Zu Inhalt springen
Sparen Sie 10 %, erhalten Sie kostenlose Lieferung in Großbritannien und ein kostenloses Geschenk im Wert von bis zu 13,49 £ – den ganzen September!
Sichern Sie sich noch heute 10 % Rabatt, kostenlosen Versand in Großbritannien und Ihr Gratisgeschenk – endet am 30. September
Record Power RSBS12 Bandsaw Blade 2235mm (88")- Various Widths & TPI - Xcalibur Tooling

Record Power RSBS12 Bandsaw Blade 2235mm (88")- Various Widths & TPI - Xcalibur Tooling

von Xcalibur Tooling
£14.49 - £22.49
£14.49
£14.49 - £22.49
£14.49

Choosing the right replacement for an RSBS12 starts with the correct 2235mm (88-inch) blade length. This Xcalibur Tooling high-carbon steel blade is designed specifically for the Record Power RSBS12 bandsaw.

Rather than using one configuration for every job, woodworkers can select from various widths and TPI options to suit ripping, curved profiles, routine sawing, or finer-detail work. Each blade is precision-welded in the UK for dependable workshop use.

Key Features

  • 2235mm RSBS12 Sizing: The 2235mm (88-inch) length matches the blade specification stated for the Record Power RSBS12, helping users select the correct replacement.

  • High-Carbon Steel Construction: Flexible, sharp high-carbon steel provides the blade characteristics required for regular timber cutting across different woodworking projects and cutting directions.

  • UK Precision-Welded Blade: Every RSBS12 blade is precision-welded in the UK, creating the continuous blade loop needed for consistent bandsaw operation.

  • Width Options by Cutting Radius: Narrow 3–6mm, medium 10–13mm, and wider 19mm-plus choices support curves, general sawing, and straighter ripping work.

  • TPI Options by Cutting Requirement: Low, medium, and high tooth pitches allow users to prioritise cutting speed, everyday versatility, or a smoother finish.

Applications

  • Form tight curves and intricate wooden shapes with a narrow 3–6mm blade where improved turning ability is important.

  • Complete general workshop sawing with a 10–13mm blade when a practical balance between control and versatility is required.

  • Carry out longer straight passes and timber ripping with wider 19mm-plus blades that provide greater stability during directional cutting.

  • Use lower 4–6 TPI configurations for faster progress through hardwood or thicker stock where effective chip clearance is particularly useful.

  • Select higher tooth counts for thinner material and detail-focused woodworking where the priority shifts towards a cleaner, smoother finished edge.

Why Choose Our Bandsaw Blade?

  • The RSBS12-specific 2235mm measurement gives buyers a clearly defined replacement length before choosing the cutting configuration required for their project.

  • Three practical width groups make it easier to configure the same bandsaw for detailed curves, everyday sawing, or straighter ripping work.

  • Different TPI ranges allow tooth spacing to be matched more closely to stock thickness and the desired balance of speed and finish.

  • UK-made construction makes this blade a relevant choice alongside fine woodworking tools UK users rely on for controlled timber preparation and project work.

  • Xcalibur Tooling combines high-carbon steel with precision welding, providing hobbyists and professional craftspeople with a practical RSBS12 replacement in selectable configurations.

FAQs

1. Which blade length should I buy for a Record Power RSBS12?
The correct blade length stated for the Record Power RSBS12 is 2235mm, equivalent to 88 inches. Confirm that your machine is the RSBS12 model before selecting the blade width and TPI needed for your normal cutting work.

2. What blade width is suitable for curved, general, or straight cutting?
Choose a narrow 3–6mm blade for tight curves and intricate shapes, a medium 10–13mm blade for general cutting, or a wider 19mm-plus option for straighter cuts and ripping timber where extra stability is useful.

3. How do the available TPI options affect cutting performance?
Low 4–6 TPI configurations favour faster cutting through hardwood or thick timber. Medium 8–10 TPI is suited to general woodworking, while high 14-plus TPI options are intended for fine cuts and smoother finishes on thinner stock.

4. What material is the RSBS12 blade made from, and where is it manufactured?
The blade is made from high-carbon steel, described as flexible and sharp, and every RSBS12 blade is precision-welded in the UK. This construction supports woodworking tasks ranging from straight ripping to more intricate curve work.

5. What should I consider before fitting a replacement blade to the RSBS12?
Start by confirming the 2235mm blade length, then select a width and TPI appropriate for the job. During installation, follow the bandsaw manufacturer’s guidance for correct blade tension, tracking, guide positioning, and safe machine setup.

SKU