for varied woodworking applications.

  • Precision-ground teeth and a flush-finished welded joint are designed to promote smooth tracking while helping reduce unwanted vibration during operation.

  • Suitability for hardwood, softwood, MDF, plywood, plastics, and laminates gives workshops useful flexibility across timber and sheet-material projects.

FAQs

1. Will the 1790mm blade fit the Record Power SABRE-250?
Yes. This blade is manufactured to the 1790mm (70 1/2-inch) length specified for the Record Power SABRE-250. Before ordering, choose the width and TPI according to the type of material and cutting task involved.

2. Which blade width should I select for the SABRE-250?
The available widths are 6mm, 10mm, 13mm, 19mm, and 25mm. A 6mm blade suits tighter curves, while wider options provide progressively greater stability for general straight cutting and suitable resawing work.

3. Which TPI is appropriate for timber, MDF, or finer cutting?
Choose 3–4 TPI for thicker timber and faster ripping, or 6 TPI for balanced general woodworking. For thinner stock, MDF, and plywood requiring a smoother result, 10–14 TPI is generally more appropriate.

4. What materials can this SABRE-250 blade be used to cut?
With the appropriate width and tooth pitch, the blade can be used with hardwood, softwood, MDF, plywood, plastics, and laminates. Higher 18–24 TPI options are particularly relevant to plastics and very thin materials.

5. What should I check when installing and maintaining the blade?
Follow the SABRE-250 machine manual for correct tension and guide settings. Check tracking before cutting, keep the blade clear of excessive residue, and periodically inspect the teeth and welded joint for wear or visible damage.

SKU BS17901404-1