{"title":"Bandsaw Blades For Itech Machines","description":"","products":[{"product_id":"itech-bs600-bandsaw-blade-4470mm-176-various-widths-tpi-xcalibur-tooling","title":"Itech BS600 Bandsaw Blade 4470mm (176\") - Various Widths \u0026 TPI - Xcalibur Tooling","description":"\u003ch2\u003eItech BS600 Bandsaw Blade 4470mm – Precision-Engineered for UK Workshops\u003c\/h2\u003e\n\u003cp\u003eManufactured in the UK by\u003cspan\u003e \u003c\/span\u003e\u003cb\u003eXcalibur Tooling\u003c\/b\u003e, this 4470mm (176\") bandsaw blade is engineered specifically for the\u003cspan\u003e \u003c\/span\u003e\u003cb\u003eItech BS600\u003c\/b\u003e. Produced from high carbon steel, it is suitable for professional joinery shops, cabinet makers, and serious hobbyists looking for reliable performance in hardwood, softwood, MDF, plywood, and plastics. This blade is supplied in a 6mm width, ideal for tight curve work and general-purpose cutting, and is trusted by workshops across the UK for its consistency and longevity.\u003c\/p\u003e\n\u003cp\u003eEach blade is produced from\u003cspan\u003e \u003c\/span\u003e\u003cb\u003ehigh carbon steel (HCS)\u003c\/b\u003e, selected for its combination of flexibility and sharpness. The carbon content allows the blade to maintain a keen edge while providing fatigue resistance for extended service life. Teeth are precision-ground to a consistent geometry, with available TPI options (3, 4, 6, 10, 14, 18, 24) to suit a range of applications. For general woodwork, 6 TPI offers a balance of speed and finish; 3 to 4 TPI is suited to thick timber and fast rip cuts, while 10 to 14 TPI is recommended for smooth finishes in thin stock, plywood, and MDF. The tooth set and profile are optimised for clean chip removal and minimal burning, even in resinous or engineered woods.\u003c\/p\u003e\n\u003cp\u003eAll Xcalibur Tooling bandsaw blades are\u003cspan\u003e \u003c\/span\u003e\u003cb\u003eprecision-welded\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003eand ground in Cheshire. The weld joint is dressed flush to the blade body to eliminate bumps or clicks as the blade passes through the guides, reducing vibration and noise. Each blade is manufactured to strict dimensional tolerances for length, width, and thickness, ensuring correct tracking and tensioning on the Itech BS600. Consistency across batches is maintained through controlled processes, so every blade seats accurately and performs reliably. The 6mm width allows a minimum curve radius of approximately 13mm, 19mm, 25mm making it suitable for intricate work as well as straight cuts.\u003c\/p\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMachine Compatibility:\u003c\/strong\u003e\u003cspan\u003e Itech BS600\u003c\/span\u003e (176\" \/ 4470mm bandsaw)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlade Length:\u003c\/strong\u003e\u003cspan\u003e 4470\u003c\/span\u003emm (176\")\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlade Width:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e6mm (1\/4\"), 10mm (3\/8\"), 13mm (1\/2\"), 19mm (3\/4\"), 25mm (1\")\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eHigh Carbon Steel (HCS)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThickness:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eStandard for Itech BS600 (see machine manual for tension settings)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTeeth Per Inch (TPI):\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e3, 4, 6, 10, 14, 18, 24 (select as required)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTooth Form:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ePrecision-ground, optimised set for wood and plastics\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturing Origin:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eMade in the UK\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePack Size:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e1 blade\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eXcalibur Tooling\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eJoinery and cabinet making\u003c\/li\u003e\n\u003cli\u003eCurve cutting in hardwood and softwood\u003c\/li\u003e\n\u003cli\u003eGeneral-purpose workshop cutting\u003c\/li\u003e\n\u003cli\u003eSheet material processing (MDF, plywood)\u003c\/li\u003e\n\u003cli\u003ePlastic and laminate trimming\u003c\/li\u003e\n\u003cli\u003eFurniture and pattern making\u003c\/li\u003e\n\u003cli\u003eResawing thin timber (with appropriate TPI)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy Choose Xcalibur Tooling\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHigh carbon steel for flexibility and sharpness in wood applications\u003c\/li\u003e\n\u003cli\u003ePrecision-welded joint for smooth tracking and reduced vibration\u003c\/li\u003e\n\u003cli\u003eOver 45 years of UK manufacturing expertise\u003c\/li\u003e\n\u003cli\u003eTrusted by professionals and workshops across the UK\u003c\/li\u003e\n\u003cli\u003eQuality Guaranteed. Every blade batch is checked for weld and dimensional accuracy\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eShipping \u0026amp; Returns\u003c\/h3\u003e\n\u003cp\u003eAll orders are dispatched from Bramhall, Cheshire within 1-2 working days. Free standard delivery on all UK orders. Returns are accepted within 30 days. Item must be unused and in original packaging.\u003c\/p\u003e\n\u003ch3\u003ePayment\u003c\/h3\u003e\n\u003cp\u003ePayment is accepted via PayPal, credit card, or debit card through secure checkout. All prices include VAT where applicable.\u003c\/p\u003e\n\u003cp\u003eManufactured in the United Kingdom by Xcalibur Tooling. Over 45 years of manufacturing expertise. Quality Guaranteed. Trusted by Professionals.\u003c\/p\u003e\n\u003ch3\u003eFAQs\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Will this 4470mm bandsaw blade fit my Itech BS600?\u003c\/strong\u003e\u003cbr\u003eA: Yes, this blade is manufactured to the exact 4470mm (176\") length required for the Itech BS600. The 6mm width is suitable for both straight and curved work. Manufactured in the UK by Xcalibur Tooling, each blade is checked for length and weld accuracy before dispatch, so you can fit and tension the blade with confidence.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Which TPI should I choose for cutting hardwood, softwood, or MDF?\u003c\/strong\u003e\u003cbr\u003eA: For thick hardwood or fast rip cuts, select 3 or 4 TPI for aggressive chip clearance. For general purpose use in mixed timbers, 6 TPI provides a good balance of speed and surface finish. For fine work in thin stock, MDF, or plywood, 10 to 14 TPI produces a smoother finish and minimises tear-out. Higher TPI options (18 to 24) are best for plastics or very thin materials. Each blade is ground to a consistent tooth form for clean, accurate cuts.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: What are the advantages of high carbon steel (HCS) in bandsaw blades?\u003c\/strong\u003e\u003cbr\u003eA: High carbon steel offers a combination of flexibility and sharpness ideal for woodworking. The carbon content allows the teeth to be hardened for edge retention, while the blade back remains flexible to resist fatigue and cracking. This makes HCS blades suitable for frequent use on benchtop and floor-standing bandsaws, providing a long service life when used with correct tension and feed rates.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Is this bandsaw blade made in the UK?\u003c\/strong\u003e\u003cbr\u003eA: Yes, all Xcalibur Tooling bandsaw blades are manufactured and welded in Cheshire, England. The entire process, from material selection to precision welding and finishing, is controlled in-house to maintain consistent quality. Xcalibur Tooling has over 45 years of UK manufacturing expertise and is trusted by workshops across the country.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: How do I select the right width and TPI for curve cutting or resawing?\u003c\/strong\u003e\u003cbr\u003eA: A 6mm (1\/4 inch) blade is ideal for tight curve work, allowing a minimum radius of approximately 15mm. For general straight cuts or light resawing, wider blades (10 to 13mm) offer better tracking and stability. TPI selection depends on material thickness and finish required: lower TPI for thick timber and faster cuts, higher TPI for thin stock and smooth finishes. Always match the blade width and TPI to your intended application for best results.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: What is the manufacturing process for Xcalibur Tooling bandsaw blades?\u003c\/strong\u003e\u003cbr\u003eA: Xcalibur Tooling bandsaw blades are manufactured in the UK using high carbon steel strip, which is precision cut to length. The ends are joined using a precision welding process, then ground flush to ensure a smooth, vibration-free joint. Each blade is then heat-treated to optimise hardness and flexibility, followed by precision grinding of the teeth to ensure consistent geometry and sharpness. Every blade undergoes strict quality checks for weld integrity, dimensional accuracy, and tooth form before dispatch.\u003c\/p\u003e","brand":"Xcalibur Tooling","offers":[{"title":"6mm (1\/4\") \/ 04 TPI","offer_id":53374778933514,"sku":"BS44701404-1","price":15.63,"currency_code":"GBP","in_stock":true},{"title":"6mm (1\/4\") \/ 06 TPI","offer_id":53374778966282,"sku":"BS44701406-1","price":15.63,"currency_code":"GBP","in_stock":true},{"title":"6mm (1\/4\") \/ 10 TPI","offer_id":53374778999050,"sku":"BS44701410-1","price":15.63,"currency_code":"GBP","in_stock":true},{"title":"6mm (1\/4\") \/ 14 TPI","offer_id":53374779031818,"sku":"BS44701414-1","price":15.63,"currency_code":"GBP","in_stock":true},{"title":"6mm (1\/4\") \/ 24 TPI","offer_id":53374779064586,"sku":"BS44701424-1","price":15.63,"currency_code":"GBP","in_stock":true},{"title":"10mm (3\/8\") \/ 04 TPI","offer_id":53374779097354,"sku":"BS44703804-1","price":16.67,"currency_code":"GBP","in_stock":true},{"title":"10mm (3\/8\") \/ 06 TPI","offer_id":53374779130122,"sku":"BS44703806-1","price":16.67,"currency_code":"GBP","in_stock":true},{"title":"10mm (3\/8\") \/ 10 TPI","offer_id":53374779162890,"sku":"BS44703810-1","price":16.67,"currency_code":"GBP","in_stock":true},{"title":"10mm (3\/8\") \/ 14 TPI","offer_id":53374779195658,"sku":"BS44703814-1","price":16.67,"currency_code":"GBP","in_stock":true},{"title":"10mm (3\/8\") \/ 18 TPI","offer_id":53374779228426,"sku":"BS44703818-1","price":16.67,"currency_code":"GBP","in_stock":true},{"title":"13mm (1\/2\") \/ 04 TPI","offer_id":53374779261194,"sku":"BS44701204-1","price":17.57,"currency_code":"GBP","in_stock":true},{"title":"13mm (1\/2\") \/ 06 TPI","offer_id":53374779293962,"sku":"BS44701206-1","price":17.57,"currency_code":"GBP","in_stock":true},{"title":"13mm (1\/2\") \/ 10 TPI","offer_id":53374779326730,"sku":"BS44701210-1","price":17.57,"currency_code":"GBP","in_stock":true},{"title":"13mm (1\/2\") \/ 14 TPI","offer_id":53374779359498,"sku":"BS44701214-1","price":17.57,"currency_code":"GBP","in_stock":true},{"title":"13mm (1\/2\") \/ 24 TPI","offer_id":53374779392266,"sku":"BS44701224-1","price":17.57,"currency_code":"GBP","in_stock":true},{"title":"19mm (3\/4\") \/ 04 TPI","offer_id":53374779425034,"sku":"BS44703404-1","price":22.89,"currency_code":"GBP","in_stock":true},{"title":"19mm (3\/4\") \/ 06 TPI","offer_id":53374779457802,"sku":"BS44703406-1","price":22.89,"currency_code":"GBP","in_stock":true},{"title":"19mm (3\/4\") \/ 10 TPI","offer_id":53374779490570,"sku":"BS44703410-1","price":22.89,"currency_code":"GBP","in_stock":true},{"title":"19mm (3\/4\") \/ 03 TPI","offer_id":53374779523338,"sku":"BS44703403-1","price":22.89,"currency_code":"GBP","in_stock":true},{"title":"25mm (1\") \/ 06 TPI","offer_id":53374779556106,"sku":"BS44700106-1","price":26.42,"currency_code":"GBP","in_stock":true},{"title":"25mm (1\") \/ 10 TPI","offer_id":53374779588874,"sku":"BS44700110-1","price":26.42,"currency_code":"GBP","in_stock":true},{"title":"25mm (1\") \/ 03 TPI","offer_id":53374779621642,"sku":"BS44700103-1","price":26.42,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/4195\/4570\/files\/01_Bandsaw_Blades_Main.jpg?v=1779357788"},{"product_id":"itech-bs300-bandsaw-blade-2240mm-88-1-4-various-widths-tpi-xcalibur-tooling","title":"Itech BS300 Bandsaw Blade 2240mm (88 1\/4\") - Various Widths \u0026 TPI - Xcalibur Tooling","description":"\u003ch2\u003eItech BS300 Bandsaw Blade 2240mm – Precision-Engineered for UK Workshops\u003c\/h2\u003e\n\u003cp\u003eManufactured in the UK by\u003cspan\u003e \u003c\/span\u003e\u003cb\u003eXcalibur Tooling\u003c\/b\u003e, this 2240mm (88 1\/4\") bandsaw blade is engineered specifically for the\u003cspan\u003e \u003c\/span\u003e\u003cb\u003eItech BS300\u003c\/b\u003e. Produced from high carbon steel, it is suitable for professional joinery shops, cabinet makers, and serious hobbyists looking for reliable performance in hardwood, softwood, MDF, plywood, and plastics. This blade is supplied in a 6mm width, ideal for tight curve work and general-purpose cutting, and is trusted by workshops across the UK for its consistency and longevity.\u003c\/p\u003e\n\u003cp\u003eEach blade is produced from\u003cspan\u003e \u003c\/span\u003e\u003cb\u003ehigh carbon steel (HCS)\u003c\/b\u003e, selected for its combination of flexibility and sharpness. The carbon content allows the blade to maintain a keen edge while providing fatigue resistance for extended service life. Teeth are precision-ground to a consistent geometry, with available TPI options (3, 4, 6, 10, 14, 18, 24) to suit a range of applications. For general woodwork, 6 TPI offers a balance of speed and finish; 3 to 4 TPI is suited to thick timber and fast rip cuts, while 10 to 14 TPI is recommended for smooth finishes in thin stock, plywood, and MDF. The tooth set and profile are optimised for clean chip removal and minimal burning, even in resinous or engineered woods.\u003c\/p\u003e\n\u003cp\u003eAll Xcalibur Tooling bandsaw blades are\u003cspan\u003e \u003c\/span\u003e\u003cb\u003eprecision-welded\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003eand ground in Cheshire. The weld joint is dressed flush to the blade body to eliminate bumps or clicks as the blade passes through the guides, reducing vibration and noise. Each blade is manufactured to strict dimensional tolerances for length, width, and thickness, ensuring correct tracking and tensioning on the Itech BS300. Consistency across batches is maintained through controlled processes, so every blade seats accurately and performs reliably. The 6mm width allows a minimum curve radius of approximately 13mm, 19mm, 25mm making it suitable for intricate work as well as straight cuts.\u003c\/p\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMachine Compatibility:\u003c\/strong\u003e\u003cspan\u003e Itech BS300\u003c\/span\u003e (88 1\/4\" \/ 2240mm bandsaw)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlade Length:\u003c\/strong\u003e\u003cspan\u003e 2240\u003c\/span\u003emm (88 1\/4\")\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlade Width:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e6mm (1\/4\"), 10mm (3\/8\"), 13mm (1\/2\"), 19mm (3\/4\"), 25mm (1\")\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eHigh Carbon Steel (HCS)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThickness:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eStandard for Itech BS300 (see machine manual for tension settings)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTeeth Per Inch (TPI):\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e3, 4, 6, 10, 14, 18, 24 (select as required)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTooth Form:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ePrecision-ground, optimised set for wood and plastics\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturing Origin:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eMade in the UK\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePack Size:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e1 blade\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eXcalibur Tooling\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eJoinery and cabinet making\u003c\/li\u003e\n\u003cli\u003eCurve cutting in hardwood and softwood\u003c\/li\u003e\n\u003cli\u003eGeneral-purpose workshop cutting\u003c\/li\u003e\n\u003cli\u003eSheet material processing (MDF, plywood)\u003c\/li\u003e\n\u003cli\u003ePlastic and laminate trimming\u003c\/li\u003e\n\u003cli\u003eFurniture and pattern making\u003c\/li\u003e\n\u003cli\u003eResawing thin timber (with appropriate TPI)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy Choose Xcalibur Tooling\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHigh carbon steel for flexibility and sharpness in wood applications\u003c\/li\u003e\n\u003cli\u003ePrecision-welded joint for smooth tracking and reduced vibration\u003c\/li\u003e\n\u003cli\u003eOver 45 years of UK manufacturing expertise\u003c\/li\u003e\n\u003cli\u003eTrusted by professionals and workshops across the UK\u003c\/li\u003e\n\u003cli\u003eQuality Guaranteed. Every blade batch is checked for weld and dimensional accuracy\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eShipping \u0026amp; Returns\u003c\/h3\u003e\n\u003cp\u003eAll orders are dispatched from Bramhall, Cheshire within 1-2 working days. Free standard delivery on all UK orders. Returns are accepted within 30 days. Item must be unused and in original packaging.\u003c\/p\u003e\n\u003ch3\u003ePayment\u003c\/h3\u003e\n\u003cp\u003ePayment is accepted via PayPal, credit card, or debit card through secure checkout. All prices include VAT where applicable.\u003c\/p\u003e\n\u003cp\u003eManufactured in the United Kingdom by Xcalibur Tooling. Over 45 years of manufacturing expertise. Quality Guaranteed. Trusted by Professionals.\u003c\/p\u003e\n\u003ch3\u003eFAQs\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Will this 2240mm bandsaw blade fit my Itech BS300?\u003c\/strong\u003e\u003cbr\u003eA: Yes, this blade is manufactured to the exact 2240mm (88 1\/4\") length required for the Itech BS300. The 6mm width is suitable for both straight and curved work. Manufactured in the UK by Xcalibur Tooling, each blade is checked for length and weld accuracy before dispatch, so you can fit and tension the blade with confidence.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Which TPI should I choose for cutting hardwood, softwood, or MDF?\u003c\/strong\u003e\u003cbr\u003eA: For thick hardwood or fast rip cuts, select 3 or 4 TPI for aggressive chip clearance. For general purpose use in mixed timbers, 6 TPI provides a good balance of speed and surface finish. For fine work in thin stock, MDF, or plywood, 10 to 14 TPI produces a smoother finish and minimises tear-out. Higher TPI options (18 to 24) are best for plastics or very thin materials. Each blade is ground to a consistent tooth form for clean, accurate cuts.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: What are the advantages of high carbon steel (HCS) in bandsaw blades?\u003c\/strong\u003e\u003cbr\u003eA: High carbon steel offers a combination of flexibility and sharpness ideal for woodworking. The carbon content allows the teeth to be hardened for edge retention, while the blade back remains flexible to resist fatigue and cracking. This makes HCS blades suitable for frequent use on benchtop and floor-standing bandsaws, providing a long service life when used with correct tension and feed rates.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Is this bandsaw blade made in the UK?\u003c\/strong\u003e\u003cbr\u003eA: Yes, all Xcalibur Tooling bandsaw blades are manufactured and welded in Cheshire, England. The entire process, from material selection to precision welding and finishing, is controlled in-house to maintain consistent quality. Xcalibur Tooling has over 45 years of UK manufacturing expertise and is trusted by workshops across the country.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: How do I select the right width and TPI for curve cutting or resawing?\u003c\/strong\u003e\u003cbr\u003eA: A 6mm (1\/4 inch) blade is ideal for tight curve work, allowing a minimum radius of approximately 15mm. For general straight cuts or light resawing, wider blades (10 to 13mm) offer better tracking and stability. TPI selection depends on material thickness and finish required: lower TPI for thick timber and faster cuts, higher TPI for thin stock and smooth finishes. Always match the blade width and TPI to your intended application for best results.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: What is the manufacturing process for Xcalibur Tooling bandsaw blades?\u003c\/strong\u003e\u003cbr\u003eA: Xcalibur Tooling bandsaw blades are manufactured in the UK using high carbon steel strip, which is precision cut to length. The ends are joined using a precision welding process, then ground flush to ensure a smooth, vibration-free joint. Each blade is then heat-treated to optimise hardness and flexibility, followed by precision grinding of the teeth to ensure consistent geometry and sharpness. Every blade undergoes strict quality checks for weld integrity, dimensional accuracy, and tooth form before dispatch.\u003c\/p\u003e","brand":"Xcalibur Tooling","offers":[{"title":"6mm (1\/4\") \/ 04 TPI","offer_id":53374819467530,"sku":"BS22401404-1","price":11.26,"currency_code":"GBP","in_stock":true},{"title":"6mm (1\/4\") \/ 06 TPI","offer_id":53374819500298,"sku":"BS22401406-1","price":11.26,"currency_code":"GBP","in_stock":true},{"title":"6mm (1\/4\") \/ 10 TPI","offer_id":53374819533066,"sku":"BS22401410-1","price":11.26,"currency_code":"GBP","in_stock":true},{"title":"6mm (1\/4\") \/ 14 TPI","offer_id":53374819565834,"sku":"BS22401414-1","price":11.26,"currency_code":"GBP","in_stock":true},{"title":"6mm (1\/4\") \/ 24 TPI","offer_id":53374819598602,"sku":"BS22401424-1","price":11.26,"currency_code":"GBP","in_stock":true},{"title":"10mm (3\/8\") \/ 04 TPI","offer_id":53374819631370,"sku":"BS22403804-1","price":12.47,"currency_code":"GBP","in_stock":true},{"title":"10mm (3\/8\") \/ 06 TPI","offer_id":53374819664138,"sku":"BS22403806-1","price":12.47,"currency_code":"GBP","in_stock":true},{"title":"10mm (3\/8\") \/ 10 TPI","offer_id":53374819696906,"sku":"BS22403810-1","price":12.47,"currency_code":"GBP","in_stock":true},{"title":"10mm (3\/8\") \/ 14 TPI","offer_id":53374819729674,"sku":"BS22403814-1","price":12.47,"currency_code":"GBP","in_stock":true},{"title":"10mm (3\/8\") \/ 18 TPI","offer_id":53374819762442,"sku":"BS22403818-1","price":12.47,"currency_code":"GBP","in_stock":true},{"title":"13mm (1\/2\") \/ 04 TPI","offer_id":53374819795210,"sku":"BS22401204-1","price":12.89,"currency_code":"GBP","in_stock":true},{"title":"13mm (1\/2\") \/ 06 TPI","offer_id":53374819827978,"sku":"BS22401206-1","price":12.89,"currency_code":"GBP","in_stock":true},{"title":"13mm (1\/2\") \/ 10 TPI","offer_id":53374819860746,"sku":"BS22401210-1","price":12.89,"currency_code":"GBP","in_stock":true},{"title":"13mm (1\/2\") \/ 14 TPI","offer_id":53374819893514,"sku":"BS22401214-1","price":12.89,"currency_code":"GBP","in_stock":true},{"title":"13mm (1\/2\") \/ 24 TPI","offer_id":53374819926282,"sku":"BS22401224-1","price":12.89,"currency_code":"GBP","in_stock":true},{"title":"19mm (3\/4\") \/ 04 TPI","offer_id":53374819959050,"sku":"BS22403404-1","price":17.16,"currency_code":"GBP","in_stock":true},{"title":"19mm (3\/4\") \/ 06 TPI","offer_id":53374819991818,"sku":"BS22403406-1","price":17.16,"currency_code":"GBP","in_stock":true},{"title":"19mm (3\/4\") \/ 10 TPI","offer_id":53374820024586,"sku":"BS22403410-1","price":17.16,"currency_code":"GBP","in_stock":true},{"title":"19mm (3\/4\") \/ 03 TPI","offer_id":53374820057354,"sku":"BS22403403-1","price":17.16,"currency_code":"GBP","in_stock":true},{"title":"25mm (1\") \/ 06 TPI","offer_id":53374820090122,"sku":"BS22400106-1","price":18.8,"currency_code":"GBP","in_stock":true},{"title":"25mm (1\") \/ 10 TPI","offer_id":53374820122890,"sku":"BS22400110-1","price":18.8,"currency_code":"GBP","in_stock":true},{"title":"25mm (1\") \/ 03 TPI","offer_id":53374820155658,"sku":"BS22400103-1","price":18.8,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/4195\/4570\/files\/01_Bandsaw_Blades_Main.jpg?v=1779357788"},{"product_id":"itech-bs400-bandsaw-blade-3531mm-139-various-widths-tpi-xcalibur-tooling","title":"Itech BS400 Bandsaw Blade 3531mm (139\") - Various Widths \u0026 TPI - Xcalibur Tooling","description":"\u003ch2\u003eItech BS400 Bandsaw Blade 3531mm – Precision-Engineered for UK Workshops\u003c\/h2\u003e\n\u003cp\u003eManufactured in the UK by\u003cspan\u003e \u003c\/span\u003e\u003cb\u003eXcalibur Tooling\u003c\/b\u003e, this 3531mm (139\") bandsaw blade is engineered specifically for the\u003cspan\u003e \u003c\/span\u003e\u003cb\u003eItech BS400\u003c\/b\u003e. Produced from high carbon steel, it is suitable for professional joinery shops, cabinet makers, and serious hobbyists looking for reliable performance in hardwood, softwood, MDF, plywood, and plastics. This blade is supplied in a 6mm width, ideal for tight curve work and general-purpose cutting, and is trusted by workshops across the UK for its consistency and longevity.\u003c\/p\u003e\n\u003cp\u003eEach blade is produced from\u003cspan\u003e \u003c\/span\u003e\u003cb\u003ehigh carbon steel (HCS)\u003c\/b\u003e, selected for its combination of flexibility and sharpness. The carbon content allows the blade to maintain a keen edge while providing fatigue resistance for extended service life. Teeth are precision-ground to a consistent geometry, with available TPI options (3, 4, 6, 10, 14, 18, 24) to suit a range of applications. For general woodwork, 6 TPI offers a balance of speed and finish; 3 to 4 TPI is suited to thick timber and fast rip cuts, while 10 to 14 TPI is recommended for smooth finishes in thin stock, plywood, and MDF. The tooth set and profile are optimised for clean chip removal and minimal burning, even in resinous or engineered woods.\u003c\/p\u003e\n\u003cp\u003eAll Xcalibur Tooling bandsaw blades are\u003cspan\u003e \u003c\/span\u003e\u003cb\u003eprecision-welded\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003eand ground in Cheshire. The weld joint is dressed flush to the blade body to eliminate bumps or clicks as the blade passes through the guides, reducing vibration and noise. Each blade is manufactured to strict dimensional tolerances for length, width, and thickness, ensuring correct tracking and tensioning on the Itech BS400. Consistency across batches is maintained through controlled processes, so every blade seats accurately and performs reliably. The 6mm width allows a minimum curve radius of approximately 13mm, 19mm, 25mm making it suitable for intricate work as well as straight cuts.\u003c\/p\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMachine Compatibility:\u003c\/strong\u003e\u003cspan\u003e Itech BS400\u003c\/span\u003e (139\" \/ 3531mm bandsaw)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlade Length:\u003c\/strong\u003e\u003cspan\u003e 3531mm (139\")\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlade Width:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e6mm (1\/4\"), 10mm (3\/8\"), 13mm (1\/2\"), 19mm (3\/4\"), 25mm (1\")\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eHigh Carbon Steel (HCS)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThickness:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eStandard for Itech BS400 (see machine manual for tension settings)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTeeth Per Inch (TPI):\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e3, 4, 6, 10, 14, 18, 24 (select as required)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTooth Form:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ePrecision-ground, optimised set for wood and plastics\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturing Origin:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eMade in the UK\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePack Size:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e1 blade\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eXcalibur Tooling\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eJoinery and cabinet making\u003c\/li\u003e\n\u003cli\u003eCurve cutting in hardwood and softwood\u003c\/li\u003e\n\u003cli\u003eGeneral-purpose workshop cutting\u003c\/li\u003e\n\u003cli\u003eSheet material processing (MDF, plywood)\u003c\/li\u003e\n\u003cli\u003ePlastic and laminate trimming\u003c\/li\u003e\n\u003cli\u003eFurniture and pattern making\u003c\/li\u003e\n\u003cli\u003eResawing thin timber (with appropriate TPI)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy Choose Xcalibur Tooling\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHigh carbon steel for flexibility and sharpness in wood applications\u003c\/li\u003e\n\u003cli\u003ePrecision-welded joint for smooth tracking and reduced vibration\u003c\/li\u003e\n\u003cli\u003eOver 45 years of UK manufacturing expertise\u003c\/li\u003e\n\u003cli\u003eTrusted by professionals and workshops across the UK\u003c\/li\u003e\n\u003cli\u003eQuality Guaranteed. Every blade batch is checked for weld and dimensional accuracy\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eShipping \u0026amp; Returns\u003c\/h3\u003e\n\u003cp\u003eAll orders are dispatched from Bramhall, Cheshire within 1-2 working days. Free standard delivery on all UK orders. Returns are accepted within 30 days. Item must be unused and in original packaging.\u003c\/p\u003e\n\u003ch3\u003ePayment\u003c\/h3\u003e\n\u003cp\u003ePayment is accepted via PayPal, credit card, or debit card through secure checkout. All prices include VAT where applicable.\u003c\/p\u003e\n\u003cp\u003eManufactured in the United Kingdom by Xcalibur Tooling. Over 45 years of manufacturing expertise. Quality Guaranteed. Trusted by Professionals.\u003c\/p\u003e\n\u003ch3\u003eFAQs\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Will this 3531mm bandsaw blade fit my Itech BS400?\u003c\/strong\u003e\u003cbr\u003eA: Yes, this blade is manufactured to the exact 3531mm (139\") length required for the Itech BS400. The 6mm width is suitable for both straight and curved work. Manufactured in the UK by Xcalibur Tooling, each blade is checked for length and weld accuracy before dispatch, so you can fit and tension the blade with confidence.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Which TPI should I choose for cutting hardwood, softwood, or MDF?\u003c\/strong\u003e\u003cbr\u003eA: For thick hardwood or fast rip cuts, select 3 or 4 TPI for aggressive chip clearance. For general purpose use in mixed timbers, 6 TPI provides a good balance of speed and surface finish. For fine work in thin stock, MDF, or plywood, 10 to 14 TPI produces a smoother finish and minimises tear-out. Higher TPI options (18 to 24) are best for plastics or very thin materials. Each blade is ground to a consistent tooth form for clean, accurate cuts.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: What are the advantages of high carbon steel (HCS) in bandsaw blades?\u003c\/strong\u003e\u003cbr\u003eA: High carbon steel offers a combination of flexibility and sharpness ideal for woodworking. The carbon content allows the teeth to be hardened for edge retention, while the blade back remains flexible to resist fatigue and cracking. This makes HCS blades suitable for frequent use on benchtop and floor-standing bandsaws, providing a long service life when used with correct tension and feed rates.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Is this bandsaw blade made in the UK?\u003c\/strong\u003e\u003cbr\u003eA: Yes, all Xcalibur Tooling bandsaw blades are manufactured and welded in Cheshire, England. The entire process, from material selection to precision welding and finishing, is controlled in-house to maintain consistent quality. Xcalibur Tooling has over 45 years of UK manufacturing expertise and is trusted by workshops across the country.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: How do I select the right width and TPI for curve cutting or resawing?\u003c\/strong\u003e\u003cbr\u003eA: A 6mm (1\/4 inch) blade is ideal for tight curve work, allowing a minimum radius of approximately 15mm. For general straight cuts or light resawing, wider blades (10 to 13mm) offer better tracking and stability. TPI selection depends on material thickness and finish required: lower TPI for thick timber and faster cuts, higher TPI for thin stock and smooth finishes. Always match the blade width and TPI to your intended application for best results.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: What is the manufacturing process for Xcalibur Tooling bandsaw blades?\u003c\/strong\u003e\u003cbr\u003eA: Xcalibur Tooling bandsaw blades are manufactured in the UK using high carbon steel strip, which is precision cut to length. The ends are joined using a precision welding process, then ground flush to ensure a smooth, vibration-free joint. Each blade is then heat-treated to optimise hardness and flexibility, followed by precision grinding of the teeth to ensure consistent geometry and sharpness. Every blade undergoes strict quality checks for weld integrity, dimensional accuracy, and tooth form before dispatch.\u003c\/p\u003e","brand":"Xcalibur Tooling","offers":[{"title":"6mm (1\/4\") \/ 04 TPI","offer_id":53375105597706,"sku":"BS35311404-1","price":14.07,"currency_code":"GBP","in_stock":true},{"title":"6mm (1\/4\") \/ 06 TPI","offer_id":53375105630474,"sku":"BS35311406-1","price":14.07,"currency_code":"GBP","in_stock":true},{"title":"6mm (1\/4\") \/ 10 TPI","offer_id":53375105663242,"sku":"BS35311410-1","price":14.07,"currency_code":"GBP","in_stock":true},{"title":"6mm (1\/4\") \/ 14 TPI","offer_id":53375105696010,"sku":"BS35311414-1","price":14.07,"currency_code":"GBP","in_stock":true},{"title":"6mm (1\/4\") \/ 24 TPI","offer_id":53375105728778,"sku":"BS35311424-1","price":14.07,"currency_code":"GBP","in_stock":true},{"title":"10mm (3\/8\") \/ 04 TPI","offer_id":53375105761546,"sku":"BS35313804-1","price":14.91,"currency_code":"GBP","in_stock":true},{"title":"10mm (3\/8\") \/ 06 TPI","offer_id":53375105794314,"sku":"BS35313806-1","price":14.91,"currency_code":"GBP","in_stock":true},{"title":"10mm (3\/8\") \/ 10 TPI","offer_id":53375105827082,"sku":"BS35313810-1","price":14.91,"currency_code":"GBP","in_stock":true},{"title":"10mm (3\/8\") \/ 14 TPI","offer_id":53375105859850,"sku":"BS35313814-1","price":14.91,"currency_code":"GBP","in_stock":true},{"title":"10mm (3\/8\") \/ 18 TPI","offer_id":53375105892618,"sku":"BS35313818-1","price":14.91,"currency_code":"GBP","in_stock":true},{"title":"13mm (1\/2\") \/ 04 TPI","offer_id":53375105925386,"sku":"BS35311204-1","price":15.58,"currency_code":"GBP","in_stock":true},{"title":"13mm (1\/2\") \/ 06 TPI","offer_id":53375105958154,"sku":"BS35311206-1","price":15.58,"currency_code":"GBP","in_stock":true},{"title":"13mm (1\/2\") \/ 10 TPI","offer_id":53375105990922,"sku":"BS35311210-1","price":15.58,"currency_code":"GBP","in_stock":true},{"title":"13mm (1\/2\") \/ 14 TPI","offer_id":53375106023690,"sku":"BS35311214-1","price":15.58,"currency_code":"GBP","in_stock":true},{"title":"13mm (1\/2\") \/ 24 TPI","offer_id":53375106056458,"sku":"BS35311224-1","price":15.58,"currency_code":"GBP","in_stock":true},{"title":"19mm (3\/4\") \/ 04 TPI","offer_id":53375106089226,"sku":"BS35313404-1","price":20.58,"currency_code":"GBP","in_stock":true},{"title":"19mm (3\/4\") \/ 06 TPI","offer_id":53375106121994,"sku":"BS35313406-1","price":20.58,"currency_code":"GBP","in_stock":true},{"title":"19mm (3\/4\") \/ 10 TPI","offer_id":53375106154762,"sku":"BS35313410-1","price":20.58,"currency_code":"GBP","in_stock":true},{"title":"19mm (3\/4\") \/ 03 TPI","offer_id":53375106187530,"sku":"BS35313403-1","price":20.58,"currency_code":"GBP","in_stock":true},{"title":"25mm (1\") \/ 06 TPI","offer_id":53375106220298,"sku":"BS35310106-1","price":22.79,"currency_code":"GBP","in_stock":true},{"title":"25mm (1\") \/ 10 TPI","offer_id":53375106253066,"sku":"BS35310110-1","price":22.79,"currency_code":"GBP","in_stock":true},{"title":"25mm (1\") \/ 03 TPI","offer_id":53375106285834,"sku":"BS35310103-1","price":22.79,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/4195\/4570\/files\/01_Bandsaw_Blades_Main.jpg?v=1779357788"},{"product_id":"itech-bs500-bandsaw-blade-3962mm-156-various-widths-tpi-xcalibur-tooling","title":"Itech BS500 Bandsaw Blade 3962mm (156\") - Various Widths \u0026 TPI - Xcalibur Tooling","description":"\u003ch2\u003eItech BS500 Bandsaw Blade 3962mm – Precision-Engineered for UK Workshops\u003c\/h2\u003e\n\u003cp\u003eManufactured in the UK by\u003cspan\u003e \u003c\/span\u003e\u003cb\u003eXcalibur Tooling\u003c\/b\u003e, this 3962mm (156\")bandsaw blade is engineered specifically for the\u003cspan\u003e \u003c\/span\u003e\u003cb\u003eItech BS500\u003c\/b\u003e. Produced from high carbon steel, it is suitable for professional joinery shops, cabinet makers, and serious hobbyists looking for reliable performance in hardwood, softwood, MDF, plywood, and plastics. This blade is supplied in a 6mm width, ideal for tight curve work and general-purpose cutting, and is trusted by workshops across the UK for its consistency and longevity.\u003c\/p\u003e\n\u003cp\u003eEach blade is produced from\u003cspan\u003e \u003c\/span\u003e\u003cb\u003ehigh carbon steel (HCS)\u003c\/b\u003e, selected for its combination of flexibility and sharpness. The carbon content allows the blade to maintain a keen edge while providing fatigue resistance for extended service life. Teeth are precision-ground to a consistent geometry, with available TPI options (3, 4, 6, 10, 14, 18, 24) to suit a range of applications. For general woodwork, 6 TPI offers a balance of speed and finish; 3 to 4 TPI is suited to thick timber and fast rip cuts, while 10 to 14 TPI is recommended for smooth finishes in thin stock, plywood, and MDF. The tooth set and profile are optimised for clean chip removal and minimal burning, even in resinous or engineered woods.\u003c\/p\u003e\n\u003cp\u003eAll Xcalibur Tooling bandsaw blades are\u003cspan\u003e \u003c\/span\u003e\u003cb\u003eprecision-welded\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003eand ground in Cheshire. The weld joint is dressed flush to the blade body to eliminate bumps or clicks as the blade passes through the guides, reducing vibration and noise. Each blade is manufactured to strict dimensional tolerances for length, width, and thickness, ensuring correct tracking and tensioning on the Itech BS500. Consistency across batches is maintained through controlled processes, so every blade seats accurately and performs reliably. The 6mm width allows a minimum curve radius of approximately 13mm, 19mm, 25mm making it suitable for intricate work as well as straight cuts.\u003c\/p\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMachine Compatibility:\u003c\/strong\u003e\u003cspan\u003e Itech BS500\u003c\/span\u003e (156\" \/ 3962mm bandsaw)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlade Length:\u003c\/strong\u003e\u003cspan\u003e 3962mm (156\")\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlade Width:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e6mm (1\/4\"), 10mm (3\/8\"), 13mm (1\/2\"), 19mm (3\/4\"), 25mm (1\")\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eHigh Carbon Steel (HCS)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThickness:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eStandard for Itech BS500 (see machine manual for tension settings)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTeeth Per Inch (TPI):\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e3, 4, 6, 10, 14, 18, 24 (select as required)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTooth Form:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ePrecision-ground, optimised set for wood and plastics\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturing Origin:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eMade in the UK\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePack Size:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e1 blade\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eXcalibur Tooling\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eJoinery and cabinet making\u003c\/li\u003e\n\u003cli\u003eCurve cutting in hardwood and softwood\u003c\/li\u003e\n\u003cli\u003eGeneral-purpose workshop cutting\u003c\/li\u003e\n\u003cli\u003eSheet material processing (MDF, plywood)\u003c\/li\u003e\n\u003cli\u003ePlastic and laminate trimming\u003c\/li\u003e\n\u003cli\u003eFurniture and pattern making\u003c\/li\u003e\n\u003cli\u003eResawing thin timber (with appropriate TPI)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy Choose Xcalibur Tooling\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHigh carbon steel for flexibility and sharpness in wood applications\u003c\/li\u003e\n\u003cli\u003ePrecision-welded joint for smooth tracking and reduced vibration\u003c\/li\u003e\n\u003cli\u003eOver 45 years of UK manufacturing expertise\u003c\/li\u003e\n\u003cli\u003eTrusted by professionals and workshops across the UK\u003c\/li\u003e\n\u003cli\u003eQuality Guaranteed. Every blade batch is checked for weld and dimensional accuracy\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eShipping \u0026amp; Returns\u003c\/h3\u003e\n\u003cp\u003eAll orders are dispatched from Bramhall, Cheshire within 1-2 working days. Free standard delivery on all UK orders. Returns are accepted within 30 days. Item must be unused and in original packaging.\u003c\/p\u003e\n\u003ch3\u003ePayment\u003c\/h3\u003e\n\u003cp\u003ePayment is accepted via PayPal, credit card, or debit card through secure checkout. All prices include VAT where applicable.\u003c\/p\u003e\n\u003cp\u003eManufactured in the United Kingdom by Xcalibur Tooling. Over 45 years of manufacturing expertise. Quality Guaranteed. Trusted by Professionals.\u003c\/p\u003e\n\u003ch3\u003eFAQs\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Will this 3962mm bandsaw blade fit my Itech BS500?\u003c\/strong\u003e\u003cbr\u003eA: Yes, this blade is manufactured to the exact 3962mm (156\") length required for the Itech BS500. The 6mm width is suitable for both straight and curved work. Manufactured in the UK by Xcalibur Tooling, each blade is checked for length and weld accuracy before dispatch, so you can fit and tension the blade with confidence.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Which TPI should I choose for cutting hardwood, softwood, or MDF?\u003c\/strong\u003e\u003cbr\u003eA: For thick hardwood or fast rip cuts, select 3 or 4 TPI for aggressive chip clearance. For general purpose use in mixed timbers, 6 TPI provides a good balance of speed and surface finish. For fine work in thin stock, MDF, or plywood, 10 to 14 TPI produces a smoother finish and minimises tear-out. Higher TPI options (18 to 24) are best for plastics or very thin materials. Each blade is ground to a consistent tooth form for clean, accurate cuts.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: What are the advantages of high carbon steel (HCS) in bandsaw blades?\u003c\/strong\u003e\u003cbr\u003eA: High carbon steel offers a combination of flexibility and sharpness ideal for woodworking. The carbon content allows the teeth to be hardened for edge retention, while the blade back remains flexible to resist fatigue and cracking. This makes HCS blades suitable for frequent use on benchtop and floor-standing bandsaws, providing a long service life when used with correct tension and feed rates.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Is this bandsaw blade made in the UK?\u003c\/strong\u003e\u003cbr\u003eA: Yes, all Xcalibur Tooling bandsaw blades are manufactured and welded in Cheshire, England. The entire process, from material selection to precision welding and finishing, is controlled in-house to maintain consistent quality. Xcalibur Tooling has over 45 years of UK manufacturing expertise and is trusted by workshops across the country.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: How do I select the right width and TPI for curve cutting or resawing?\u003c\/strong\u003e\u003cbr\u003eA: A 6mm (1\/4 inch) blade is ideal for tight curve work, allowing a minimum radius of approximately 15mm. For general straight cuts or light resawing, wider blades (10 to 13mm) offer better tracking and stability. TPI selection depends on material thickness and finish required: lower TPI for thick timber and faster cuts, higher TPI for thin stock and smooth finishes. Always match the blade width and TPI to your intended application for best results.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: What is the manufacturing process for Xcalibur Tooling bandsaw blades?\u003c\/strong\u003e\u003cbr\u003eA: Xcalibur Tooling bandsaw blades are manufactured in the UK using high carbon steel strip, which is precision cut to length. The ends are joined using a precision welding process, then ground flush to ensure a smooth, vibration-free joint. Each blade is then heat-treated to optimise hardness and flexibility, followed by precision grinding of the teeth to ensure consistent geometry and sharpness. Every blade undergoes strict quality checks for weld integrity, dimensional accuracy, and tooth form before dispatch.\u003c\/p\u003e","brand":"Xcalibur Tooling","offers":[{"title":"6mm (1\/4\") \/ 04 TPI","offer_id":53375178113290,"sku":"BS39621404-1","price":14.79,"currency_code":"GBP","in_stock":true},{"title":"6mm (1\/4\") \/ 06 TPI","offer_id":53375178146058,"sku":"BS39621406-1","price":14.79,"currency_code":"GBP","in_stock":true},{"title":"6mm (1\/4\") \/ 10 TPI","offer_id":53375178178826,"sku":"BS39621410-1","price":14.79,"currency_code":"GBP","in_stock":true},{"title":"6mm (1\/4\") \/ 14 TPI","offer_id":53375178211594,"sku":"BS39621414-1","price":14.79,"currency_code":"GBP","in_stock":true},{"title":"6mm (1\/4\") \/ 24 TPI","offer_id":53375178244362,"sku":"BS39621424-1","price":14.79,"currency_code":"GBP","in_stock":true},{"title":"10mm (3\/8\") \/ 04 TPI","offer_id":53375178277130,"sku":"BS39623804-1","price":15.72,"currency_code":"GBP","in_stock":true},{"title":"10mm (3\/8\") \/ 06 TPI","offer_id":53375178309898,"sku":"BS39623806-1","price":15.72,"currency_code":"GBP","in_stock":true},{"title":"10mm (3\/8\") \/ 10 TPI","offer_id":53375178342666,"sku":"BS39623810-1","price":15.72,"currency_code":"GBP","in_stock":true},{"title":"10mm (3\/8\") \/ 14 TPI","offer_id":53375178375434,"sku":"BS39623814-1","price":15.72,"currency_code":"GBP","in_stock":true},{"title":"10mm (3\/8\") \/ 18 TPI","offer_id":53375178408202,"sku":"BS39623818-1","price":15.72,"currency_code":"GBP","in_stock":true},{"title":"13mm (1\/2\") \/ 04 TPI","offer_id":53375178440970,"sku":"BS39621204-1","price":16.47,"currency_code":"GBP","in_stock":true},{"title":"13mm (1\/2\") \/ 06 TPI","offer_id":53375178473738,"sku":"BS39621206-1","price":16.47,"currency_code":"GBP","in_stock":true},{"title":"13mm (1\/2\") \/ 10 TPI","offer_id":53375178506506,"sku":"BS39621210-1","price":16.47,"currency_code":"GBP","in_stock":true},{"title":"13mm (1\/2\") \/ 14 TPI","offer_id":53375178539274,"sku":"BS39621214-1","price":16.47,"currency_code":"GBP","in_stock":true},{"title":"13mm (1\/2\") \/ 24 TPI","offer_id":53375178572042,"sku":"BS39621224-1","price":16.47,"currency_code":"GBP","in_stock":true},{"title":"19mm (3\/4\") \/ 04 TPI","offer_id":53375178604810,"sku":"BS39623404-1","price":21.62,"currency_code":"GBP","in_stock":true},{"title":"19mm (3\/4\") \/ 06 TPI","offer_id":53375178637578,"sku":"BS39623406-1","price":21.62,"currency_code":"GBP","in_stock":true},{"title":"19mm (3\/4\") \/ 10 TPI","offer_id":53375178670346,"sku":"BS39623410-1","price":21.62,"currency_code":"GBP","in_stock":true},{"title":"19mm (3\/4\") \/ 03 TPI","offer_id":53375178703114,"sku":"BS39623403-1","price":21.62,"currency_code":"GBP","in_stock":true},{"title":"25mm (1\") \/ 06 TPI","offer_id":53375178735882,"sku":"BS39620106-1","price":23.88,"currency_code":"GBP","in_stock":true},{"title":"25mm (1\") \/ 10 TPI","offer_id":53375178768650,"sku":"BS39620110-1","price":23.88,"currency_code":"GBP","in_stock":true},{"title":"25mm (1\") \/ 03 TPI","offer_id":53375178801418,"sku":"BS39620103-1","price":23.88,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/4195\/4570\/files\/01_Bandsaw_Blades_Main.jpg?v=1779357788"},{"product_id":"itech-compact-bs250-bandsaw-blade-1785mm-70-1-4-various-widths-tpi-xcalibur-tooling","title":"Itech Compact BS250 Bandsaw Blade 1785mm (70 1\/4\") - Various Widths \u0026 TPI - Xcalibur Tooling","description":"\u003ch2\u003eItech Compact BS250 Bandsaw Blade 1785mm – Precision-Engineered for UK Workshops\u003c\/h2\u003e\n\u003cp\u003eManufactured in the UK by\u003cspan\u003e \u003c\/span\u003e\u003cb\u003eXcalibur Tooling\u003c\/b\u003e, this 1785mm (70 1\/4\")bandsaw blade is engineered specifically for the\u003cspan\u003e \u003c\/span\u003e\u003cb\u003eItech Compact BS250\u003c\/b\u003e. Produced from high carbon steel, it is suitable for professional joinery shops, cabinet makers, and serious hobbyists looking for reliable performance in hardwood, softwood, MDF, plywood, and plastics. This blade is supplied in a 6mm width, ideal for tight curve work and general-purpose cutting, and is trusted by workshops across the UK for its consistency and longevity.\u003c\/p\u003e\n\u003cp\u003eEach blade is produced from\u003cspan\u003e \u003c\/span\u003e\u003cb\u003ehigh carbon steel (HCS)\u003c\/b\u003e, selected for its combination of flexibility and sharpness. The carbon content allows the blade to maintain a keen edge while providing fatigue resistance for extended service life. Teeth are precision-ground to a consistent geometry, with available TPI options (3, 4, 6, 10, 14, 18, 24) to suit a range of applications. For general woodwork, 6 TPI offers a balance of speed and finish; 3 to 4 TPI is suited to thick timber and fast rip cuts, while 10 to 14 TPI is recommended for smooth finishes in thin stock, plywood, and MDF. The tooth set and profile are optimised for clean chip removal and minimal burning, even in resinous or engineered woods.\u003c\/p\u003e\n\u003cp\u003eAll Xcalibur Tooling bandsaw blades are\u003cspan\u003e \u003c\/span\u003e\u003cb\u003eprecision-welded\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003eand ground in Cheshire. The weld joint is dressed flush to the blade body to eliminate bumps or clicks as the blade passes through the guides, reducing vibration and noise. Each blade is manufactured to strict dimensional tolerances for length, width, and thickness, ensuring correct tracking and tensioning on the Itech Compact BS250. Consistency across batches is maintained through controlled processes, so every blade seats accurately and performs reliably. The 6mm width allows a minimum curve radius of approximately 13mm, 19mm, 25mm making it suitable for intricate work as well as straight cuts.\u003c\/p\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMachine Compatibility:\u003c\/strong\u003e\u003cspan\u003e Itech compact BS250\u003c\/span\u003e (70 1\/4\" \/ 1785mm bandsaw)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlade Length:\u003c\/strong\u003e\u003cspan\u003e 1785mm (70 1\/4\")\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlade Width:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e6mm (1\/4\"), 10mm (3\/8\"), 13mm (1\/2\"), 19mm (3\/4\"), 25mm (1\")\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eHigh Carbon Steel (HCS)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThickness:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eStandard for Itech Compact BS250 (see machine manual for tension settings)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTeeth Per Inch (TPI):\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e3, 4, 6, 10, 14, 18, 24 (select as required)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTooth Form:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ePrecision-ground, optimised set for wood and plastics\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturing Origin:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eMade in the UK\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePack Size:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e1 blade\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eXcalibur Tooling\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eJoinery and cabinet making\u003c\/li\u003e\n\u003cli\u003eCurve cutting in hardwood and softwood\u003c\/li\u003e\n\u003cli\u003eGeneral-purpose workshop cutting\u003c\/li\u003e\n\u003cli\u003eSheet material processing (MDF, plywood)\u003c\/li\u003e\n\u003cli\u003ePlastic and laminate trimming\u003c\/li\u003e\n\u003cli\u003eFurniture and pattern making\u003c\/li\u003e\n\u003cli\u003eResawing thin timber (with appropriate TPI)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy Choose Xcalibur Tooling\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHigh carbon steel for flexibility and sharpness in wood applications\u003c\/li\u003e\n\u003cli\u003ePrecision-welded joint for smooth tracking and reduced vibration\u003c\/li\u003e\n\u003cli\u003eOver 45 years of UK manufacturing expertise\u003c\/li\u003e\n\u003cli\u003eTrusted by professionals and workshops across the UK\u003c\/li\u003e\n\u003cli\u003eQuality Guaranteed. Every blade batch is checked for weld and dimensional accuracy\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eShipping \u0026amp; Returns\u003c\/h3\u003e\n\u003cp\u003eAll orders are dispatched from Bramhall, Cheshire within 1-2 working days. Free standard delivery on all UK orders. Returns are accepted within 30 days. Item must be unused and in original packaging.\u003c\/p\u003e\n\u003ch3\u003ePayment\u003c\/h3\u003e\n\u003cp\u003ePayment is accepted via PayPal, credit card, or debit card through secure checkout. All prices include VAT where applicable.\u003c\/p\u003e\n\u003cp\u003eManufactured in the United Kingdom by Xcalibur Tooling. Over 45 years of manufacturing expertise. Quality Guaranteed. Trusted by Professionals.\u003c\/p\u003e\n\u003ch3\u003eFAQs\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Will this 1785mm bandsaw blade fit my Itech Compact BS250?\u003c\/strong\u003e\u003cbr\u003eA: Yes, this blade is manufactured to the exact 1785mm (70 1\/4\") length required for the Itech Compact BS250. The 6mm width is suitable for both straight and curved work. Manufactured in the UK by Xcalibur Tooling, each blade is checked for length and weld accuracy before dispatch, so you can fit and tension the blade with confidence.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Which TPI should I choose for cutting hardwood, softwood, or MDF?\u003c\/strong\u003e\u003cbr\u003eA: For thick hardwood or fast rip cuts, select 3 or 4 TPI for aggressive chip clearance. For general purpose use in mixed timbers, 6 TPI provides a good balance of speed and surface finish. For fine work in thin stock, MDF, or plywood, 10 to 14 TPI produces a smoother finish and minimises tear-out. Higher TPI options (18 to 24) are best for plastics or very thin materials. Each blade is ground to a consistent tooth form for clean, accurate cuts.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: What are the advantages of high carbon steel (HCS) in bandsaw blades?\u003c\/strong\u003e\u003cbr\u003eA: High carbon steel offers a combination of flexibility and sharpness ideal for woodworking. The carbon content allows the teeth to be hardened for edge retention, while the blade back remains flexible to resist fatigue and cracking. This makes HCS blades suitable for frequent use on benchtop and floor-standing bandsaws, providing a long service life when used with correct tension and feed rates.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Is this bandsaw blade made in the UK?\u003c\/strong\u003e\u003cbr\u003eA: Yes, all Xcalibur Tooling bandsaw blades are manufactured and welded in Cheshire, England. The entire process, from material selection to precision welding and finishing, is controlled in-house to maintain consistent quality. Xcalibur Tooling has over 45 years of UK manufacturing expertise and is trusted by workshops across the country.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: How do I select the right width and TPI for curve cutting or resawing?\u003c\/strong\u003e\u003cbr\u003eA: A 6mm (1\/4 inch) blade is ideal for tight curve work, allowing a minimum radius of approximately 15mm. For general straight cuts or light resawing, wider blades (10 to 13mm) offer better tracking and stability. TPI selection depends on material thickness and finish required: lower TPI for thick timber and faster cuts, higher TPI for thin stock and smooth finishes. Always match the blade width and TPI to your intended application for best results.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: What is the manufacturing process for Xcalibur Tooling bandsaw blades?\u003c\/strong\u003e\u003cbr\u003eA: Xcalibur Tooling bandsaw blades are manufactured in the UK using high carbon steel strip, which is precision cut to length. The ends are joined using a precision welding process, then ground flush to ensure a smooth, vibration-free joint. Each blade is then heat-treated to optimise hardness and flexibility, followed by precision grinding of the teeth to ensure consistent geometry and sharpness. Every blade undergoes strict quality checks for weld integrity, dimensional accuracy, and tooth form before dispatch.\u003c\/p\u003e","brand":"Xcalibur Tooling","offers":[{"title":"6mm (1\/4\") \/ 04 TPI","offer_id":53375223496970,"sku":"BS17851404-1","price":11.28,"currency_code":"GBP","in_stock":true},{"title":"6mm (1\/4\") \/ 06 TPI","offer_id":53375223529738,"sku":"BS17851406-1","price":11.28,"currency_code":"GBP","in_stock":true},{"title":"6mm (1\/4\") \/ 10 TPI","offer_id":53375223562506,"sku":"BS17851410-1","price":11.28,"currency_code":"GBP","in_stock":true},{"title":"6mm (1\/4\") \/ 14 TPI","offer_id":53375223595274,"sku":"BS17851414-1","price":11.28,"currency_code":"GBP","in_stock":true},{"title":"6mm (1\/4\") \/ 24 TPI","offer_id":53375223628042,"sku":"BS17851424-1","price":11.28,"currency_code":"GBP","in_stock":true},{"title":"10mm (3\/8\") \/ 04 TPI","offer_id":53375223660810,"sku":"BS17853804-1","price":11.71,"currency_code":"GBP","in_stock":true},{"title":"10mm (3\/8\") \/ 06 TPI","offer_id":53375223693578,"sku":"BS17853806-1","price":11.71,"currency_code":"GBP","in_stock":true},{"title":"10mm (3\/8\") \/ 10 TPI","offer_id":53375223726346,"sku":"BS17853810-1","price":11.71,"currency_code":"GBP","in_stock":true},{"title":"10mm (3\/8\") \/ 14 TPI","offer_id":53375223759114,"sku":"BS17853814-1","price":11.71,"currency_code":"GBP","in_stock":true},{"title":"10mm (3\/8\") \/ 18 TPI","offer_id":53375223791882,"sku":"BS17853818-1","price":11.71,"currency_code":"GBP","in_stock":true},{"title":"13mm (1\/2\") \/ 04 TPI","offer_id":53375223824650,"sku":"BS17851204-1","price":12.01,"currency_code":"GBP","in_stock":true},{"title":"13mm (1\/2\") \/ 06 TPI","offer_id":53375223857418,"sku":"BS17851206-1","price":12.01,"currency_code":"GBP","in_stock":true},{"title":"13mm (1\/2\") \/ 10 TPI","offer_id":53375223890186,"sku":"BS17851210-1","price":12.01,"currency_code":"GBP","in_stock":true},{"title":"13mm (1\/2\") \/ 14 TPI","offer_id":53375223922954,"sku":"BS17851214-1","price":12.01,"currency_code":"GBP","in_stock":true},{"title":"13mm (1\/2\") \/ 24 TPI","offer_id":53375223955722,"sku":"BS17851224-1","price":12.01,"currency_code":"GBP","in_stock":true},{"title":"19mm (3\/4\") \/ 04 TPI","offer_id":53375223988490,"sku":"BS17853404-1","price":13.79,"currency_code":"GBP","in_stock":true},{"title":"19mm (3\/4\") \/ 06 TPI","offer_id":53375224021258,"sku":"BS17853406-1","price":13.79,"currency_code":"GBP","in_stock":true},{"title":"19mm (3\/4\") \/ 10 TPI","offer_id":53375224054026,"sku":"BS17853410-1","price":13.79,"currency_code":"GBP","in_stock":true},{"title":"19mm (3\/4\") \/ 03 TPI","offer_id":53375224086794,"sku":"BS17853403-1","price":13.79,"currency_code":"GBP","in_stock":true},{"title":"25mm (1\") \/ 06 TPI","offer_id":53375224119562,"sku":"BS17850106-1","price":14.39,"currency_code":"GBP","in_stock":true},{"title":"25mm (1\") \/ 10 TPI","offer_id":53375224152330,"sku":"BS17850110-1","price":14.39,"currency_code":"GBP","in_stock":true},{"title":"25mm (1\") \/ 03 TPI","offer_id":53375224185098,"sku":"BS17850103-1","price":14.39,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/4195\/4570\/files\/01_Bandsaw_Blades_Main.jpg?v=1779357788"},{"product_id":"itech-r700-bandsaw-blade-5125mm-201-3-4-various-widths-tpi-xcalibur-tooling","title":"Itech R700 Bandsaw Blade 5125mm (201 3\/4\") - Various Widths \u0026 TPI - Xcalibur Tooling","description":"\u003ch2\u003eItech R700 Bandsaw Blade 5125mm – Precision-Engineered for UK Workshops\u003c\/h2\u003e\n\u003cp\u003eManufactured in the UK by\u003cspan\u003e \u003c\/span\u003e\u003cb\u003eXcalibur Tooling\u003c\/b\u003e, this 5125mm (201 3\/4\")bandsaw blade is engineered specifically for the\u003cspan\u003e \u003c\/span\u003e\u003cb\u003eItech R700\u003c\/b\u003e. Produced from high carbon steel, it is suitable for professional joinery shops, cabinet makers, and serious hobbyists looking for reliable performance in hardwood, softwood, MDF, plywood, and plastics. This blade is supplied in a 6mm width, ideal for tight curve work and general-purpose cutting, and is trusted by workshops across the UK for its consistency and longevity.\u003c\/p\u003e\n\u003cp\u003eEach blade is produced from\u003cspan\u003e \u003c\/span\u003e\u003cb\u003ehigh carbon steel (HCS)\u003c\/b\u003e, selected for its combination of flexibility and sharpness. The carbon content allows the blade to maintain a keen edge while providing fatigue resistance for extended service life. Teeth are precision-ground to a consistent geometry, with available TPI options (3, 4, 6, 10, 14, 18, 24) to suit a range of applications. For general woodwork, 6 TPI offers a balance of speed and finish; 3 to 4 TPI is suited to thick timber and fast rip cuts, while 10 to 14 TPI is recommended for smooth finishes in thin stock, plywood, and MDF. The tooth set and profile are optimised for clean chip removal and minimal burning, even in resinous or engineered woods.\u003c\/p\u003e\n\u003cp\u003eAll Xcalibur Tooling bandsaw blades are\u003cspan\u003e \u003c\/span\u003e\u003cb\u003eprecision-welded\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003eand ground in Cheshire. The weld joint is dressed flush to the blade body to eliminate bumps or clicks as the blade passes through the guides, reducing vibration and noise. Each blade is manufactured to strict dimensional tolerances for length, width, and thickness, ensuring correct tracking and tensioning on the Itech Compact BS250. Consistency across batches is maintained through controlled processes, so every blade seats accurately and performs reliably. The 6mm width allows a minimum curve radius of approximately 13mm, 19mm, 25mm making it suitable for intricate work as well as straight cuts.\u003c\/p\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMachine Compatibility:\u003c\/strong\u003e\u003cspan\u003e Itech R700 \u003c\/span\u003e(70 1\/4\" \/ 1785mm bandsaw)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlade Length:\u003c\/strong\u003e\u003cspan\u003e 5125mm (201 3\/4\")\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlade Width:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e6mm (1\/4\"), 10mm (3\/8\"), 13mm (1\/2\"), 19mm (3\/4\"), 25mm (1\")\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eHigh Carbon Steel (HCS)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThickness:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eStandard for Itech R700 (see machine manual for tension settings)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTeeth Per Inch (TPI):\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e3, 4, 6, 10, 14, 18, 24 (select as required)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTooth Form:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ePrecision-ground, optimised set for wood and plastics\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturing Origin:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eMade in the UK\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePack Size:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e1 blade\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eXcalibur Tooling\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eJoinery and cabinet making\u003c\/li\u003e\n\u003cli\u003eCurve cutting in hardwood and softwood\u003c\/li\u003e\n\u003cli\u003eGeneral-purpose workshop cutting\u003c\/li\u003e\n\u003cli\u003eSheet material processing (MDF, plywood)\u003c\/li\u003e\n\u003cli\u003ePlastic and laminate trimming\u003c\/li\u003e\n\u003cli\u003eFurniture and pattern making\u003c\/li\u003e\n\u003cli\u003eResawing thin timber (with appropriate TPI)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy Choose Xcalibur Tooling\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHigh carbon steel for flexibility and sharpness in wood applications\u003c\/li\u003e\n\u003cli\u003ePrecision-welded joint for smooth tracking and reduced vibration\u003c\/li\u003e\n\u003cli\u003eOver 45 years of UK manufacturing expertise\u003c\/li\u003e\n\u003cli\u003eTrusted by professionals and workshops across the UK\u003c\/li\u003e\n\u003cli\u003eQuality Guaranteed. Every blade batch is checked for weld and dimensional accuracy\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eShipping \u0026amp; Returns\u003c\/h3\u003e\n\u003cp\u003eAll orders are dispatched from Bramhall, Cheshire within 1-2 working days. Free standard delivery on all UK orders. Returns are accepted within 30 days. Item must be unused and in original packaging.\u003c\/p\u003e\n\u003ch3\u003ePayment\u003c\/h3\u003e\n\u003cp\u003ePayment is accepted via PayPal, credit card, or debit card through secure checkout. All prices include VAT where applicable.\u003c\/p\u003e\n\u003cp\u003eManufactured in the United Kingdom by Xcalibur Tooling. Over 45 years of manufacturing expertise. Quality Guaranteed. Trusted by Professionals.\u003c\/p\u003e\n\u003ch3\u003eFAQs\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Will this 5125mm bandsaw blade fit my Itech R700?\u003c\/strong\u003e\u003cbr\u003eA: Yes, this blade is manufactured to the exact 5125mm (201 3\/4\") length required for the Itech R700. The 6mm width is suitable for both straight and curved work. Manufactured in the UK by Xcalibur Tooling, each blade is checked for length and weld accuracy before dispatch, so you can fit and tension the blade with confidence.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Which TPI should I choose for cutting hardwood, softwood, or MDF?\u003c\/strong\u003e\u003cbr\u003eA: For thick hardwood or fast rip cuts, select 3 or 4 TPI for aggressive chip clearance. For general purpose use in mixed timbers, 6 TPI provides a good balance of speed and surface finish. For fine work in thin stock, MDF, or plywood, 10 to 14 TPI produces a smoother finish and minimises tear-out. Higher TPI options (18 to 24) are best for plastics or very thin materials. Each blade is ground to a consistent tooth form for clean, accurate cuts.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: What are the advantages of high carbon steel (HCS) in bandsaw blades?\u003c\/strong\u003e\u003cbr\u003eA: High carbon steel offers a combination of flexibility and sharpness ideal for woodworking. The carbon content allows the teeth to be hardened for edge retention, while the blade back remains flexible to resist fatigue and cracking. This makes HCS blades suitable for frequent use on benchtop and floor-standing bandsaws, providing a long service life when used with correct tension and feed rates.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Is this bandsaw blade made in the UK?\u003c\/strong\u003e\u003cbr\u003eA: Yes, all Xcalibur Tooling bandsaw blades are manufactured and welded in Cheshire, England. The entire process, from material selection to precision welding and finishing, is controlled in-house to maintain consistent quality. Xcalibur Tooling has over 45 years of UK manufacturing expertise and is trusted by workshops across the country.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: How do I select the right width and TPI for curve cutting or resawing?\u003c\/strong\u003e\u003cbr\u003eA: A 6mm (1\/4 inch) blade is ideal for tight curve work, allowing a minimum radius of approximately 15mm. For general straight cuts or light resawing, wider blades (10 to 13mm) offer better tracking and stability. TPI selection depends on material thickness and finish required: lower TPI for thick timber and faster cuts, higher TPI for thin stock and smooth finishes. Always match the blade width and TPI to your intended application for best results.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: What is the manufacturing process for Xcalibur Tooling bandsaw blades?\u003c\/strong\u003e\u003cbr\u003eA: Xcalibur Tooling bandsaw blades are manufactured in the UK using high carbon steel strip, which is precision cut to length. The ends are joined using a precision welding process, then ground flush to ensure a smooth, vibration-free joint. Each blade is then heat-treated to optimise hardness and flexibility, followed by precision grinding of the teeth to ensure consistent geometry and sharpness. Every blade undergoes strict quality checks for weld integrity, dimensional accuracy, and tooth form before dispatch.\u003c\/p\u003e","brand":"Xcalibur Tooling","offers":[{"title":"6mm (1\/4\") \/ 04 TPI","offer_id":53375255150858,"sku":"BS51251404-1","price":16.7,"currency_code":"GBP","in_stock":true},{"title":"6mm (1\/4\") \/ 06 TPI","offer_id":53375255183626,"sku":"BS51251406-1","price":16.7,"currency_code":"GBP","in_stock":true},{"title":"6mm (1\/4\") \/ 10 TPI","offer_id":53375255216394,"sku":"BS51251410-1","price":16.7,"currency_code":"GBP","in_stock":true},{"title":"6mm (1\/4\") \/ 14 TPI","offer_id":53375255249162,"sku":"BS51251414-1","price":16.7,"currency_code":"GBP","in_stock":true},{"title":"6mm (1\/4\") \/ 24 TPI","offer_id":53375255281930,"sku":"BS51251424-1","price":16.7,"currency_code":"GBP","in_stock":true},{"title":"10mm (3\/8\") \/ 04 TPI","offer_id":53375255314698,"sku":"BS51253804-1","price":17.92,"currency_code":"GBP","in_stock":true},{"title":"10mm (3\/8\") \/ 06 TPI","offer_id":53375255347466,"sku":"BS151253806-1","price":17.92,"currency_code":"GBP","in_stock":true},{"title":"10mm (3\/8\") \/ 10 TPI","offer_id":53375255380234,"sku":"BS51253810-1","price":17.92,"currency_code":"GBP","in_stock":true},{"title":"10mm (3\/8\") \/ 14 TPI","offer_id":53375255413002,"sku":"BS51253814-1","price":17.92,"currency_code":"GBP","in_stock":true},{"title":"10mm (3\/8\") \/ 18 TPI","offer_id":53375255445770,"sku":"BS51253818-1","price":17.92,"currency_code":"GBP","in_stock":true},{"title":"13mm (1\/2\") \/ 04 TPI","offer_id":53375255478538,"sku":"BS51251204-1","price":18.89,"currency_code":"GBP","in_stock":true},{"title":"13mm (1\/2\") \/ 06 TPI","offer_id":53375255511306,"sku":"BS51251206-1","price":18.89,"currency_code":"GBP","in_stock":true},{"title":"13mm (1\/2\") \/ 10 TPI","offer_id":53375255544074,"sku":"BS51251210-1","price":18.89,"currency_code":"GBP","in_stock":true},{"title":"13mm (1\/2\") \/ 14 TPI","offer_id":53375255576842,"sku":"BS151251214-1","price":18.89,"currency_code":"GBP","in_stock":true},{"title":"13mm (1\/2\") \/ 24 TPI","offer_id":53375255609610,"sku":"BS51251224-1","price":18.89,"currency_code":"GBP","in_stock":true},{"title":"19mm (3\/4\") \/ 04 TPI","offer_id":53375255642378,"sku":"BS51253404-1","price":24.8,"currency_code":"GBP","in_stock":true},{"title":"19mm (3\/4\") \/ 06 TPI","offer_id":53375255675146,"sku":"BS51253406-1","price":24.8,"currency_code":"GBP","in_stock":true},{"title":"19mm (3\/4\") \/ 10 TPI","offer_id":53375255707914,"sku":"BS51253410-1","price":24.8,"currency_code":"GBP","in_stock":true},{"title":"19mm (3\/4\") \/ 03 TPI","offer_id":53375255740682,"sku":"BS51253403-1","price":24.8,"currency_code":"GBP","in_stock":true},{"title":"25mm (1\") \/ 06 TPI","offer_id":53375255773450,"sku":"BS51250106-1","price":27.74,"currency_code":"GBP","in_stock":true},{"title":"25mm (1\") \/ 10 TPI","offer_id":53375255806218,"sku":"BS51250110-1","price":27.74,"currency_code":"GBP","in_stock":true},{"title":"25mm (1\") \/ 03 TPI","offer_id":53375255838986,"sku":"BS51250103-1","price":27.74,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/4195\/4570\/files\/01_Bandsaw_Blades_Main.jpg?v=1779357788"}],"url":"https:\/\/www.woodfordtooling.com\/de\/collections\/bandsaw-blades-for-itech-machines.oembed","provider":"Woodford Woodworking Tooling Ltd.","version":"1.0","type":"link"}