{"title":"Bandsaw Blades on Sale","description":null,"products":[{"product_id":"0690mm-27-x-13mm-1-2-x-14-tpi-bandsaw-blade","title":"0690mm (27\") X 13mm (1\/2\") X 14 TPI Bandsaw Blade","description":"\u003ch2\u003e0690mm Bandsaw Blade, High Carbon Steel, Precision Welded Performance\u003c\/h2\u003e\n\u003cp\u003eManufactured in the UK by\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eXcalibur Tooling\u003c\/strong\u003e, this 0690mm bandsaw blade is engineered for professional woodworking and joinery applications. Compatible with all bandsaws requiring a 0690mm (27\") blade length, it is suitable for trade workshops, cabinet makers, furniture manufacturers, and fabrication shops. The 13mm width offers an ideal balance between straight cutting and controlled curve capability, while the high carbon steel construction delivers reliable performance across hardwood, softwood, MDF, plywood, laminated panels, plastics, and acrylics.\u003c\/p\u003e\n\u003cp\u003eThis blade is produced from premium\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003ehigh carbon steel (HCS)\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003estrip, selected for its flexible carbon back and sharp, hardened teeth. The steel is heat-treated and tempered to achieve an optimal combination of edge retention and fatigue resistance. Each tooth is precision ground and set to a standard raker configuration, with the entire blade ground to a consistent 0.6mm thickness. The cutting geometry is optimised for woodworking, with a typical tooth angle of 10 to 15 degrees and a raker set for efficient chip clearance. The blade is available in a full range of TPI options:\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e14, TPI\u003c\/strong\u003e. While higher TPI (10, 14, 24) delivers fine, clean finishes on thin stock, MDF, plywood, laminates, plastics, and acrylic sheet. The flexible carbon back minimises the risk of fatigue cracks, supporting long service life even under continuous workshop use.\u003c\/p\u003e\n\u003cp\u003eAll Xcalibur Tooling bandsaw blades are\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eprecision welded\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ein-house at the Bramhall, Cheshire facility. Each weld joint is ground smooth and batch-tested for concentricity, eliminating vibration, noise, and tracking issues common with lower quality imports. Dimensional tolerances are tightly controlled: blade length is held within ±0.2mm, width within ±0.1mm, and thickness within ±0.02mm. This ensures accurate seating in the bandsaw guides, consistent tensioning, and a superior surface finish on all materials. The low vibration design supports accurate, straight cuts and reduces blade wander, making it suitable for both straight and gentle curve work. Each blade is supplied coiled for safe storage and transport, with guidance to store in dry conditions to prevent corrosion.\u003c\/p\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMachine Compatibility:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eCompatible with bandsaws requiring 0690mm (27 Inches) blade length\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlade Length:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e0690 mm (27\")\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlade Width:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e13mm (1\/2\")\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlade Thickness:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e0.6 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eHigh Carbon Steel (HCS), heat-treated and tempered\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTooth Form:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eRaker set, precision ground\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTooth Pitch (TPI):\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e14 TPI\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePack Size:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e1 blade\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturing Origin:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eMade in the UK by Xcalibur Tooling\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eJoinery and cabinet making\u003c\/li\u003e\n\u003cli\u003eFurniture manufacturing and component cutting\u003c\/li\u003e\n\u003cli\u003eHardwood and softwood board processing\u003c\/li\u003e\n\u003cli\u003eMDF, plywood, and laminated panel sizing\u003c\/li\u003e\n\u003cli\u003ePlastic and acrylic sheet cutting (use 14 or 24 TPI)\u003c\/li\u003e\n\u003cli\u003eGeneral purpose woodworking in professional workshops\u003c\/li\u003e\n\u003cli\u003eStraight cutting and controlled curve work\u003c\/li\u003e\n\u003cli\u003eShaping and profiling timber components\u003c\/li\u003e\n\u003cli\u003eLight resawing of medium thickness boards\u003c\/li\u003e\n\u003cli\u003eContinuous production or fabrication shop use\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy Choose Xcalibur Tooling\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHigh carbon steel for flexible fatigue resistance and sharp cutting teeth\u003c\/li\u003e\n\u003cli\u003ePrecision welded joint for smooth tracking and low vibration\u003c\/li\u003e\n\u003cli\u003eAvailable in multiple TPI options for coarse to fine cutting\u003c\/li\u003e\n\u003cli\u003eOver 45 years of UK manufacturing expertise\u003c\/li\u003e\n\u003cli\u003eQuality Guaranteed and trusted by workshops across the UK\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eShipping \u0026amp; Returns\u003c\/h3\u003e\n\u003cp\u003eAll orders are dispatched from Bramhall, Cheshire within 1-2 working days. Free standard delivery on all UK orders. Returns are accepted within 30 days. The item must be unused and in original packaging.\u003c\/p\u003e\n\u003ch3\u003ePayment\u003c\/h3\u003e\n\u003cp\u003ePayment is accepted via PayPal, credit card, or debit card through secure checkout. All prices include VAT where applicable.\u003c\/p\u003e\n\u003cp\u003eManufactured in the United Kingdom by Xcalibur Tooling. Over 45 years of manufacturing expertise. Quality Guaranteed. Trusted by Professionals.\u003c\/p\u003e\n\u003ch3\u003eFAQs\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Will this 0690mm bandsaw blade fit my machine?\u003c\/strong\u003e\u003cbr\u003eA: This blade is compatible with any bandsaw that requires a 0690mm (27 inch) blade length. The 13mm width and 0.6mm thickness are standard for professional woodworking machines. Always check your machine's manual or measure the required blade length before ordering. Xcalibur Tooling blades are manufactured to strict tolerances for reliable fit and tracking.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Which TPI should I choose for cutting hardwood, MDF, or plastics?\u003c\/strong\u003e\u003cbr\u003eA: For thick hardwood or rapid rip cuts, select 14 TPI. For fine finishing in MDF, plywood, laminates, or plastics, use 14 Higher TPI produces a smoother surface and reduces chip-out on brittle materials. Xcalibur Tooling offers all these options to match your application.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: What are the benefits of high carbon steel (HCS) bandsaw blades?\u003c\/strong\u003e\u003cbr\u003eA: High carbon steel provides a flexible blade back for long fatigue life and sharp, hardened teeth for clean wood cutting. The steel is heat-treated and tempered, achieving a balance between edge retention and flexibility. HCS blades are ideal for woodworking, as they can be resharpened and maintain consistent performance across a wide range of materials.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Is this bandsaw blade made in the UK?\u003c\/strong\u003e\u003cbr\u003eA: Yes, all Xcalibur Tooling bandsaw blades are manufactured in Bramhall, Cheshire. The blades are precision welded and ground in-house, with every batch checked for weld quality and dimensional accuracy. Xcalibur Tooling is a UK manufacturer with over 45 years of experience supplying professional workshops.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: How does the 13mm width affect curve cutting and straight cutting?\u003c\/strong\u003e\u003cbr\u003eA: A 13mm (1\/2 inch) wide blade provides excellent stability for straight cuts and light resawing. It is also capable of controlled curve work, typically down to a radius of around 60mm. For tighter curves, a narrower blade is recommended. The 13mm width is a versatile choice for most joinery, furniture, and general workshop applications.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: How is the blade manufactured for durability and precision?\u003c\/strong\u003e\u003cbr\u003eA: Each Xcalibur Tooling bandsaw blade is produced from high carbon steel strip, which is heat-treated and tempered to achieve optimal hardness and flexibility. The teeth are precision ground and set to a raker configuration, ensuring efficient chip clearance and smooth cutting. The blade is then precision welded and ground at our UK facility, with strict quality control checks for weld integrity, dimensional accuracy, and surface finish. This process ensures a long service life and consistent performance in demanding workshop environments.\u003c\/p\u003e","brand":"Xcalibur Tooling","offers":[{"title":"Default Title","offer_id":53480001667338,"sku":"BS06901214-1","price":8.2,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/4195\/4570\/files\/01_Bandsaw_Blades_Main.jpg?v=1779357788"},{"product_id":"0690mm-27-x-13mm-1-2-x-24-tpi-bandsaw-blade","title":"0690mm (27\") X 13mm (1\/2\") X 24 TPI Bandsaw Blade","description":"\u003ch2\u003e0690mm Bandsaw Blade, High Carbon Steel, Precision Welded Performance\u003c\/h2\u003e\n\u003cp\u003eManufactured in the UK by\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eXcalibur Tooling\u003c\/strong\u003e, this 0690mm bandsaw blade is engineered for professional woodworking and joinery applications. Compatible with all bandsaws requiring a 0690mm (27\") blade length, it is suitable for trade workshops, cabinet makers, furniture manufacturers, and fabrication shops. The 13mm width offers an ideal balance between straight cutting and controlled curve capability, while the high carbon steel construction delivers reliable performance across hardwood, softwood, MDF, plywood, laminated panels, plastics, and acrylics.\u003c\/p\u003e\n\u003cp\u003eThis blade is produced from premium\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003ehigh carbon steel (HCS)\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003estrip, selected for its flexible carbon back and sharp, hardened teeth. The steel is heat-treated and tempered to achieve an optimal combination of edge retention and fatigue resistance. Each tooth is precision ground and set to a standard raker configuration, with the entire blade ground to a consistent 0.6mm thickness. The cutting geometry is optimised for woodworking, with a typical tooth angle of 10 to 15 degrees and a raker set for efficient chip clearance. The blade is available in a full range of TPI options:\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e24, TPI\u003c\/strong\u003e. While higher TPI (24) delivers fine, clean finishes on thin stock, MDF, plywood, laminates, plastics, and acrylic sheet. The flexible carbon back minimises the risk of fatigue cracks, supporting long service life even under continuous workshop use.\u003c\/p\u003e\n\u003cp\u003eAll Xcalibur Tooling bandsaw blades are\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eprecision welded\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ein-house at the Bramhall, Cheshire facility. Each weld joint is ground smooth and batch-tested for concentricity, eliminating vibration, noise, and tracking issues common with lower quality imports. Dimensional tolerances are tightly controlled: blade length is held within ±0.2mm, width within ±0.1mm, and thickness within ±0.02mm. This ensures accurate seating in the bandsaw guides, consistent tensioning, and a superior surface finish on all materials. The low vibration design supports accurate, straight cuts and reduces blade wander, making it suitable for both straight and gentle curve work. Each blade is supplied coiled for safe storage and transport, with guidance to store in dry conditions to prevent corrosion.\u003c\/p\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMachine Compatibility:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eCompatible with bandsaws requiring 0690mm (27 Inches) blade length\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlade Length:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e0690 mm (27\")\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlade Width:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e13mm (1\/2\")\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlade Thickness:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e0.6 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eHigh Carbon Steel (HCS), heat-treated and tempered\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTooth Form:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eRaker set, precision ground\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTooth Pitch (TPI):\u003c\/strong\u003e\u003cspan\u003e 2\u003c\/span\u003e4 TPI\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePack Size:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e1 blade\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturing Origin:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eMade in the UK by Xcalibur Tooling\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eJoinery and cabinet making\u003c\/li\u003e\n\u003cli\u003eFurniture manufacturing and component cutting\u003c\/li\u003e\n\u003cli\u003eHardwood and softwood board processing\u003c\/li\u003e\n\u003cli\u003eMDF, plywood, and laminated panel sizing\u003c\/li\u003e\n\u003cli\u003ePlastic and acrylic sheet cutting (use 14 or 24 TPI)\u003c\/li\u003e\n\u003cli\u003eGeneral purpose woodworking in professional workshops\u003c\/li\u003e\n\u003cli\u003eStraight cutting and controlled curve work\u003c\/li\u003e\n\u003cli\u003eShaping and profiling timber components\u003c\/li\u003e\n\u003cli\u003eLight resawing of medium thickness boards\u003c\/li\u003e\n\u003cli\u003eContinuous production or fabrication shop use\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy Choose Xcalibur Tooling\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHigh carbon steel for flexible fatigue resistance and sharp cutting teeth\u003c\/li\u003e\n\u003cli\u003ePrecision welded joint for smooth tracking and low vibration\u003c\/li\u003e\n\u003cli\u003eAvailable in multiple TPI options for coarse to fine cutting\u003c\/li\u003e\n\u003cli\u003eOver 45 years of UK manufacturing expertise\u003c\/li\u003e\n\u003cli\u003eQuality Guaranteed and trusted by workshops across the UK\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eShipping \u0026amp; Returns\u003c\/h3\u003e\n\u003cp\u003eAll orders are dispatched from Bramhall, Cheshire within 1-2 working days. Free standard delivery on all UK orders. Returns are accepted within 30 days. The item must be unused and in original packaging.\u003c\/p\u003e\n\u003ch3\u003ePayment\u003c\/h3\u003e\n\u003cp\u003ePayment is accepted via PayPal, credit card, or debit card through secure checkout. All prices include VAT where applicable.\u003c\/p\u003e\n\u003cp\u003eManufactured in the United Kingdom by Xcalibur Tooling. Over 45 years of manufacturing expertise. Quality Guaranteed. Trusted by Professionals.\u003c\/p\u003e\n\u003ch3\u003eFAQs\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Will this 0690mm bandsaw blade fit my machine?\u003c\/strong\u003e\u003cbr\u003eA: This blade is compatible with any bandsaw that requires a 0690mm (27 inch) blade length. The 13mm width and 0.6mm thickness are standard for professional woodworking machines. Always check your machine's manual or measure the required blade length before ordering. Xcalibur Tooling blades are manufactured to strict tolerances for reliable fit and tracking.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Which TPI should I choose for cutting hardwood, MDF, or plastics?\u003c\/strong\u003e\u003cbr\u003eA: For thick hardwood or rapid rip cuts, select 24 TPI. For fine finishing in MDF, plywood, laminates, or plastics, use 24 Higher TPI produces a smoother surface and reduces chip-out on brittle materials. Xcalibur Tooling offers all these options to match your application.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: What are the benefits of high carbon steel (HCS) bandsaw blades?\u003c\/strong\u003e\u003cbr\u003eA: High carbon steel provides a flexible blade back for long fatigue life and sharp, hardened teeth for clean wood cutting. The steel is heat-treated and tempered, achieving a balance between edge retention and flexibility. HCS blades are ideal for woodworking, as they can be resharpened and maintain consistent performance across a wide range of materials.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Is this bandsaw blade made in the UK?\u003c\/strong\u003e\u003cbr\u003eA: Yes, all Xcalibur Tooling bandsaw blades are manufactured in Bramhall, Cheshire. The blades are precision welded and ground in-house, with every batch checked for weld quality and dimensional accuracy. Xcalibur Tooling is a UK manufacturer with over 45 years of experience supplying professional workshops.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: How does the 13mm width affect curve cutting and straight cutting?\u003c\/strong\u003e\u003cbr\u003eA: A 13mm (1\/2 inch) wide blade provides excellent stability for straight cuts and light resawing. It is also capable of controlled curve work, typically down to a radius of around 60mm. For tighter curves, a narrower blade is recommended. The 13mm width is a versatile choice for most joinery, furniture, and general workshop applications.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: How is the blade manufactured for durability and precision?\u003c\/strong\u003e\u003cbr\u003eA: Each Xcalibur Tooling bandsaw blade is produced from high carbon steel strip, which is heat-treated and tempered to achieve optimal hardness and flexibility. The teeth are precision ground and set to a raker configuration, ensuring efficient chip clearance and smooth cutting. The blade is then precision welded and ground at our UK facility, with strict quality control checks for weld integrity, dimensional accuracy, and surface finish. This process ensures a long service life and consistent performance in demanding workshop environments.\u003c\/p\u003e","brand":"Xcalibur Tooling","offers":[{"title":"Default Title","offer_id":53480467169546,"sku":"BS06901224-1","price":8.2,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/4195\/4570\/files\/01_Bandsaw_Blades_Main.jpg?v=1779357788"},{"product_id":"0835mm-27-x-13mm-1-2-x-14-tpi-bandsaw-blade","title":"0835mm (27\") X 13mm (1\/2\") X 14 TPI Bandsaw Blade","description":"\u003ch2\u003e0835mm Bandsaw Blade, High Carbon Steel, Precision Welded Performance\u003c\/h2\u003e\n\u003cp\u003eManufactured in the UK by\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eXcalibur Tooling\u003c\/strong\u003e, this 0690mm bandsaw blade is engineered for professional woodworking and joinery applications. Compatible with all bandsaws requiring a 0835mm (32 7\/8\") blade length, it is suitable for trade workshops, cabinet makers, furniture manufacturers, and fabrication shops. The 13mm width offers an ideal balance between straight cutting and controlled curve capability, while the high carbon steel construction delivers reliable performance across hardwood, softwood, MDF, plywood, laminated panels, plastics, and acrylics.\u003c\/p\u003e\n\u003cp\u003eThis blade is produced from premium\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003ehigh carbon steel (HCS)\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003estrip, selected for its flexible carbon back and sharp, hardened teeth. The steel is heat-treated and tempered to achieve an optimal combination of edge retention and fatigue resistance. Each tooth is precision ground and set to a standard raker configuration, with the entire blade ground to a consistent 0.6mm thickness. The cutting geometry is optimised for woodworking, with a typical tooth angle of 10 to 15 degrees and a raker set for efficient chip clearance. The blade is available in a full range of TPI options:\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e14, TPI\u003c\/strong\u003e. While higher TPI (14) delivers fine, clean finishes on thin stock, MDF, plywood, laminates, plastics, and acrylic sheet. The flexible carbon back minimises the risk of fatigue cracks, supporting long service life even under continuous workshop use.\u003c\/p\u003e\n\u003cp\u003eAll Xcalibur Tooling bandsaw blades are\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eprecision welded\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ein-house at the Bramhall, Cheshire facility. Each weld joint is ground smooth and batch-tested for concentricity, eliminating vibration, noise, and tracking issues common with lower quality imports. Dimensional tolerances are tightly controlled: blade length is held within ±0.2mm, width within ±0.1mm, and thickness within ±0.02mm. This ensures accurate seating in the bandsaw guides, consistent tensioning, and a superior surface finish on all materials. The low vibration design supports accurate, straight cuts and reduces blade wander, making it suitable for both straight and gentle curve work. Each blade is supplied coiled for safe storage and transport, with guidance to store in dry conditions to prevent corrosion.\u003c\/p\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMachine Compatibility:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eCompatible with bandsaws requiring 0835mm (32 7\/8 Inches) blade length\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlade Length:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e0835 mm (32 7\/8\")\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlade Width:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e13mm (1\/2\")\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlade Thickness:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e0.6 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eHigh Carbon Steel (HCS), heat-treated and tempered\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTooth Form:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eRaker set, precision ground\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTooth Pitch (TPI):\u003c\/strong\u003e\u003cspan\u003e 2\u003c\/span\u003e4 TPI\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePack Size:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e1 blade\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturing Origin:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eMade in the UK by Xcalibur Tooling\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eJoinery and cabinet making\u003c\/li\u003e\n\u003cli\u003eFurniture manufacturing and component cutting\u003c\/li\u003e\n\u003cli\u003eHardwood and softwood board processing\u003c\/li\u003e\n\u003cli\u003eMDF, plywood, and laminated panel sizing\u003c\/li\u003e\n\u003cli\u003ePlastic and acrylic sheet cutting (use 14 or 24 TPI)\u003c\/li\u003e\n\u003cli\u003eGeneral purpose woodworking in professional workshops\u003c\/li\u003e\n\u003cli\u003eStraight cutting and controlled curve work\u003c\/li\u003e\n\u003cli\u003eShaping and profiling timber components\u003c\/li\u003e\n\u003cli\u003eLight resawing of medium thickness boards\u003c\/li\u003e\n\u003cli\u003eContinuous production or fabrication shop use\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy Choose Xcalibur Tooling\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHigh carbon steel for flexible fatigue resistance and sharp cutting teeth\u003c\/li\u003e\n\u003cli\u003ePrecision welded joint for smooth tracking and low vibration\u003c\/li\u003e\n\u003cli\u003eAvailable in multiple TPI options for coarse to fine cutting\u003c\/li\u003e\n\u003cli\u003eOver 45 years of UK manufacturing expertise\u003c\/li\u003e\n\u003cli\u003eQuality Guaranteed and trusted by workshops across the UK\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eShipping \u0026amp; Returns\u003c\/h3\u003e\n\u003cp\u003eAll orders are dispatched from Bramhall, Cheshire within 1-2 working days. Free standard delivery on all UK orders. Returns are accepted within 30 days. The item must be unused and in original packaging.\u003c\/p\u003e\n\u003ch3\u003ePayment\u003c\/h3\u003e\n\u003cp\u003ePayment is accepted via PayPal, credit card, or debit card through secure checkout. All prices include VAT where applicable.\u003c\/p\u003e\n\u003cp\u003eManufactured in the United Kingdom by Xcalibur Tooling. Over 45 years of manufacturing expertise. Quality Guaranteed. Trusted by Professionals.\u003c\/p\u003e\n\u003ch3\u003eFAQs\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Will this 0835mm bandsaw blade fit my machine?\u003c\/strong\u003e\u003cbr\u003eA: This blade is compatible with any bandsaw that requires a 0835mm (32 7\/8\") blade length. The 13mm width and 0.6mm thickness are standard for professional woodworking machines. Always check your machine's manual or measure the required blade length before ordering. Xcalibur Tooling blades are manufactured to strict tolerances for reliable fit and tracking.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Which TPI should I choose for cutting hardwood, MDF, or plastics?\u003c\/strong\u003e\u003cbr\u003eA: For thick hardwood or rapid rip cuts, select 14 TPI. For fine finishing in MDF, plywood, laminates, or plastics, use 14 Higher TPI produces a smoother surface and reduces chip-out on brittle materials. Xcalibur Tooling offers all these options to match your application.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: What are the benefits of high carbon steel (HCS) bandsaw blades?\u003c\/strong\u003e\u003cbr\u003eA: High carbon steel provides a flexible blade back for long fatigue life and sharp, hardened teeth for clean wood cutting. The steel is heat-treated and tempered, achieving a balance between edge retention and flexibility. HCS blades are ideal for woodworking, as they can be resharpened and maintain consistent performance across a wide range of materials.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Is this bandsaw blade made in the UK?\u003c\/strong\u003e\u003cbr\u003eA: Yes, all Xcalibur Tooling bandsaw blades are manufactured in Bramhall, Cheshire. The blades are precision welded and ground in-house, with every batch checked for weld quality and dimensional accuracy. Xcalibur Tooling is a UK manufacturer with over 45 years of experience supplying professional workshops.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: How does the 13mm width affect curve cutting and straight cutting?\u003c\/strong\u003e\u003cbr\u003eA: A 13mm (1\/2 inch) wide blade provides excellent stability for straight cuts and light resawing. It is also capable of controlled curve work, typically down to a radius of around 60mm. For tighter curves, a narrower blade is recommended. The 13mm width is a versatile choice for most joinery, furniture, and general workshop applications.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: How is the blade manufactured for durability and precision?\u003c\/strong\u003e\u003cbr\u003eA: Each Xcalibur Tooling bandsaw blade is produced from high carbon steel strip, which is heat-treated and tempered to achieve optimal hardness and flexibility. The teeth are precision ground and set to a raker configuration, ensuring efficient chip clearance and smooth cutting. The blade is then precision welded and ground at our UK facility, with strict quality control checks for weld integrity, dimensional accuracy, and surface finish. This process ensures a long service life and consistent performance in demanding workshop environments.\u003c\/p\u003e","brand":"Xcalibur Tooling","offers":[{"title":"Default Title","offer_id":53480699920650,"sku":"BS08351214-1","price":8.2,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/4195\/4570\/files\/01_Bandsaw_Blades_Main.jpg?v=1779357788"},{"product_id":"1070mm-42-1-8-x-13mm-1-2-x-14-tpi-bandsaw-blade","title":"1070mm (42 1\/8\") X 13mm (1\/2\") X 14 TPI Bandsaw Blade","description":"\u003ch2\u003e1070mm Bandsaw Blade, High Carbon Steel, Precision Welded Performance\u003c\/h2\u003e\n\u003cp\u003eManufactured in the UK by\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eXcalibur Tooling\u003c\/strong\u003e, this 1070mm bandsaw blade is engineered for professional woodworking and joinery applications. Compatible with all bandsaw requiring a 1070mm (42 1\/8\") blade length, it is suitable for trade workshops, cabinet makers, furniture manufacturers, and fabrication shops. The 13mm width offers an ideal balance between straight cutting and controlled curve capability, while the high carbon steel construction delivers reliable performance across hardwood, softwood, MDF, plywood, laminated panels, plastics, and acrylics.\u003c\/p\u003e\n\u003cp\u003eThis blade is produced from premium\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003ehigh carbon steel (HCS)\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003estrip, selected for its flexible carbon back and sharp, hardened teeth. The steel is heat-treated and tempered to achieve an optimal combination of edge retention and fatigue resistance. Each tooth is precision ground and set to a standard raker configuration, with the entire blade ground to a consistent 0.6mm thickness. The cutting geometry is optimised for woodworking, with a typical tooth angle of 10 to 15 degrees and a raker set for efficient chip clearance. The blade is available in a full range of TPI options:\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e08 TPI\u003c\/strong\u003e. While higher TPI (08) delivers fine, clean finishes on thin stock, MDF, plywood, laminates, plastics, and acrylic sheet. The flexible carbon back minimises the risk of fatigue cracks, supporting long service life even under continuous workshop use.\u003c\/p\u003e\n\u003cp\u003eAll Xcalibur Tooling bandsaw blades are\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eprecision welded\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ein-house at the Bramhall, Cheshire facility. Each weld joint is ground smooth and batch-tested for concentricity, eliminating vibration, noise, and tracking issues common with lower quality imports. Dimensional tolerances are tightly controlled: blade length is held within ±0.2mm, width within ±0.1mm, and thickness within ±0.02mm. This ensures accurate seating in the bandsaw guides, consistent tensioning, and a superior surface finish on all materials. The low vibration design supports accurate, straight cuts and reduces blade wander, making it suitable for both straight and gentle curve work. Each blade is supplied coiled for safe storage and transport, with guidance to store in dry conditions to prevent corrosion.\u003c\/p\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMachine Compatibility:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eCompatible with bandsaws requiring 1070mm (42 1\/8 Inches) blade length\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlade Length:\u003c\/strong\u003e\u003cspan\u003e 1070\u003c\/span\u003e mm (42 1\/8\")\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlade Width:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e13mm (1\/2\")\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlade Thickness:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e0.6 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eHigh Carbon Steel (HCS), heat-treated and tempered\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTooth Form:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eRaker set, precision ground\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTooth Pitch (TPI):\u003c\/strong\u003e\u003cspan\u003e 2\u003c\/span\u003e4 TPI\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePack Size:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e1 blade\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturing Origin:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eMade in the UK by Xcalibur Tooling\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eJoinery and cabinet making\u003c\/li\u003e\n\u003cli\u003eFurniture manufacturing and component cutting\u003c\/li\u003e\n\u003cli\u003eHardwood and softwood board processing\u003c\/li\u003e\n\u003cli\u003eMDF, plywood, and laminated panel sizing\u003c\/li\u003e\n\u003cli\u003ePlastic and acrylic sheet cutting (use 14 or 24 TPI)\u003c\/li\u003e\n\u003cli\u003eGeneral purpose woodworking in professional workshops\u003c\/li\u003e\n\u003cli\u003eStraight cutting and controlled curve work\u003c\/li\u003e\n\u003cli\u003eShaping and profiling timber components\u003c\/li\u003e\n\u003cli\u003eLight resawing of medium thickness boards\u003c\/li\u003e\n\u003cli\u003eContinuous production or fabrication shop use\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy Choose Xcalibur Tooling\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHigh carbon steel for flexible fatigue resistance and sharp cutting teeth\u003c\/li\u003e\n\u003cli\u003ePrecision welded joint for smooth tracking and low vibration\u003c\/li\u003e\n\u003cli\u003eAvailable in multiple TPI options for coarse to fine cutting\u003c\/li\u003e\n\u003cli\u003eOver 45 years of UK manufacturing expertise\u003c\/li\u003e\n\u003cli\u003eQuality Guaranteed and trusted by workshops across the UK\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eShipping \u0026amp; Returns\u003c\/h3\u003e\n\u003cp\u003eAll orders are dispatched from Bramhall, Cheshire within 1-2 working days. Free standard delivery on all UK orders. Returns are accepted within 30 days. The item must be unused and in original packaging.\u003c\/p\u003e\n\u003ch3\u003ePayment\u003c\/h3\u003e\n\u003cp\u003ePayment is accepted via PayPal, credit card, or debit card through secure checkout. All prices include VAT where applicable.\u003c\/p\u003e\n\u003cp\u003eManufactured in the United Kingdom by Xcalibur Tooling. Over 45 years of manufacturing expertise. Quality Guaranteed. Trusted by Professionals.\u003c\/p\u003e\n\u003ch3\u003eFAQs\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Will this 0835mm bandsaw blade fit my machine?\u003c\/strong\u003e\u003cbr\u003eA: This blade is compatible with any bandsaw that requires a 0835mm (32 7\/8\") blade length. The 13mm width and 0.6mm thickness are standard for professional woodworking machines. Always check your machine's manual or measure the required blade length before ordering. Xcalibur Tooling blades are manufactured to strict tolerances for reliable fit and tracking.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Which TPI should I choose for cutting hardwood, MDF, or plastics?\u003c\/strong\u003e\u003cbr\u003eA: For thick hardwood or rapid rip cuts, select 14 TPI. For fine finishing in MDF, plywood, laminates, or plastics, use 14 Higher TPI produces a smoother surface and reduces chip-out on brittle materials. Xcalibur Tooling offers all these options to match your application.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: What are the benefits of high carbon steel (HCS) bandsaw blades?\u003c\/strong\u003e\u003cbr\u003eA: High carbon steel provides a flexible blade back for long fatigue life and sharp, hardened teeth for clean wood cutting. The steel is heat-treated and tempered, achieving a balance between edge retention and flexibility. HCS blades are ideal for woodworking, as they can be resharpened and maintain consistent performance across a wide range of materials.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Is this bandsaw blade made in the UK?\u003c\/strong\u003e\u003cbr\u003eA: Yes, all Xcalibur Tooling bandsaw blades are manufactured in Bramhall, Cheshire. The blades are precision welded and ground in-house, with every batch checked for weld quality and dimensional accuracy. Xcalibur Tooling is a UK manufacturer with over 45 years of experience supplying professional workshops.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: How does the 13mm width affect curve cutting and straight cutting?\u003c\/strong\u003e\u003cbr\u003eA: A 13mm (1\/2 inch) wide blade provides excellent stability for straight cuts and light resawing. It is also capable of controlled curve work, typically down to a radius of around 60mm. For tighter curves, a narrower blade is recommended. The 13mm width is a versatile choice for most joinery, furniture, and general workshop applications.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: How is the blade manufactured for durability and precision?\u003c\/strong\u003e\u003cbr\u003eA: Each Xcalibur Tooling bandsaw blade is produced from high carbon steel strip, which is heat-treated and tempered to achieve optimal hardness and flexibility. The teeth are precision ground and set to a raker configuration, ensuring efficient chip clearance and smooth cutting. The blade is then precision welded and ground at our UK facility, with strict quality control checks for weld integrity, dimensional accuracy, and surface finish. This process ensures a long service life and consistent performance in demanding workshop environments.\u003c\/p\u003e","brand":"Xcalibur Tooling","offers":[{"title":"Default Title","offer_id":53480716304650,"sku":"BS10701408-1","price":8.2,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0852\/4195\/4570\/files\/01_Bandsaw_Blades_Main.jpg?v=1779357788"}],"url":"https:\/\/www.woodfordtooling.com\/collections\/bandsaw-blades-on-sale.oembed","provider":"Woodford Woodworking Tooling Ltd.","version":"1.0","type":"link"}